Is anyone getting their amp kits from AliExpress? There's a ton of listings, I can't see how they sell kits for very little money, so I'm questioning quality.

Views: 226

Reply to This

Replies to This Discussion

There are tons of LM386 PCB's available from China. The ones on AliExpress are available all over the net as well., I bought 10 each from EBay for about $2 each.,then I bought 10 JRC LM386 chips from Mouser to make the .3 watt amp into a 1 watt amp.  As far as quality goes, all 10 amps worked with the chips that came in them.,.,I powered with cast off wall warts from work., the same place i got my speakers.,.,( we huck it all in the trash at work anyway).,.,.,great for a small amp, CBG amp, pre-amp, or as a overdrive/ distortion pedal.,.The big plus is there are plenty of free schematics online, and the PCB's are easy to mod.,.,.so now you have all my secrets.,.,.,

Your secrets are safe with me. Interesting info, thank you. I was having a tough time finding sellers for runoffgroove schematic kits. I guess I see why now, with Chinese sellers offering them for next to nothing.

This is true about the market selling ready-made units so cheap, but not all of the particular effects are made.

I like building my own too. You can easily tweak your own build on a build board or breadboad more so than a ready-made unit because the PCB is made just for that particular version.

The last time I got individual 386 chips of the N1 type they didn't last long and I had to replace mine with the more durable N3 type.

The N1 - N2 - N3 chips are made to handle 9volts to 12 volts DC, but the N4 type is made for higher voltage 12 volt to 18 volt DC.

I also get mine from Mouser or Small Bear when they have them.

Best chips are the Texas Instrument in my mind. But JR (JapanRadio) I think are the designers. If you not gonna buy a Gitty amp Look for one of these. they$ 10 on ebay you can find them $4.



You can find the kits for a little over a dollar, they work ok considering they are a 1/4 watt, but the mods are easy to add as you can swap out the components before soldering.  A good and cheap way to develop some soldering skills too.

Internet data on these 9volt amps have been all over the place on output wattage. Some say 1/4watt, some 1/2 watt and some 1watt. I know that the voltage used can play a part in that, these little amps say to use 9volts and up to 12volts.

My home build Ruby is supposed to be 1/2watt at 9volts and 1watt at 12volts. Hard to tell without the right equipment to check though. I can say that my Ruby amp with it's 6" speaker is loud enough to be heard throughout the house. ;)

All three are right.  I think it is dash 1, 2, and 3 to designate the wattage.  All the really cheap ones I have seen are the lowest output.  Someday I will make a full watt screamer!

If you do make one, use the 386 N3 chip, it's a heavy duty chip. The N1's seem to be too cheap.

The Ruby amp is like the Smokey or Lil'Gem amps, but uses a nice Jfet filter circuit in front of the chip and sounds a lot like a Fender Champ. I added a 2-way switch for the caps to have the regular .047 cap on one side and a .1 cap on the other for Fender Bassman type tones. It doesn't really get Bassman tones, but it is darker.

I found the low watt chips at 9 vdc have the best distortion tones. The one watt chip running at 12 vdc has more clean headroom.

That has been the same outcome for me too.


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


LMM GDG strings.

Started by Bruce Young in Building Secrets, Tips, Advice, Discussion. Last reply by Bruce Young 7 hours ago. 3 Replies

Build puzzle

Started by cbgnewbie in Building Secrets, Tips, Advice, Discussion. Last reply by Paul Craig on Friday. 7 Replies

Playing Slide with a Pocketknife - Mance Lipscomb Captured on Film

Started by Shane Speal in Feature Articles. Last reply by Jeffrey Warren Park on Wednesday. 6 Replies

Video search for specific cbg build!

Started by Will "KOOLDOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOLDOG HOOCH" Bonner Apr 10. 2 Replies

Bridge questions

Started by Will "KOOLDOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by BrianQ. Apr 9. 12 Replies

Fret width / depth

Started by Jeffrey Blessing in Building Secrets, Tips, Advice, Discussion. Last reply by Jerry Jordan Apr 5. 2 Replies

Latest Activity

Christopher G Daniels replied to Holly Hodson's discussion Output method in the group CBG wiring & electronics.
"Hi Holly!  In honor of our sponsor, I'll first suggest a (now) $37 speaker kit from…"
6 minutes ago
Christopher G Daniels joined Andy Stone's group

CBG wiring & electronics.

Want to plug that thing in? Here's a place to share ideas about pickups (Both magnetic and piezo)…See More
6 minutes ago
Dave Lynas liked BeetleJuice!'s photo
12 minutes ago
Dave Lynas liked BeetleJuice!'s video
13 minutes ago
Keith Rearick liked Dave Lynas's video
23 minutes ago
Keith Rearick liked Bill Turner (Wunkyman)'s photo
26 minutes ago
Keith Rearick liked Larry Grant's photo
27 minutes ago
Keith Rearick liked Cpt. Nemoff's photo
28 minutes ago
Keith Rearick liked Cpt. Nemoff's photo
28 minutes ago
Keith Rearick liked Dave Lynas's photo
29 minutes ago
Keith Rearick liked Dave Lynas's photo
30 minutes ago
BeetleJuice! posted a video

- Here is a video with cigar box guitar music -

- He's not here - He's risen! - But since your online, come on by the website there is cigar box guitars for sale and you can get a...
31 minutes ago Knowledgebase Articles



© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->