Hey y'all. Has anyone ever used Howard's Feed-N-Wax on the fretboard and liked it?

Views: 240

Reply to This

Replies to This Discussion

Only drawback is wax tends to trap dirt in with it? So maybe something with less wax, like Tru-oil?

I agree with Brian Q.....an oil finish would be preferable to wax in my opinion, less chance of gumming up the string windings over time too. 

On my boards, all hardwoods, all I use is lemon oil, smells nice too! It's really all a fretted board needs, and on a fret-less if you do get a bit of string wear over time, it's easy to sand it out when it's time for a bit of maintenance.....or just leave it as it is, honest wear and tear, if it's not affecting playability.

One point worth mentioning is to avoid over oiling....it can sometimes soften the wood and frets can work loose....not so much of a problem if you glue them in, but there's two schools of thought on that one as well...! I do mine about 3-4 times a year with lemon oil....the idea is to stop the unfinished wood drying out too much and potentially cracking, although this is something I've never seen in 'real life' on a properly maintained instrument.

Hope this helps!

I like using lemmon oil

Beware, most lemon oil is artificial lemon & yellow coloring? Not good if your neck has binding? Plus your fretboard doesn’t need artificial colors or chemicals that can lift frets/ binding. Food grade mineral oil & pure linseed oil is best? Pure linseed is hard to find, most boiled linseed has solvents in it FYI, you don’t want solvents on your fret board? Also tung oil is for furniture, not guitars, there’s a few different petroleum solvents used as penetrators in tung oil? Better off using something recommended by the guitar manufacturers, they’ve done all the research, they know what works best? 

Your last point is exactly why I use D'Addario 'Planet Waves' lemon oil Brian...…I've used their stuff, including strings, for years. As well as many other useful items of hardware etc, they do a really good set of 3 stage polish's too, if you like polishing....

I use organoil hard burnishing oil, a tung oil preparation. 

When I visited the Kamaka ukulele factory they used Whatco Danish oil. 

Generally any light finishing oil will suffice though try to minimise the use of oils that may contaminate your strings. Always buff as much of the oil off as you can and give it a bit of time in the sun to really kick off the hardening. Especially if using steel strings.

Just a couple of things I would like to mention on this subject.

Its often been suggested in the past on the forum that wax it not a good medium to use as it attracts dirt and dust. It may depend on how it is applied or the type of wax, because I have not experienced the problem in over 30 years of cleaning and treating customers fingerboards with a wax.

As part of my service, no matter what the repair, I always polish the frets and clean and treat the fingerboard. In all those years that's a lot of fingerboards getting waxed. Never a problem. 

How much do I apply? Well if I say I've used the same can of teak wax 750gms in all that time might give an indication.

I recon I apply far less than a runny liquid or spray does. People that use excess treatments get charged more for their refrets due to the extra work it can create.

Taff

Thanks to all of you for your replies. Lots of help. I have a couple of CBG goof-ups that I may try the Feed-N-Wax on, just for fun, but I believe I will pretty much change to Lemon Oil. Does anyone know if Gitty glues the frets on their fret-boards?

Hi, If the slots are correct size for the fret tang I would not think it is a requirement to glue in frets on a narrow flat board.

I glue in frets on a wider radiused board. I don't know what Gitty does though, it does add a bit of time to the fretting process.

Taff

I like a Minwax product,  which is their paste "finishing wax"  -  after frets are in,  I can just rub it in with a rag.  It dries hard,  not sticky at all,  and therefore does not attract dirt/dust.

seems like I tried paste wax.,too messy.,..,i stick with Zinsser Amber Shellac or Krylon black spray paint on Oak.,.,years ago I used vegetable oil in a pinch, but in my old age I would not recommend it.,.,gums up over time.,.,. I have used the oils on Rosewood or Ebony with good results..,. 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Piezo disc under fretboard

Started by Will "KOOL DOG HOOCH" Bonner in Other stuff - off topic, fun stuff, whatever. Last reply by Will "KOOL DOG HOOCH" Bonner 9 minutes ago. 7 Replies

Yamaha yg15 schematic needed

Started by Will "KOOL DOG HOOCH" Bonner in Other stuff - off topic, fun stuff, whatever. Last reply by Will "KOOL DOG HOOCH" Bonner 7 hours ago. 26 Replies

Pan for a resonator

Started by Will "KOOL DOG HOOCH" Bonner in Other stuff - off topic, fun stuff, whatever. Last reply by Paul Craig yesterday. 8 Replies

Placing piezio rod

Started by Steve Eckel in Performances, How to Play, Lessons, Concerts. Last reply by Will "KOOL DOG HOOCH" Bonner on Thursday. 7 Replies

Single-layer boxes?

Started by Sean Murphy in Building Secrets, Tips, Advice, Discussion. Last reply by Tim Pannabecker on Thursday. 6 Replies

Trivia Quiz

Started by Tim Pannabecker in Building Secrets, Tips, Advice, Discussion. Last reply by the anonymous pick on Wednesday. 9 Replies

Equalizer preamp

Started by Will "KOOL DOG HOOCH" Bonner in Other stuff - off topic, fun stuff, whatever. Last reply by Will "KOOL DOG HOOCH" Bonner on Tuesday. 8 Replies

Decal top removal

Started by Robert Bryan in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Monday. 3 Replies

Blog Posts

Latest build

Posted by Sean Murphy on May 8, 2019 at 9:03pm 4 Comments

Netherlands Tour

Posted by Dar Stellabotta on May 8, 2019 at 5:33pm 0 Comments

Sunday canjo fun

Posted by Sean Murphy on April 21, 2019 at 5:26pm 2 Comments

Finding Xanadu in Memphis

Posted by Poorness Studios on April 13, 2019 at 6:00pm 5 Comments

Latest Activity

Will "KOOL DOG HOOCH" Bonner replied to Will "KOOL DOG HOOCH" Bonner's discussion Piezo disc under fretboard
"That was my understanding from what I read and heard, I'm putting one in the bridge, two disc,…"
9 minutes ago
Eero Tapani Lehtinen commented on Eero Tapani Lehtinen's video
Thumbnail

Godfather, mando and some delay

"Kyllä, se on hattu! Thanks Dave and John."
53 minutes ago
Eero Tapani Lehtinen liked Randy S. Bretz's photo
56 minutes ago
Eero Tapani Lehtinen liked Wal Callaby's photo
58 minutes ago
Dennis "Denbo" Goodinson liked BeetleJuice!'s video
2 hours ago
Dennis "Denbo" Goodinson commented on Richard Sundberg's video
Thumbnail

1970 Olds F85 Daydreamin. Derek Rose & Richard Sundberg

"Cool track Guys, I'm having flashbacks, '71 Firebird, I was dreaming too then :))"
2 hours ago
Dennis "Denbo" Goodinson liked Richard Sundberg's video
2 hours ago
the anonymous pick commented on the anonymous pick's video
5 hours ago
the anonymous pick commented on Uncle John's video
5 hours ago
the anonymous pick commented on AGP #'s video
5 hours ago
BrianQ. replied to Will "KOOL DOG HOOCH" Bonner's discussion Piezo disc under fretboard
"Rod piezos work best when the strings are in contact with them?"
7 hours ago
Will "KOOL DOG HOOCH" Bonner replied to Will "KOOL DOG HOOCH" Bonner's discussion Yamaha yg15 schematic needed
"I'm looking into it. Thanks"
7 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->