I’m planning on making my first glue on fretboard. My question is on how to add the nut. One video I saw showed the builder notching the fretboard then using a bolt set in the notch. I’m using the glued on board as a way to lower the string height. Seems to me my bolt nut should rest on the neck. In that case do I need to cut a notch for the nut or will the end of the fretboard hold it in place enough. Trying to make my builds more fretting friendly for the new player.

Views: 66

Reply to This

Replies to This Discussion

Hi Michael, I'll give you some tips from my experiences. 

Use a 1/4" fingerboard that sits at a level where the bottom of the fingerboard is on top of, or level with, the top of the box. I find that with the height of the fret and height of the strings over the frets, give me a decent bridge height.

I put the bolt off the end of the fretboard sitting in a groove in the neck portion of the peghead, and then glue it in place. If you do not do this you may find the bolt may roll back as strings are tightend.

if you put the bolt on top of the fingerboard (smaller bolt) it will allow more break angle if neaded.

Keep in mind that the scale length will start from the centre of the bolt, were the string leaves the nut, so the amount of bolt in front of that point should be removed from the fretboard at the nut end.

hope this helps Taff

Thanks Taff. That helps. Do you have a standard size of bolt you use? I know the break angle at the bridge should be around 15 deg. but I don’t know what the angle should be at the nut.

Hi, I don't think the angle in numbers is important as much as having a good feel of string tension, and enough downward pressure at the nut to prevent buzzing and enough over the bridge for good "loading" down pressure on the top or undersaddle piezo.

Having said that the peg head angle for my guitars is 15deg for solid peghead and possibly 12deg for slotted peghead.

The size of bolt for a nut I would suggest is the one that gives you the best action height over the first fret, depending on the mounting point you choose.

i used to draw a side elevation of my early builds so as to plot ahead of time the heights, positioning and angles that may be involved in the build. They are all straight lines on a sheet of poster board. 

Taff

Thanks again Taff. You continue to help and educate me. Much appreciated.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Nut and #1 fret spacing.

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner 10 hours ago. 2 Replies

Zero fret/nut idea

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner 22 hours ago. 8 Replies

Rescued ss can.

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Saturday. 15 Replies

Looking for Builders and Players in Florida!

Started by Will "KOOL DOG HOOCH" Bonner in Fests and Concerts: Organizing and Promoting. Last reply by Will "KOOL DOG HOOCH" Bonner on Thursday. 15 Replies

Fun with a 2x4 Bass - Build Your Own

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Mike Parker on Thursday. 24 Replies

Secret codes?

Started by Will "KOOL DOG HOOCH" Bonner in Performances, How to Play, Lessons, Concerts. Last reply by Will "KOOL DOG HOOCH" Bonner Jun 17. 21 Replies

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->