Necks - Cigar Box Nation2024-03-29T10:10:23Zhttps://www.cigarboxnation.com/forum/topics/necks-6?commentId=2592684%3AComment%3A3436577&feed=yes&xn_auth=noI'll have to look into it, on…tag:www.cigarboxnation.com,2020-01-25:2592684:Comment:34378952020-01-25T16:55:13.497ZSouthpawhttps://www.cigarboxnation.com/profile/HeathCurtis
<p>I'll have to look into it, only had a quick look at something basic to see if it could be done.</p>
<p>I'll have to look into it, only had a quick look at something basic to see if it could be done.</p> Southpaw, there are lots of s…tag:www.cigarboxnation.com,2020-01-25:2592684:Comment:34378912020-01-25T15:52:40.715Zrobert joneshttps://www.cigarboxnation.com/profile/robertjones
<p>Southpaw, there are lots of scary carving wheel options for angle grinders available with SAE or metric arbors.</p>
<p>google "carving wheels for angle grinder" and watch some of the videos</p>
<p>I have a chainsaw wheel for roughing out dough bowls. If you get a wheel for the grinder my one bit of advice is: Do not slip.</p>
<p>Southpaw, there are lots of scary carving wheel options for angle grinders available with SAE or metric arbors.</p>
<p>google "carving wheels for angle grinder" and watch some of the videos</p>
<p>I have a chainsaw wheel for roughing out dough bowls. If you get a wheel for the grinder my one bit of advice is: Do not slip.</p> i'm thinking if using the bun…tag:www.cigarboxnation.com,2020-01-25:2592684:Comment:34376992020-01-25T13:53:17.081ZSouthpawhttps://www.cigarboxnation.com/profile/HeathCurtis
<p>i'm thinking if using the bunnings oak with a mahogany stain. tempted to try their merbau and work around or disguise the fingerjoins.</p>
<p>i don't have a router, so i'll be doing something by hand unless i can use a wheel on my amgle grinder</p>
<p>i'm thinking if using the bunnings oak with a mahogany stain. tempted to try their merbau and work around or disguise the fingerjoins.</p>
<p>i don't have a router, so i'll be doing something by hand unless i can use a wheel on my amgle grinder</p> Yes Tim, if it's not on the 1…tag:www.cigarboxnation.com,2020-01-25:2592684:Comment:34375842020-01-25T13:37:32.911ZTaffy Evanshttps://www.cigarboxnation.com/profile/TaffyEvans
<p>Yes Tim, if it's not on the 1/4 like that stuff it's often not dead straight. A bent neck before I start. Because I don't use though necks I can get two necks out of a length.</p>
<p>Taff</p>
<p>Yes Tim, if it's not on the 1/4 like that stuff it's often not dead straight. A bent neck before I start. Because I don't use though necks I can get two necks out of a length.</p>
<p>Taff</p> Bunnings Tassie Oak Taff? lol
tag:www.cigarboxnation.com,2020-01-25:2592684:Comment:34376022020-01-25T12:46:04.657ZTimothy Hunterhttps://www.cigarboxnation.com/profile/TimothyHunter
<p>Bunnings Tassie Oak Taff? lol</p>
<p></p>
<p>Bunnings Tassie Oak Taff? lol</p>
<p></p> My Home depot has good stock…tag:www.cigarboxnation.com,2020-01-25:2592684:Comment:34372832020-01-25T03:08:43.421ZJames Poboghttps://www.cigarboxnation.com/profile/JamesPobog
<p>My Home depot has good stock of hobby wood. The oak 2x2 I got for the 2 string bass has awesome grain. The walnut fretboards have some nice figure sometimes. Varathane Ipswich Pine stain on oak and walnut. Is pretty damn cool looking. The oak goes golden and the walnut goes nice and warm.</p>
<p>My Home depot has good stock of hobby wood. The oak 2x2 I got for the 2 string bass has awesome grain. The walnut fretboards have some nice figure sometimes. Varathane Ipswich Pine stain on oak and walnut. Is pretty damn cool looking. The oak goes golden and the walnut goes nice and warm.</p> I have a router table that I …tag:www.cigarboxnation.com,2020-01-25:2592684:Comment:34372812020-01-25T02:58:52.643ZJames Poboghttps://www.cigarboxnation.com/profile/JamesPobog
<p>I have a router table that I haven't set up yet, but will soon. Agree with grain direction.</p>
<p>I have a router table that I haven't set up yet, but will soon. Agree with grain direction.</p> Hi James, my necks are 1" , 2…tag:www.cigarboxnation.com,2020-01-25:2592684:Comment:34372722020-01-25T00:44:38.185ZTaffy Evanshttps://www.cigarboxnation.com/profile/TaffyEvans
