Jim Morris took the "Gus Cannon Banjo Challenge" and knocked it outta the park!

A week ago, I posted an excerpt from Samuel Charter's book, Country Blues where he described the very first banjo played by jug band icon, Gus Cannon:

He loved music and wanted to learn how to play the banjo, so he made himself one out of a bread pan that his mother gave him and a guitar neck.  He put the guitar neck through holes in the side of the dough pan, then covered the pan with a raccoon skin, scraped thin.

A lot of country boys made their own banjos this way.  The only unsatisfactory aspect was that there were no elaborate drumhead arrangements, with bolts and screws to keep the skin head tight in damp weather.  Cannon always traveled with his pockets full of crumpled newspaper, and before he was going to play, he would make a fire with the paper and hold the banjo over the heat until the head was tight enough to play.

I then challenged you all to recreate the banjo in order to explore this history even deeper.  (See the article here.)  Cigar Box Nation "power member," Jim Morris of Springfield, WV took that challenge and brought the banjo to life, using the above description along with some other information he had on Gus Cannon. 

Let's start with the finished product:  Here's Morris performing Gus Cannon's "Minglewood Blues" on the banjo.

Notes:  Morris starts out by stretching the banjo head with burning paper, just like Cannon.  He also chose to perform the song as a slide banjo tune, just as Cannon originally played it!

Here's his photos and notes on the build:

"Several other sources state that he made the banjo from either a frying pan or a bedpan with the coon skin stretched on it. Either of those would most likely be round and I'm guessing he told the story, or it got re-told, a little differently each time. Either way I'm curious to see what builds come from this! I'm going with frying pan and skin of undisclosed animal since that's what I have on hand.

"Shane's book says Gus used a bread pan for his first banjo. Other sources say bed pan and Wikipedia says frying pan. This is what I used."

Frying pan for the Gus Cannon banjo
"I cut the handle off with a hacksaw and that gave me an opening for the neck extension."
The Gus Cannon bread/frying pan banjo build
"My original neck idea with the animal skin. It's not raccoon but it was given to me by a friend who's an avid trapper. Suffice to say it's a mammal of some type."
The Gus Cannon bread/frying pan banjo build
"I discarded my original neck idea when I saw in the text that Gus had used a guitar neck."
The Gus Cannon bread/frying pan banjo build
"That's the neck from a Harmony Caribbean. I hope I didn't sacrifice a neck that's worth a ton of money to collectors."
The Gus Cannon bread/frying pan banjo build

I'm not sure what method Gus would've used to attach the skin. I went with self tapping screws.

The Gus Cannon bread/frying pan banjo build
Great job, Jim!  You made a forgotten piece of history come alive again.  That's the magic of these instruments... they're like time machines that can take you back in time.
-shane

Views: 2385

Reply to This

Replies to This Discussion

Thanks for posting all this Shane. Wait, how did I become a "power member"? I don't even know the secret handshake! Anyway, some of the things that get posted are beyond what I can do like winding pickups and which end to hold a soldering iron on but this one fell right into my little narrow niche and all the parts were already leaning in various corners of the shop so it was a real fun thing to do. Probably would never have done it except for this challenge. Hopefully the next challenge will be something like "Reproduce the George Beauchamp Hoseshoe Pickup" which will be happily beyond my ability.

Nice one, Jim,.ma man. But oh dear, that poor wee defenceless Harmony guitar!

Thanks Jamie. It was already a bodyless neck that I salvaged long ago and now it has a new life so morn not for the Harmony.

Aha, my faith in human nature has been restored, Jim ;)

You know I'd never harm a Harmony. That would lead to dischord thruout the Universe!

Cheers, Grasshopper ;)

Awesome!

Thanks Denny.

That is a thing of beauty. Great sound, and playing as well!

TWO thumbs up!

Thanks Blue Frog. this is my favorite build of 2016 so far.

Very cool, Jim. As always.

Thanks Bob, hope to see you in BS sometime.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

How to Get Your Own Music on Spotify

Started by Shane Speal shanespeal.com in Feature Articles 2 hours ago. 0 Replies

Volume/Tone Pots

Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by Paul Craig 22 hours ago. 8 Replies

Fretwoods

Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by Jerry Jordan 22 hours ago. 2 Replies

s/s lm386 draw amp,

Started by GARAGE HERMIT in Building Secrets, Tips, Advice, Discussion. Last reply by GARAGE HERMIT yesterday. 9 Replies

Nut milling

Started by Lothar Ahnert in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans yesterday. 3 Replies

Latest Activity

Jim Codog replied to Jim Codog's discussion Magnetic Pickups - What's good in the group Building a Cigar Box Guitar 101
"Thanks for the info.  Jim"
1 minute ago
3 String Guitars posted photos
11 minutes ago
Tim Pannabecker replied to Jim Codog's discussion Magnetic Pickups - What's good in the group Building a Cigar Box Guitar 101
"with piezos I always use a pre amp.  There are harnesses for mag/peizo setups. I line my box…"
37 minutes ago
BrianQ. liked Dave Lynas's photo
1 hour ago
Dave Lynas posted a photo

knobs for Vern

Box of sample knobs for Vern Hallett. I’ll post tomorrow.
1 hour ago
Shane Speal shanespeal.com posted discussions
2 hours ago
Tom T replied to Robbie's discussion bad interference or hum
"Doesn't the WickedBucker have four screws to mount and hold the cover in place? Regardless,…"
2 hours ago
Dave Lynas liked AGP #'s video
3 hours ago
Dave Lynas commented on AGP #'s video
Thumbnail

''Your Cheatin' Heart''

"Very clean and clear AGP. I only had sound in one ear phone though. Did you record mono?"
3 hours ago
Robbie replied to Robbie's discussion bad interference or hum
"I understand, Just didn't want to have to tear it apart again to find a problem. But yes, I am…"
3 hours ago
Dave Lynas commented on Dave Lynas's video
Thumbnail

Frankie & Johnny

":@0  Unc"
3 hours ago
Denny liked Ville Vornanen's video
4 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->