Hello,

I just realized that the fretboard that I built was straight, and the frets I bought were curved.

When installing them, I cut the slot a bit deeper than needed and hammered them in place (classy...), which does barely the trick.

Do you go for a fretboard with a radius + curved frets ? Or flat fretboard and frets ? Or a mix of both (then I missed something on the installation :-) )

I read that with curved frets, it's easier to bar chords for folk guitars, but I'm not sure with a cigar box guitar with 3 strings and a narrow neck it's required.

WDYT ?

Thanks !

Ben

Views: 93

Reply to This

Replies to This Discussion

Hi, Ben.  I saw your pics and the guitar looked pretty good.   It's usually best to start simple and work up.  You started kind of complicated with a scarfed neck and frets.   I have built a lot of cbgs and maybe 20 or more with frets.  I get frets from CB Gitty right here on this site.   I use medium/medium and they work well for me.  I think they are flat frets.  I think 95% of use flat frets.  

Gitty sells a DVD fretting instructional.  I have not actually watched it.  I cut my frets with a nipper and 'dress' the ends with a stationary belt sander.  Not proper, but it works for me.    And I put a piece of scarp wood over the frets and hammer them in.  

Someone with better skills than me probably has a how-to fret video on youtube.

Hi Ben 

,you are. Correct a radiused fingerboard aids fingering on a wide fingerboard. I think three stringers don't need it. Neck is not tapered wider at one end.

i always overradius my frets, or slight radius on flat boards. Assuming you slot is the correct width and grips the tang, as the radiused fret is tapped in it flattens out and the barbs in the tang move slightly left an right as well as down. This creates a better grip at the ends.

Taff

Hm ok I'll go first with simple flat fretboard and flat frets first. I purchased online a fret saw because it's too sloppy using my regular saw and some glue to compensate the wider slots.

Note for Uncle, I started without frets and had a lot of fun with the slide, but I was greedy and wanted to try out everything directly, I'm currently riding the beginner enthusiasm wave :-)

Haha, it's gonna be a long wave, I'm still learning after 50 years building and repairing. I think one has to be like a sponge soak up as much info as you can, you will need it one day. Glad to hear you got a proper fret saw. Back in the day I tried to modify 4 or 5 regular saws, but the best one is one made for the job.

Taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Forum

Licence plates

Started by Michael Myers in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd on Friday. 15 Replies

Completed Builds

Started by ThePracticalPeasant in Building Secrets, Tips, Advice, Discussion. Last reply by ThePracticalPeasant Oct 20. 5 Replies

Chords

Started by Mitchell Cutsinger in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Sep 29. 5 Replies

Blog Posts

Leonard Cohen Life

Posted by Keith Rearick on October 7, 2021 at 11:18am 0 Comments

CBGer’s Lament

Posted by Ghostbuttons on October 3, 2021 at 12:11am 0 Comments

Sasquatch!

Posted by Mark E. Martinsen on September 29, 2021 at 8:39pm 3 Comments

Prototyping with a big ol' wine box

Posted by Ben on September 23, 2021 at 4:00pm 0 Comments

Mr. Bells

Posted by Stephen Cohen on September 4, 2021 at 12:30pm 0 Comments

Latest Activity

Jerry Jordan commented on Chuck Hunsinger's photo
Thumbnail

IMG_20211026_192544

"Nice, that’s what we do. Looks like great fun "
11 minutes ago
AGP # posted photos
39 minutes ago
the anonymous pick commented on 3 String Blues's photo
Thumbnail

who can relate???

"I'm with the  "Don't change them one bit." camp.  for many reasons…"
1 hour ago
the anonymous pick commented on Cigar Box Nation's video
Thumbnail

Junkyard Drums, Baritone Guitars & Pipe Organ Amps

"The pipe amp on the bar stool made me think it was a"spinner"  , like a Leslie…"
4 hours ago
Chuck Hunsinger commented on 3 String Blues's photo
Thumbnail

who can relate???

"That's funny! And yes I can relate."
6 hours ago
Doug Thorsvik commented on Uncle John's photo
6 hours ago
Doug Thorsvik commented on Uncle John's photo
Thumbnail

New CBB. 5 string banjo

"Lookin’ good Uncle John! You are getting the maximum mileage out your fret purchases.…"
6 hours ago
the anonymous pick posted a photo

smokable swamp witch guitar

Yup , you can actually smoke this one . faux volume knob is a cover FOR THE COB PIPE , . mouthpiece…
6 hours ago
Chuck Hunsinger posted a photo

IMG_20211026_192544

My first attempt at a bottle neck slide
7 hours ago
Chuck Hunsinger commented on 3 String Blues's video
Thumbnail

Home on the Range - Acoustic Box Guitar

"Wow! Very nice, very tastefully done. I love the way you play, thanks for sharing that!"
7 hours ago
Doug Thorsvik commented on Poorness Studios's video
Thumbnail

Adding an External Speaker Jack to the Orange Crush 12 (or any guitar combo amp)

"I am getting close to being motivated to do something with my Danelectro HoneyTone amp. I already…"
10 hours ago
Charred added a discussion to the group How to Play a Cigar Box Guitar
Thumbnail

Mindbender (by Stiltwater)

Can Mindbender, by the band Stillwater, be done on a three-string fretless guitar?…See More
10 hours ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->