So I got the wiring to my new CBG 95% figured out. The kill switch is working, the knob is turning it up and down, but in the middle of turning the volume knob, I get a buzz for a second and then it goes away as I get to each end of the turn. Turn u
Read more…I just had a good lesson on piezo installation from my freind Rob, who is an electronics wiz. I was getting a lot of buzz and hum from the piezo I had installed under the stainless steel cat food dish reso on my latest build. He had a look inside and
Read more…So, I took that new gold humbucker and installed it in my latest build--visions of that lovely silence humbuckers are noted for.
Used a 500k pot and standard mono jack. Soldered the braided wire from the pickup and the negative side of the jack to th
Read more…I used a rod piezo for the first time on my most recent build. I like the reproduced sound of the strings, BUT ...
I get a persistent buzz when it is plugged into an amp. It sounds like it is not grounded. I am not very experienced with electro
Read more…I recently purchased a lovely hand wound pickup, it has 2 leads, I have it wired very simply to the jack. When I touch the jack it pretty much stops. I believe my connections are good(i think) Please pardon my ignorance on this I relize this has been
Read more…Just wired up my guitar.... and I've got buzz. I am having trouble diagnosing it... and it's starting to irritate me. Typical guitar wiring setup, one magnetic pickup, one volume and one tone control. This is the exact same setup I've used on my oth
Read more…