Looking  for ideas on supporting a nut from the back side on a scarf joint other than grooving out a notch for the nut to fit into.

Seems I saw a pic of a build once where their was some support behind the nut on the tuner side so it was supported from the front on the fretboard end and back

Thanks

Views: 259

Reply to This

Replies to This Discussion

I saw one someplace( sorry looked at so many videos and pictures) where the bone or ivory nut had  2-3 countersunk screws into the fretboard from the tuner side. Also saw some where the head had a piece of wood laminated and shaped like the head. The nut was resting between that and the fretboard. Hope that helps. BTW that's what I'm doing on my build.

I found the picture for the nut between the fretboard and head veneer. This is from "ADVANCED CIGAR BOX GUITAR BUILDING GUIDE" a free download. I know this is probably late, but for future reference.

Attachments:

I found the picture for the nut between the fretboard and head veneer. This is from "ADVANCED CIGAR BOX GUITAR CONSTRUCTION GUIDE" a free download.

I've been using a bolt/screw for a nut on my CBG's for awhile now. I use a half-round file to make a groove for the screw. I usually add a drop of super glue so it doesn't fall off when changing strings.

Gluing or screwing a piece of wood in front of the nut is a good idea and usually looks better.

Hi,

My name is Jerry and I'm a nut. Self-supporting, but I have been on the dole too, as well...yeah it seems a bit of wood behind the nut, clamped n glued would do the trick...I personally like a big zero fret unless I'm going for higher action at the nut.,.,,.best wishes on those new builds......

I’m not sure, but are you describing the support in my pic?  If so it is a CB Gitty product.  By the way, this is more of a string placement, because the “nut” is a fret, a zero fret.  

That's very similar to the one I was describing, but it was bone or plastic and the screws were countersunk.

They have those at guitar fetish if you’re not feeling adventurous?

https://www.guitarfetish.com/Floyd-Rose-Headstock-String-Retainer-B...

Hi Brent, lots of good ideas here. Most of the time I just glue my bone or ebony nuts up against the end of the fingerboard and the surface of the peghead. Never had an issue, may not work in every situation but when I do use it, it works fine.

Taff

Agreed

Yup . . . that almost always works. No need to reinvent the wheel on this.

I generally use a zero fret, but glue a bone or plastic nut against the end of the fingerboard for use as a string guide.

Prior to the gluing, test fit the nut both for width and string spacing. Then, file the string slots deep enough that they're right at fingerboard level. A couple drops of super glue and you're good to go.

It's quick, simple, and effective.

As a side question, can you use a fretted bridge as a nut????

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Nut and #1 fret spacing.

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner 9 hours ago. 2 Replies

Zero fret/nut idea

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner 21 hours ago. 8 Replies

Rescued ss can.

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Saturday. 15 Replies

Looking for Builders and Players in Florida!

Started by Will "KOOL DOG HOOCH" Bonner in Fests and Concerts: Organizing and Promoting. Last reply by Will "KOOL DOG HOOCH" Bonner on Thursday. 15 Replies

Fun with a 2x4 Bass - Build Your Own

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Mike Parker on Thursday. 24 Replies

Secret codes?

Started by Will "KOOL DOG HOOCH" Bonner in Performances, How to Play, Lessons, Concerts. Last reply by Will "KOOL DOG HOOCH" Bonner Jun 17. 21 Replies

Latest Activity

Bob "Ambrose" Negus liked Dave Lynas's photo
3 minutes ago
Bob "Ambrose" Negus liked Dave Lynas's photo
3 minutes ago
Bob "Ambrose" Negus commented on Dave Lynas's photo
Thumbnail

Pride of Cuba vintage box Cello

"A very neat box Dave.  Love the lettering... classic!"
3 minutes ago
Bob "Ambrose" Negus liked Uncle John's video
6 minutes ago
Bob "Ambrose" Negus commented on Uncle John's video
Thumbnail

See That My Grave Is Kept Clean ~ By Blind Lemon Jefferson 1927

"That was great Uncle J!  You captured the essence of this lamentable melody!"
6 minutes ago
Bob "Ambrose" Negus liked Andries D. EKER's video
15 minutes ago
Bob "Ambrose" Negus commented on Andries D. EKER's video
Thumbnail

Don't Fence me in (Trad) C. Porter - A. D. Eker 2019

"That was an excellent upbeat rendition Andries.  Brilliant!"
15 minutes ago
Don Craig liked Poorness Studios's photo
16 minutes ago
Don Craig liked Randy S. Bretz's photo
17 minutes ago
Don Craig liked Tony Pistilli's photo
17 minutes ago
Andries D. EKER left a comment for Bob "Ambrose" Negus
"Hi there Bob !i finaly got  a track on the playlist on my page here on the Nation its number 1…"
21 minutes ago
Andries D. EKER left a comment for Bob "Ambrose" Negus
"Hi there Bob i can not seem to get any new music in my own page music box it keeps saying error !…"
21 minutes ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->