Replies to This Discussion

Permalink Reply by weinerdog on June 13, 2009 at 4:41am

Dennis - that looks really good. How is the can secured? It looks like it would roll over the towards the bridge(obviously it isnt'). Did you just find a scale print and photoshop it into the design?

• ▶ Reply

Permalink Reply by Dennis Brooker on June 13, 2009 at 4:51am

Weinerdog(?) Thanks for the compliment - The can is secured towards the bottom with 2 srews and the open side is towards the bridge - there is a hole in the backside of the can the string goes through then over the bridge, which has a slight "V" shape to help keep the string centered, over the nut and then on to the tuner - I made my scale in Corel Draw and do most everything in Corel Draw because at one time I was an "Authorized Corel Draw Training Partner" - I printed it out on my Laser Printable wood veneer that I offer for sale (hint, hint, plug, plug) and attached it to the 2x4 - I also added a custom printed wood veneer label to the can to match - that's my "hook" is that I offer that as part of the deal to the customer - they get thier "name" on the custom label on the can when they buy one - DB

• ▶ Reply

Permalink Reply by Daniel Holenstein on June 13, 2009 at 10:03pm

Hy Dennis. Looks good to me. Nice.

• ▶ Reply

Permalink Reply by Dennis Brooker on June 16, 2009 at 9:04am

FYI - I'm also now making a version with cherry veneer - below is a photo showing both versions - I hate to be partial but I kinda like the cherry version a little better - DB

• ▶ Reply