Posted by Buffalo John on October 11, 2009 at 6:08pm
I would like to build a license plate resonator cbg I have built 3 cbg's but don't have a clue what goes under the hood of one of these, any help would be much appreciated. thanks!
You need to be a member of Cigar Box Nation to add comments!
Theres more than one way to skin a cat though - especially in CBG world!
For my license plate resos I construct a simple open topped box same size as the plate, same construction as a normal cbg (ie thru neck notched inside the box part) and screw the plate on top. Straight forward.
True resos are a more complicated beast, but again, there is no right and wrong. You can get right into building soundwells, spinning cones etc etc but its not wholly neccesary
Iv seen some cool mods on plate resos - Peter Martin cut out the inner part of the '0's and ''P's etc on his as soundholes - looked awesome!
Replies
For my license plate resos I construct a simple open topped box same size as the plate, same construction as a normal cbg (ie thru neck notched inside the box part) and screw the plate on top. Straight forward.
True resos are a more complicated beast, but again, there is no right and wrong. You can get right into building soundwells, spinning cones etc etc but its not wholly neccesary
Iv seen some cool mods on plate resos - Peter Martin cut out the inner part of the '0's and ''P's etc on his as soundholes - looked awesome!
Post some pics when you're done!!