So you hack your radio of choice and become disappointed by the volume level you can get out of your newly hacked radio amp. This might be the reason why:

Preamplifier-Mixer

The circuit in Figure 38 permits mixing two inputs, and is particularly intended for one high impedance, relatively low-level input, and a lower impedance, higher level input. As example, the “Mike” socket can take a crystal microphone input, and will be, of high impedance. This input receives amplification from the FET. The 2N3819 is suitable. Other low-level inputs may of course be employed here if necessary.

The “Radio” socket is suitable for a tuner, or for other medium or lower impedance inputs having a higher signal level. VR1 control the level of the “Mike” input, and VR2 the level of the “Radio” input. This preamplifier-mixer will be found very useful when employed with a main amplifier where adequate gain is already available for full volume output with a radio or similar input, but which has no mixing facility, and possibly rather low gain for small input levels. Construction, power supply and audio circuits can be arranged as described for Figures 36 and 37. There is quite wide latitude in the supply voltage, but the value of R4 can be modified if necessary, if current is drawn from the main amplifier. Circuits of this type are excellent for general usage. Where pick-up, tape or other equalisation circuits are required, er other considerations arise, reference can be made to Handbook No. BP35, Babani Press

So as you can see from the information I pasted here from, ( http://www.portabletubes.co.uk/sitefiles/50FETProjects.pdf ) this page helps us understand what is happening.

Views: 556

Replies to This Discussion

Hey Corbin, I have been experimenting with "slaving" & find it awesome. My favorite amps are tube, and I will use a low powered radio tube amp to boost the larger amps by going directly into their input jacks. So chain is axe, pedals, slaved radio, attenuator, amp/radio. I find a tube preamp/slave has much better tone & dynamics then electronic boards.

yeah I hate to say, but that's the downside of hacking into old radio, sometimes they are weak and sound terrible, what's keeps me going is every so often one sounds AWESOME!

BJ, if you haven't tried the pre-amp method I list above, you owe yourself the experience. I have been doing it for about 6 months & have also had success even without an attenuator to serve as a dummy load, with no damage to any of my amps. Huge gain in volume, breakup & tone. Just make an out signal from one amp to the in signal of the main amp.

BJ, the reason I think they are weak is the mismatch between the guitar and the input to the radio amp. Remember these little radios were never designed to be a guitar amp. So it stands to reason some have close to the right impedance match and some are way off.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Zenith C845

Started by James Pobog. Last reply by James Pobog Nov 22, 2019. 1 Reply

Just got a radio/cassette player--My next move--HELP!!

Started by Andy Busch. Last reply by Tim Pannabecker Aug 25, 2019. 3 Replies

Sweet Norwegian Transistor Radio - any tips?

Started by Elliott Fisher. Last reply by GARY KNIGHT Mar 25, 2018. 4 Replies

Battery valve radios

Started by Bird. Last reply by Bird Nov 22, 2016. 6 Replies

3 tube 8 watter Valco style amp with swamp sound

Started by Doug Christensen. Last reply by Doug Christensen Oct 17, 2016. 66 Replies

hey guys just alittle info please

Started by gregory lazorchak. Last reply by Denis U Jul 23, 2016. 3 Replies

Hitachi Transistor Radio with Tape.

Started by David Wilson. Last reply by GARY KNIGHT Jul 4, 2016. 9 Replies

Mini Amp - Where Do I make Connections? What is missing?

Started by Brian Revels. Last reply by daniel clarke May 13, 2016. 1 Reply

Car radio Amp

Started by Orcabait. Last reply by GARY KNIGHT May 10, 2016. 1 Reply

Question

Started by BILL GRONER. Last reply by Wayne Bigler Apr 9, 2016. 2 Replies

1962 Silvertone Medalist 3217

Started by Monterey. Last reply by Scott aka Farmer Ted Apr 3, 2015. 11 Replies

New jack in an old radio

Started by White Raven. Last reply by Scott aka Farmer Ted Mar 30, 2015. 3 Replies

Suitcase Amp

Started by Gary Ross. Last reply by Gary Ross Jan 26, 2015. 4 Replies

Arvin 8 Transistor AM radio...

Started by Corbin. Last reply by Corbin Jan 16, 2015. 11 Replies

Low volume with your Hacked Radio --- Amp

Started by Corbin. Last reply by Corbin Jan 12, 2015. 4 Replies

DIY amp question

Started by Greg Thompson. Last reply by Greg Thompson Jan 10, 2015. 2 Replies

1964 Philips AM/FM Radio to guitar amp project

Started by Scott aka Farmer Ted. Last reply by Scott aka Farmer Ted Jan 8, 2015. 4 Replies

Thank you beetle juice!

Started by Greg Thompson. Last reply by Jim Quinlan Nov 6, 2014. 5 Replies

Preamps

Started by John Newman. Last reply by Soap Box Blues Aug 21, 2014. 3 Replies

Grundig Yacht Boy Radio

Started by Keith 66. Last reply by Soap Box Blues Aug 2, 2014. 1 Reply

Latest Activity

Uncle John commented on Dave Lynas's video
Thumbnail

Loosing One’s Memory is a Good Thing

"That rooster head is looking good.   On the song's sentiments, sometimes yes and…"
3 seconds ago
Uncle John commented on Dave Lynas's video
Thumbnail

I’ll be there for You

"Good Golly Good.  But my eyes are getting fuzzy."
1 minute ago
Uncle John commented on Randy S. Bretz's video
Thumbnail

Tennis Racket fretless

"Light as a feather and good,good tone.  "
2 minutes ago
Uncle John commented on Allan Zolnekoff's video
Thumbnail

trim.0D81E680-BB61-4381-98B1-7623DB434169

"Real deal GOOD.  Nice play and vocals."
3 minutes ago
Allan Zolnekoff posted a video
16 minutes ago
Dave Lynas posted photos
56 minutes ago
Gus K replied to T-Gripped's discussion Too far gone?? in the group Building a Cigar Box Guitar 101
"You try a bit of this on the…"
58 minutes ago
T-Gripped commented on Dave Lynas's photo
Thumbnail

Abalone Eyes

"Delightful!!   This may well answer that age old question, "What came first...""
1 hour ago
T-Gripped liked Dave Lynas's photo
1 hour ago
Dave Lynas commented on Dave Lynas's photo
Thumbnail

Abalone Eyes

"Thanks Poorness. It’s coming slow."
1 hour ago
hthavana replied to Sean Murphy's discussion Table saw for fretting, blades, and power
"I really like the idea of a dedicated saw for fretting, but I have to admit, a small jig will do…"
1 hour ago
Southpaw replied to T-Gripped's discussion Too far gone?? in the group Building a Cigar Box Guitar 101
"definitely usable, i'm looking at building a motorbike plate cbg with a 6x9in box. …"
1 hour ago

Music

Loading…

© 2020   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->