Fat Back Neck
Greetings Nation,
Does anyone know where I can get a fat back neck template? Most internet searches come up with ones that are no longer listed for sale. Thanks in advance!
Jim
Read more…Greetings Nation,
Does anyone know where I can get a fat back neck template? Most internet searches come up with ones that are no longer listed for sale. Thanks in advance!
Jim
Read more…I know its been mentioned before, there are a lot of tricks to gluing on the fretboard, just thought I'd start another one with pictures.
My technique is to use a couple of the ratcheting clamps to squeeze on the sides at each end to keep it in line
Read more…I didn't find right discussion for me.
I have new oak guitar neck with 12" (305 mm) radius maple fingerboard.
frets on neck have never been leveled. Just pressed and glued in slots.
Frets are not big frets that some guitars have. Neck is straight b
Read more…I´m making 28.5 scale 4 or 5 string 16 fret baritone cbg.
Neck is mahogany and ash laminated together.
For the maple fingerboard I measured and marked frets layout.
Next I burned with wood burner frets layouts
Next I measured from nut to bridge 28.5
Read more…I have good cigar box. Bad is that it's in propeller. Can I fix it and how ?
I have guitar fingerboard what is 70cm long. I wanna make 28" scale guitar.
30" scale if I can't calculated 28" and I have short scale bass neck mesures.
My electric guit
Read more…Hay I am planing on building the neck my self but I don't wana fret the fingerboard myself. I found this one pre-fretted fingerboard
http://www.allparts.com/Rosewood-Fretboard-p/lt-1075-0r0.htm
but I didn't find many because i am guessing the wood will
Does anyone have any experience using non-standard wood for fingerboards? For example, I know maple needs to be sealed... rosewood and ebony do not. My problem is when I start getting into woods that aren't "typically" used as fingerboards. Does an
Read more…