R for revolution....

Hey, all you out there,

I'm new here and thought I share with you my view on the cigar box guitar and show you my latest build along the way. I have seen the cigar box guitar in tv and fell in love with it. I loved the history that this instrument folds within him and most important - its sound.

I immediately wanted to build one for my self but because of my poor playing skills, I knew I had no chance of learning the plat 3 or 4 string instruments. So, to make it happen, I knew it had to be a little different. I need it to be standard tuning 6 string guitar, so the neck would be like an electric guitar. Second, I don't really have access to a real cigar box plus, I wanted to make my version of the box, to show some skills.

So I decided to build my own Sapele wooden box with edge miter joint and reinforce with feather-spline. To close the box, I used figured maple. the neck was constructed from 5 pieces lamination of Maple and Saple wood, scraf-joint for the neck angle and butt-joint for the heel. the fingerboard was made from Paduk, which is a beautiful red colored wood, the headstock vennerwas also from Paduk. I used open-gear tunning machine-heads, black screen-cover in the sound-box, flat bridge and one mini Humbucker. Soon I will be starting a new build, this time I will make some build-along post here to share with you guys and galls.


Happy Pass-over

Views: 847

Attachments:

Reply to This

Replies to This Discussion

Viva La Revolution. I like it, I do something similar with Cookie Tins and Bolt on 6 String necks, very nice work.

Great job building this one and I'm sure the Maple, Paduk and Saple makes it sound great too.

Wow!

Welcome to CBN!

That's a very ambitious build. I see from your page that this is build #6. Very nice.

I'd like to try a 6 string someday, but I've sort of been cautioned away from them due to the need for truss rods to strengthen the neck against the added stress of the additional strings, not to mention the inherent weaknesses in most real cigar boxes (unless you beef up the insides of them). Your custom box looks like it has the strength needed in that department. 

Kudos to you!

P.S. - The 3 and 4 stringers are really fun and easy to learn how to play. Check out Justin Johnson or Shane Speal on YouTube. They both have super instructional videos, as well as a lot of other folks, too.  Also, real cigar boxes are available cheap at brick & mortar cigar shops. There are also a number of sources online for them, although you'll pay a lot more for them online. My favorite way to get them, although pricey, is to buy them with the cigars in them. That way I get to smoke 'em and then build with the box. That reminds me, it's time to fire up a La Aroma De Cuba right now!

Cheers! 

Thank you for your kind words.

I actually build electric guitars.
this cigar box electric has been a long time awaiting.
in fact, I'm getting ready to build the second CGBR and I will post a build along to share and show my build.

Regards,
Amir

 

Hi, that's a nice clean looking build. Sounds like your ideas were the same as mine when I started building CBG's some years ago I like to build and play 6 stringers. Well done.

Taff

Hi
I looked at your pic from your profile, its an amazing looking instrument.
It looks like an amplified acoustic guitar?

Sweet box.  One of my friends on here thinks it’s a cheat to use pre-made necks.   Well you made it all, It’s a clean, beautiful build

hi there

this is not a pre-made neck, I actually build it from scratch by laminating 5 pcs. sapele and maple.

Regards,

Amir

 

I know it is great.  I use the premade necks.  I lack some important woodworking tools.  

yup . looks pretty spiffy

Hi Amir if you was referring to the photo of the CBG in the thumbnail photo here, yes it is as you describe.

Its a CBG designed and built to acoustic guitar specs and considerations. It was an experiment to show me how much better a "box" guitar can sound if the "rules" re acoustics are utilised. 

Yes it does have a pre amp EQ fitted with under saddle piezo pickup, but when used, all sliders are at zero with just the volume up as it does not seem to nead any extra enhansment. 

I use phosphor bronze strings and it's a joy to play and hear. Thanks for the comment Amir.

Oh, and my six string necks are pre made but also pre played. Old and used.

Taff

Nice.

What's the dimensions of the box?

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Truss rods in lap steel?

Started by Henrik Jørgensen in Building Secrets, Tips, Advice, Discussion. Last reply by Henrik Jørgensen 3 hours ago. 2 Replies

Frets and fretboard

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Jerry Jordan yesterday. 9 Replies

Perma grit sandpaper

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner yesterday. 4 Replies

Fret Sides Dressing

Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by Titch the Clown on Friday. 8 Replies

Slide off decals

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Friday. 10 Replies

30.5" scale lay-out help needed please!

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Thursday. 20 Replies

Break angle for bridge

Started by Fantacone Box Works in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Thursday. 28 Replies

Blog Posts

Getting ready for next build

Posted by Sean Murphy on July 17, 2019 at 12:54pm 3 Comments

What wood is this?

Posted by Sean Murphy on July 16, 2019 at 10:48am 7 Comments

apology

Posted by Danny Gordon on July 13, 2019 at 7:30pm 3 Comments

Latest Activity

Hollis Fenn commented on Hollis Fenn's video
Thumbnail

Gatton Two piece license plate box

"I will post part two where I play it electric later. It has two 27mm piezo discs wired parallel…"
8 minutes ago
Hollis Fenn posted a video

Gatton Two piece license plate box

Part one of the Dave Gatton License plate box guitar. This is the acoustic demo. Part two will be the electric demo. http://www.davegatton.com/guitars-for......
11 minutes ago
Gary W aka Rev. Bluejeans commented on Poorness Studios's photo
Thumbnail

A trio of 3 stringers

"Good lookin' bunch-o-gitties!"
1 hour ago
Gary W aka Rev. Bluejeans commented on Beetlejuice!'s photo
1 hour ago
AGP # liked Clint Spotts's photo
1 hour ago
AGP # liked David Bowes's photo
1 hour ago
Tom E liked AGP #'s photo
1 hour ago
Tom E liked Daniel Hulbert's photo
1 hour ago
Tom E liked Rich's photo
1 hour ago
Tom E liked Rich's photo
1 hour ago
Tom E liked Evan Keeling's photo
1 hour ago
Tom E liked Evan Keeling's photo
1 hour ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->