Replies to This Discussion

Permalink Reply by Teddy B. on February 23, 2010 at 11:38am

Here's some Pictures! Enjoy.

Attachments:

• DSC02035.JPG, 2.1 MB
• DSC02036.JPG, 2.1 MB
• DSC02031.JPG, 2.8 MB

• ▶ Reply

Permalink Reply by Teddy B. on February 23, 2010 at 11:57am

Thanks! The same with my guitar.

Rick Martin said:

Same here on the sticky tape method. I bought one of those Ted Crocker piezos, moved it around on the inside of the box while playing the guitar until it sounded right, and taped it in. It works great, picks up every little sound. You can literally talk into my guitar and it hear it on the amp, and even the tap the box itself as a sort of drum.

Nice raw Delta Blues build, Teddy, built in the spirit of the music, fretless and all. Sounds great, dude.


Teddy B. said:

I just sticky taped the pizo in. I know the guides on the internet says to use one without electronics but I couldn't tell whether there were any in it anyway. So this is a pizo with a circuit board. I don't know if that affects anything as I don't know what it's for. I did take the element out though. (out of the casing that is)

Jon Pruett said:

My first build used this same box, but I'm getting a lot more neck and body noise with my piezo. I used a little pool of hot glue to mount it, and covered the back in hot glue as well. What mounting method did you use? Thanks,

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page