I need to add about 1/16" to the thickness of my planed neck to accommodate tuners correctly.

Right now 1/2" need 9/16".

Neck is maple, thinking about gluing about 2-3 sheets of the micro thin dark cedar wood lining in my Padron box. Great medium color, but not sure how it would take to gluing, sanding and clear coat.

Any thoughts or any similar challenges?

Thanks

Views: 330

Reply to This

Replies to This Discussion

Yes, you are right to layer thin wood to the headstock to accommodate the tuners.  A layer of 1/16 inch thick veneer on the headstock gives a nice look. I have seen some not even color coordinated and it looks really good. 

If 1/16 is all you need, I'd go for the headstock veneer.

Try on scrap.

Taff

Similar problem on my bass... I just used thicker washers.

Shouldn’t have any problems at all if both are surfaces are level/flat, just glue & clamp evenly? 

Hi Brent, just be mindefull that the glue does not bleed through micro thin cedar, thats why I suggested a test run, also there might not be much room for much sanding either before breaking through the glue line. 

Taff

I tried the same thing and the cedar wrinkled a bit, I think the glue made the sheet swell or something.  If I did it again I would 100% cover the surface while clamping and go easy on the glue.

Hi, when I do this I make the lamination off off the peghead, then glue the overlay in one go.

I always laminate between two thick boards  and also when gluing to the peghead.

See photos:

Taff

What about drilling tuners out? My guess is this micro thin Spanish cedar will want to crack.

Whar about drilling from backside forward and have a block of wood secured to the face?

Hi Brent I take it you haven't got your brad point drills yet, so as you suggest from the back. A brad point drill is made for wood drilling and scores a line through the wood fibres prior to actual drilling. 

Taff

I've been here myself. I used a washer under the tuner washer and threaded ferrule to make the height. This works for enclosed-style tuners. Worked well for me.
^What Grandpa says! ^^^^^^^

It depends on a few things as to whether a washer will do the job or a veneer is required.

How many strings? Bass or Guitar? What type of wood are you using for the neck?

Maple is strong and a washer would probably be fine for a 3 or 4 string git. 5 or 6 string git or a Bass with more than 2 strings, I would go with the veneer for added strength.

I made a 4 string git once with a Pine neck and even though the neck had a separate fretboad glued on and a trussrod, the headstock started to ramp under string pressure. So I had to add a Oak veneer to stop the ramping. Maple is generally much harder than Pine, but some Maple is soft and can warp easily.

So you can try the washers and hope it works out or try adding the veneer and be sure.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor


Recommended Links & Resources


Forum

Headless Guitar Project - a $100 eBay kit & Gitty pickups

Started by Cigar Box Nation in Feature Articles. Last reply by Poorness Studios on Thursday. 5 Replies

Cigar Box Amp Mods

Started by Cigar Box Nation in Feature Articles. Last reply by RTZGUITARS Sep 17. 14 Replies

Latest Activity

Cigar Box Blues commented on Cigar Box Blues's blog post - Letters from Heaven - Fun Messages from Dave
"Hi John. I’ve been drawing all my life.  Poor eyesight brought drawing to me. I…"
1 hour ago
Cigar Box Blues commented on smilingdog1's photo
Thumbnail

Raffle Winner

"such a great instrument!"
2 hours ago
Cigar Box Blues commented on smilingdog1's photo
Thumbnail

Swamp Witch Guitar

"thats fantastic!"
2 hours ago
the anonymous pick commented on AGP #'s photo
Thumbnail

AGP #442 - ''Neck Stuffup''

"PRETTY SLICK ! "
3 hours ago
the anonymous pick commented on AGP #'s photo
Thumbnail

AGP #442 - ''Neck Stuffup''

"PRETTY SLICK ! "
3 hours ago
the anonymous pick commented on smilingdog1's photo
3 hours ago
the anonymous pick commented on smilingdog1's photo
Thumbnail

Raffle Winner

"Big smiles here too ;l-)"
3 hours ago
the anonymous pick commented on Poorness Studios's video
Thumbnail

Too Much Money (an original song)

"Too Much Money ?  i wish i had that problem  ;-}"
3 hours ago
Cigar Box Blues commented on Cigar Box Blues's blog post - Letters from Heaven - Fun Messages from Dave
5 hours ago
Cigar Box Blues commented on Cigar Box Blues's blog post - Letters from Heaven - Fun Messages from Dave
"Mad Dog 2020"
5 hours ago
smilingdog1 commented on smilingdog1's video
Thumbnail

John Seabuagh and Heather Carter, here at the Hwy61roadhouse 2021 cigar box guitar festival.

"You'd enjoy Hwy61roadhouse these days. The club meets every 3rd Saturday of each month from…"
5 hours ago
Martin Fisher liked Gary O'slide's video
5 hours ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->