Does anyone here make their own glass slides?  I've made one successfully that I'm willing to stuff my finger into.  It ended up with one tiny crack that doesn't seem to come all the way to the outside.  I use a handheld glass cutter to score the bottle, warm it up with a small propane torch, then douse it in a cup of cold water.  If it looks ok I sand it on the concrete floor in the cellar (seems to work better than sandpaper).  The first one I made cracked a lot and pieces fell apart from it.

I'm finding that the thicker the glass, the tougher it is to cut it clean.  Also I think I'm heating a little too long, more than necessary.  A glass cutter specifically for bottle necks would probably help make the score more even as well.

Views: 156

Attachments:

Reply to This

Replies to This Discussion

Yes I make them I use a Saw all blade in my banjo saw Thame me about 6 minutes a slide I’ve a video up on my page of how I do it here’s a pic of my Bare Bones Barfighter Slides . 

Attachments:

I like that name Bones :)

Thanks Brian they come in handy at the saloon ... 

Cool.  Curious, dou use them w the cork in them?

The cork is only to hold my toe tag .... just pull it out Cobba . 

Done it a couple times with mixed results.  Last time I collected about 10 bottles, scored them all, then dipped them in near boiling water followed with ice water.  A few broke very clean, a few had chips or cracks, and a couple didn't come apart even trying multiple times.  There is probably 500 ways to do it on the interwebs but as this was free and easy having half of them work out is fine for me.  Just need to drink more wine!  Once at a party store the clerk asked if I needed help selecting a wine - I wanted to say it should be decent tasting, cheap and have a long straight neck.

nice slide dude, keep at it. I personally like them and each one seems to sound different depending on the type and thickness of the glass. I give them away when I sell or give a guitar.

Yes, I use the G2 glass cutter. This works best for me thus far. I have found that there is such a thing as too hot and too cold when going back and forth. What worked best for me to use a candle to heat the score and cold water back and forth. Less longitudinal cracks and chips this way, but takes more time.

Glass cutter, Candle, Ice water 

Steel carbide rod saw 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Fretwoods

Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by Southpaw 13 hours ago. 4 Replies

Pickup Depth

Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans 14 hours ago. 1 Reply

How to Get Your Own Music on Spotify

Started by Shane Speal shanespeal.com in Feature Articles on Thursday. 0 Replies

Volume/Tone Pots

Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by Paul Craig on Wednesday. 8 Replies

s/s lm386 draw amp,

Started by GARAGE HERMIT in Building Secrets, Tips, Advice, Discussion. Last reply by GARAGE HERMIT on Wednesday. 9 Replies

Nut milling

Started by Lothar Ahnert in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans on Wednesday. 3 Replies

Latest Activity

Keith Rearick liked Rough Cut Tom's video
2 minutes ago
Keith Rearick liked Jeff 'Bones' Reilly's photo
3 minutes ago
Keith Rearick liked Jerry Jordan's photo
4 minutes ago
Daniel Walter commented on Randy S. Bretz's photo
Thumbnail

Added peghead weight for sustain

"nice wood ! what is it? looks like walnut, never have seen that much figuring."
5 minutes ago
Daniel Walter commented on Dave Lynas's video
Thumbnail

The Goat goes Electric

"catchy tune Dave ! who needs a volume pot? cuts into the pureness of the pickup. as long as you can…"
10 minutes ago
Rough Cut Tom commented on Rough Cut Tom's video
Thumbnail

The Dulci-matic by Rough Cut Guitars

"Thanks Guys! This one got a little scary since I thinned the paperboard top down to 2mm (and a…"
3 hours ago
Doug Krantz liked Rough Cut Tom's video
3 hours ago
Doug Krantz liked Gary O'slide's video
3 hours ago
Tom E liked Poorness Studios's video
4 hours ago
Tom E commented on Tom E's video
Thumbnail

Blackbird

"Thanks guys!"
4 hours ago
Rich commented on Rich's photo
Thumbnail

RTL CBG 2 string Cats

"Thanks, guys. A real compliment coming from an artist like you, Dave."
5 hours ago
John Mark Perchalski liked Muddy Creek Guitars's video
5 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->