<p>Hi James, my necks are 1" , 25mm, overall including the hardwood fingerboard.</p>
<p>I select my timber with grain oriented as in the photo, for stability. I use a 1/2" round over bit with bearing. I prefer to move the material rather than the router so I clamp the trimmer as shown in the photo. If doing a larger round over I would suggest taking smaller bites at a time so as to minimise any tearout. </p>
<p>This method works well if you have a peghead that kicks back or a heal on the…</p>
<p>Hi James, my necks are 1" , 25mm, overall including the hardwood fingerboard.</p>
<p>I select my timber with grain oriented as in the photo, for stability. I use a 1/2" round over bit with bearing. I prefer to move the material rather than the router so I clamp the trimmer as shown in the photo. If doing a larger round over I would suggest taking smaller bites at a time so as to minimise any tearout. </p>
<p>This method works well if you have a peghead that kicks back or a heal on the neck.</p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/3675126375?profile=original" target="_blank" rel="noopener"><img class="align-center" src="https://storage.ning.com/topology/rest/1.0/file/get/3675126375?profile=RESIZE_710x"/></a> <a href="https://storage.ning.com/topology/rest/1.0/file/get/306671307?profile=original" target="_blank" rel="noopener"><img class="align-center" src="https://storage.ning.com/topology/rest/1.0/file/get/306671307?profile=RESIZE_710x"/></a> <a href="https://storage.ning.com/topology/rest/1.0/file/get/306671095?profile=original" target="_blank" rel="noopener"><img class="align-center" src="https://storage.ning.com/topology/rest/1.0/file/get/306671095?profile=RESIZE_710x"/></a> <a href="https://storage.ning.com/topology/rest/1.0/file/get/306672373?profile=original" target="_blank" rel="noopener"><img class="align-center" src="https://storage.ning.com/topology/rest/1.0/file/get/306672373?profile=RESIZE_710x"/></a> Taff</p> I have a Ryobi router that I…tag:www.cigarboxnation.com,2020-01-24:2592684:Comment:34372492020-01-24T16:31:29.293ZJames Poboghttps://www.cigarboxnation.com/profile/JamesPobog
<p>I have a Ryobi router that I use, and a router table that I have yet to set up. Last build I used it but that neck is still a little thick (1 inch with 1/4" fretboard). That one was a 1" diameter roundover, and I just ordered a 1.5" .</p>
<p>I have a Ryobi router that I use, and a router table that I have yet to set up. Last build I used it but that neck is still a little thick (1 inch with 1/4" fretboard). That one was a 1" diameter roundover, and I just ordered a 1.5" .</p> I have used a Harbor Freight…tag:www.cigarboxnation.com,2020-01-24:2592684:Comment:34372012020-01-24T06:15:59.538ZErnest Gusellahttps://www.cigarboxnation.com/profile/ErnestGusella
<p>I have used a Harbor Freight hand held router with a 1/2" round over bit since day one several years and 65 guitars ago.. Takes a while to get a handle on it but works like a charm. You have to move in the right direction though i.e. from where the neck attaches to the body up to the headstock and then back the other side from the headstock to the body. Of course all of this is done before the neck is attached to the body. You have to figure out now to avoid nasty gouges from a bit that is…</p>
<p>I have used a Harbor Freight hand held router with a 1/2" round over bit since day one several years and 65 guitars ago.. Takes a while to get a handle on it but works like a charm. You have to move in the right direction though i.e. from where the neck attaches to the body up to the headstock and then back the other side from the headstock to the body. Of course all of this is done before the neck is attached to the body. You have to figure out now to avoid nasty gouges from a bit that is REALLY spinning and shreds so much wood off you think you are a woodchuck or maybe a beaver or even a woodpecker! You have to do some finishing with a file at the neck and the body. You also have to learn to set the bit at the proper depth so that the roundoff of the back of the neck is more or less perfect. I also ALWAYS glue a fretboard on the neck for extra strength. So far no complaints from customers. Good luck!</p>