Markers on Pre-Fretted Boards - Cigar Box Nation2024-03-28T20:11:59Zhttps://www.cigarboxnation.com/forum/topics/markers-on-pre-fretted-boards?feed=yes&xn_auth=notype in the usual way under t…tag:www.cigarboxnation.com,2021-01-03:2592684:Comment:35898992021-01-03T16:32:11.054ZTimothy Hunterhttps://www.cigarboxnation.com/profile/TimothyHunter
<p>type in the usual way under the "visual mode" tab then when you are ready to post then change to the "HTML Editor" tab then click on the Add reply.. works every time no missed posts...</p>
<p>type in the usual way under the "visual mode" tab then when you are ready to post then change to the "HTML Editor" tab then click on the Add reply.. works every time no missed posts...</p> Uncle Toad,
There is a glitc…tag:www.cigarboxnation.com,2021-01-03:2592684:Comment:35895602021-01-03T01:12:30.059ZSouthern Rayhttps://www.cigarboxnation.com/profile/SouthernRay
<p> Uncle Toad,</p>
<p>There is a glitch in the system. Please use the "HTML Editor" in the upper right of this box for more success.</p>
<p> Uncle Toad,</p>
<p>There is a glitch in the system. Please use the "HTML Editor" in the upper right of this box for more success.</p> tag:www.cigarboxnation.com,2021-01-02:2592684:Comment:35895322021-01-02T20:27:00.228ZUncle Toadhttps://www.cigarboxnation.com/profile/ToddAngus
<p></p>
<p></p> tag:www.cigarboxnation.com,2021-01-02:2592684:Comment:35895292021-01-02T20:26:31.012ZUncle Toadhttps://www.cigarboxnation.com/profile/ToddAngus
<p></p>
<p></p> Thanks for all the suggestion…tag:www.cigarboxnation.com,2020-11-19:2592684:Comment:35761562020-11-19T17:25:52.231ZStan Joneshttps://www.cigarboxnation.com/profile/StanJones
<p>Thanks for all the suggestions folks.</p>
<p>Thanks for all the suggestions folks.</p> I use countersinked woodscrew…tag:www.cigarboxnation.com,2020-11-16:2592684:Comment:35752682020-11-16T11:37:11.044ZJack Bradyhttps://www.cigarboxnation.com/profile/JackBrady
<p>I use countersinked woodscrews. I always do them after the frets are installed.</p>
<p>I use countersinked woodscrews. I always do them after the frets are installed.</p> tag:www.cigarboxnation.com,2020-11-16:2592684:Comment:35754992020-11-16T11:35:44.158ZJack Bradyhttps://www.cigarboxnation.com/profile/JackBrady
<p></p>
<p></p> Stan
Have you thought about d…tag:www.cigarboxnation.com,2020-11-15:2592684:Comment:35754912020-11-15T23:09:15.945ZDavid Boweshttps://www.cigarboxnation.com/profile/DavidBowes
<p>Stan</p>
<p>Have you thought about drilling holes and filling with contrasting wood filler?</p>
<p>I have also used Round Styrene ABS Rods, I push into the hole and then trim flush with a sharp razor blade.</p>
<p>David</p>
<p>Stan</p>
<p>Have you thought about drilling holes and filling with contrasting wood filler?</p>
<p>I have also used Round Styrene ABS Rods, I push into the hole and then trim flush with a sharp razor blade.</p>
<p>David</p> tag:www.cigarboxnation.com,2020-11-15:2592684:Comment:35752582020-11-15T23:08:59.788ZDavid Boweshttps://www.cigarboxnation.com/profile/DavidBowes
<p></p>
<p></p> tag:www.cigarboxnation.com,2020-11-15:2592684:Comment:35753962020-11-15T23:08:54.285ZDavid Boweshttps://www.cigarboxnation.com/profile/DavidBowes
<p></p>
<p></p>