Anyone have advice as to the best finish to put on an oak fret board and how you go about it? Normally I use almond oil on rosewood fret boards but was not sure about oak. Thanks for any info.

Views: 214

Reply to This

Replies to This Discussion

I have had great success using super glue as a grain filler on open pore wood such as oak, walnut and mahogany. I use a old credit card / gift card type plastic to spread the super glue into the pores. Once the glue is dry I sand it back with 320 paper and finish as usual, I prefer tru-oil. This treatment makes oak and mahogany smooth as glass.

Thanks Frank for the information. If you are using super glue to close the pores of the wood does the tru-oil you use just dry on the surface to be able to give you a smooth finish?  I figured if it was an oil it would just evaporate over time. 

About 8 to 10 hand rubbed coats of thu-oil will give you a semi gloss look and a silky smooth hard feel when fully cured a week or two after last coat. Thu-oil does not evaporate over time but the finish will dull a bit over time and use. A good hand rub with a soft clothe will restore the luster and of course you can can always add another thin coat anytime in the future.

Thanks sparky. Do you also use super glue or do you just use several coats of Tru-Oil as you described above?

https://www.woodmagazine.com/woodworking-tips/techniques/finishing/...

Personally, I use 2-3 coats of wipe-on poly and I don't bother grain filling. 

I'm a fan of Howard Feed-N-Wax.

I used several coats of Watco Danish Oil for a maple neck and oak fret board. No grain filling. Feels more like raw wood, but has some protection.

Another vote for Tru-Oil . . . but I've never needed to fill either. For a fretboard, six or seven coats is more than enough

While I don't disagree with any of the methods mentioned I think some of you would change your mind if you tried the super glue trick. It dries so fast and can knock 7 coats of anything down to 1 or none. I showed this method on a peace of mahogany to a old school cabinet maker of 50 years. His response was " I guess an old dog can learn new tricks". Try it, you'll like it....super hard,super fast finish.

I watched a video of a luthier using super glue on a piece of walnut and was amazed how well it looked after just a few coats and also how hard the finish turned out. It looked great.

I've used CA glue on mahogany and walnut guitar bodies and it does make an excellent grain filler; I apply with a razor blade FWIW.  CA glue also works extremely well to drop fill a ding. 

With CBG's though, I'm never looking for a mirror finish or for them to appear 'perfect' in any way.   Nothing like that beautiful professional looking instrument you use for your avatar.   

I haven't tried superglue as a wood filler yet, I'm after more of a natural feel and look as hand rubbing tru-oil into the wood gives you, but I never turn down new ideas.

RSS

The Essential Pages

New to Cigar Box Nation?How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

R.L. Burnside

Started by Mike Seymore in Performances, How to Play, Lessons, Concerts. Last reply by Shane Speal shanespeal.com 4 hours ago. 4 Replies

fret cutting jig

Started by Alan Dillard in Building Secrets, Tips, Advice, Discussion. Last reply by Alan Dillard 5 hours ago. 5 Replies

What's on your workbench?

Started by Paul Craig in Other stuff - off topic, fun stuff, whatever. Last reply by Cause the Blue rat 10 hours ago. 733 Replies

Oak Fret Board Finish?

Started by Frank Scott in Building Secrets, Tips, Advice, Discussion. Last reply by Blind Doughboy 23 hours ago. 19 Replies

VIDEO & PHOTOS: Naughty Cigar Box Guitar Has "Peep Show" Window!

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Stuart Joseph yesterday. 1 Reply

Bedpan pickups

Started by Robert Bryan in Building Secrets, Tips, Advice, Discussion. Last reply by Paul Craig yesterday. 5 Replies

Blog Posts

CBG project

Posted by Philip Hopper on October 13, 2018 at 3:45pm 3 Comments

Introduction

Posted by Freddie Cisneros on October 13, 2018 at 2:24pm 2 Comments

My Foray Into the World of CBGs

Posted by Poorness Studios on October 13, 2018 at 10:30am 2 Comments

interesting phone call

Posted by Thomas Blasque on October 13, 2018 at 9:22am 0 Comments

what a time it is

Posted by Thomas Blasque on October 13, 2018 at 9:07am 1 Comment

Latest Activity

cbgkent posted a discussion

One string ukulele (the "very diddly bow")

Here's my latest video on one of my latest guitars builds. Loads of fun to play with a little bit…See More
12 minutes ago
Frank Scott replied to Frank Scott's discussion String Gauges -3 string ?
"Hello John,  I would be tuning GDG (basic open G tuning). I would think the heavier gauge set…"
15 minutes ago
cbgkent posted a status
"Ever wondered what a "very diddly bow" sounds like https://www.youtube.com/watch?v=MC7P5xMJ3sY"
16 minutes ago
Uncle John commented on BeetleJuice!'s photo
Thumbnail

Workin' for a livin'

"That is a cool pic.  I know you make great sounding guitars and pickups.  What are those…"
1 hour ago
Uncle John commented on Muddy Creek Guitars's video
Thumbnail

I play with Banjovi & Hawkins (and Anne).

"Pretty cool, John.  Love that song.  Good job, man!"
1 hour ago
Uncle John commented on Danny Gordon's video
Thumbnail

Fire On The Mountain Marshall Tucker Band

"Great looking Hat, Danny.  Good job!"
1 hour ago
ChickenboneJohn replied to Frank Scott's discussion String Gauges -3 string ?
"What gauge you choose depends on what tuning you go for...you can still put a lot of load on a neck…"
1 hour ago
Keith Rearick liked Brian Fink's video
1 hour ago
Keith Rearick liked Dave Lynas's video
1 hour ago
Don Stachovak replied to Frank Scott's discussion String Gauges -3 string ?
"I would try the .017 .026 .036 first. That's the middle 3 from a set of 10's and should…"
1 hour ago
Chris "Fingerz" Zaferes commented on Chris "Fingerz" Zaferes's photo
Thumbnail

"Econo" Line MC-1

"Thank you, UJ!"
1 hour ago
Keith Rearick liked tontonsb's video
1 hour ago

Music

Loading…

© 2018   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service