Replies to This Discussion

Permalink Reply by Jim Tupper on June 13, 2009 at 4:38pm

Hi Ted..Well thanks to you I found out what it is..I did as you suggested and went to the Marshall site..Posted a pic and questions and got a reply within minutes..Slowpokerhino sent me a page with the pedal info..It has to be hooded to certain Marshall amps to work..So thanks again and you take care..Jim

Ted Crocker said:

Great find Jim. I'm not familiar with it. Does it work? You might try asking the folks over at Marshall Vintage Modern. If you post a pic in the effects section someone is sure to know.

• ▶ Reply

Permalink Reply by Jim Tupper on June 13, 2009 at 4:39pm

Hi Christian..I found out it is a PEDL 00021 that has to be hooked to the certain Marshall amps..Thanks for your reply..Jim

Christian Beshore said:

jcm 900?

• ▶ Reply

Permalink Reply by Roosterman on June 14, 2009 at 12:10am

I have something similair but a lot smaller just for switching from clean to crunchy and for adding reverb - mine came with my old VS65R(?) and its real handy.... hope you can find the amp to match!!

• ▶ Reply

Permalink Reply by Jim Tupper on June 14, 2009 at 2:43am

Hi Ben..Yea I wish I could have gotten the amp it goes to but no luck..This person only had this and an old broken "no-name" electric guitar that I can use for parts..

Randy Rooster (Ben) said:

I have something similair but a lot smaller just for switching from clean to crunchy and for adding reverb - mine came with my old VS65R(?) and its real handy.... hope you can find the amp to match!!

• ▶ Reply

Permalink Reply by Jim Tupper on June 14, 2009 at 2:59am

Hi again Ted..I just read my reply to you and I misspelled a word..I said it has to be "hooded" to certain Marshall amps..LOL..I ment "HOOKED"..I guess you probably figured that one out..TC..Jim

Ted Crocker said:

Great find Jim. I'm not familiar with it. Does it work? You might try asking the folks over at Marshall Vintage Modern. If you post a pic in the effects section someone is sure to know.

• ▶ Reply