Hi, I'm really new at this but love the idea. 

Anyway I've watched a ton of videos and I wonder why the fret board is always, it seems, a separate piece of would glued to the neck?

If the neck is hardwood and the fret board is hard wood why the layers? or is it just aesthetics?

Views: 323

Reply to This

Replies to This Discussion

Welcome David, there are a number of reasons why builders choose a different hardwood fingerboard.

1) it covers a trussrod if fitted from the top face of the neck

2) it adds a bit more stability, especially if grain is oriented correctly.

3) not all neckwoods have a grain or cell structure that will grip the fret tang into its slot firm enough, fingerboard material is selected with this in mind.

4) it adds a decorative feature.

5) allows for better break angle of the string at the peghead...and

6) allows fretting to extend past the body if fingerboard goes over the body, at the heal.

7) some people can here a difference in tone when different fingerboards are used......

cheers Taff

Thanks. That all makes sense. I just never heard the "why" in any of the videos.

So as to grain orientation, should they run parallel or perpendicular to each other?

Hi, l always aim for 1/4 saw timber for the neck and the fingerboard. If you have seen timber bowed or boards "cupped" (not flat) in the hardware store, it is probably slab cut instead of 1/4 cut, grain lines going from face to face when looked at the end grain of the board.
It is a more expensive process to cut a tree this way, but the end result is more stable.


Taffy is correct on ever point he made and for the record, I almost always use a separate fret board for the reasons he notes. However, if you go to a music store or ebay and look at the Fender Stratocaster you'll find that many (most/all) strats install frets directly into the neck (no fret board). So, building with no fret board is possible and done, so the option is open.

Another thing to add about fretting softer woods like Poplar is, don’t get it at any big box store. I would get it at a bonified lumberyard, big box stores sell young, hurry-dried wood, which is usually softer & less dense than the quality stuff you can get from the lumberyard? FYI lots of members usually go with oak, since it’s hard & readily available just about everywhere, another thing that will help is gluing the frets in, this will secure them even more so they won’t come out in the future? To reiterate on what Tom said, yes Fender makes a neck without a fretboard, but they don’t use anything softer than Maple so there’s no chance of fret sprout there? Good luck on your builds, you may want to peruse the Pics section for ideas? 

Just ran across this. I usually make my necks from red oak and rarely use a separate fingerboard. I have never had problems with frets seating and holding. I have tried to put frets into poplar and have trouble every time. If I were using softer necks then I would use a hardwood fingerboard.

Yea, Poplar with Oak Fretboard or all Oak Neck is a great & economical choice, just because it’s easy as pie to source & it’s still reasonable on the wallet? 

" I have tried to put frets into poplar and have trouble every time. If I were using softer necks then I would use a hardwood fingerboard."

Makes me question the use of yardsticks (way cool) as a fretboard.

Hi Carl, that's interesting that you have trouble every time you fret into Poplar, what is the trouble faced. I have never used Poplar for anything so I can't comment on how it works and so on, but I was surprised to find it's classed as a hardwood. But then so is Mahogany.

It would be interesting to know the difficulties faced.

cheers Taff

Actually, I was quoting Ron above, Taff.

I agree that it is better to fret into harder woods.  Yardsticks seem to be from softer woods.  I think they look cool. but not sure it is such a good idea without using superglue.

Oops, sorry.



The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Licence plates

Started by Michael Myers in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd on Friday. 15 Replies

Completed Builds

Started by ThePracticalPeasant in Building Secrets, Tips, Advice, Discussion. Last reply by ThePracticalPeasant Oct 20. 5 Replies


Started by Mitchell Cutsinger in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Sep 29. 5 Replies

Blog Posts

Leonard Cohen Life

Posted by Keith Rearick on October 7, 2021 at 11:18am 0 Comments

CBGer’s Lament

Posted by Ghostbuttons on October 3, 2021 at 12:11am 0 Comments


Posted by Mark E. Martinsen on September 29, 2021 at 8:39pm 3 Comments

Prototyping with a big ol' wine box

Posted by Ben on September 23, 2021 at 4:00pm 0 Comments

Mr. Bells

Posted by Stephen Cohen on September 4, 2021 at 12:30pm 0 Comments

Latest Activity

AGP # posted photos
25 seconds ago
the anonymous pick commented on 3 String Blues's photo

who can relate???

"I'm with the  "Don't change them one bit." camp.  for many reasons…"
1 hour ago
the anonymous pick commented on Cigar Box Nation's video

Junkyard Drums, Baritone Guitars & Pipe Organ Amps

"The pipe amp on the bar stool made me think it was a"spinner"  , like a Leslie…"
3 hours ago
Chuck Hunsinger commented on 3 String Blues's photo

who can relate???

"That's funny! And yes I can relate."
5 hours ago
Doug Thorsvik commented on Uncle John's photo
5 hours ago
Doug Thorsvik commented on Uncle John's photo

New CBB. 5 string banjo

"Lookin’ good Uncle John! You are getting the maximum mileage out your fret purchases.…"
5 hours ago
the anonymous pick posted a photo

smokable swamp witch guitar

Yup , you can actually smoke this one . faux volume knob is a cover FOR THE COB PIPE , . mouthpiece…
6 hours ago
Chuck Hunsinger posted a photo


My first attempt at a bottle neck slide
6 hours ago
Chuck Hunsinger commented on 3 String Blues's video

Home on the Range - Acoustic Box Guitar

"Wow! Very nice, very tastefully done. I love the way you play, thanks for sharing that!"
6 hours ago
Doug Thorsvik commented on Poorness Studios's video

Adding an External Speaker Jack to the Orange Crush 12 (or any guitar combo amp)

"I am getting close to being motivated to do something with my Danelectro HoneyTone amp. I already…"
9 hours ago
Charred added a discussion to the group How to Play a Cigar Box Guitar

Mindbender (by Stiltwater)

Can Mindbender, by the band Stillwater, be done on a three-string fretless guitar?…See More
9 hours ago
Doug Thorsvik commented on Uncle John's video

Execution Day

"You nailed the setting Uncle John! I could easily place you at Airway Heights Corrections Center…"
9 hours ago


© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->