I started throwing together a LP build yesterday, and have got this far:

So... I've made a pretty sturdy box (3/4" thick pine) with a plywood base, and have the plate attached with 8 screws on the original mounting points and one at each corner. I haven't added the frets or indeed set up a nut (currently just a bone nut blank). I'm not expecting it to be loud but I'm planning to fit dual piezos in there eventually.

This is my first try at a bolt bridge, which looks cool for this style of guitar but seems to buzz pretty horribly all the way up the neck (but curiously not when played open...) - is there any special preparation that needs to be done to use of of these?

Break angle behind the bridge seems fine, certainly no less than I've successfully used in the past.

Also, I've tried with a wooden/bone bridge as I normally use too, and it seems to have the same problem. It sounds slightly less hideous with a slide. Think it'll sound better once the frets are in?

Any thoughts?

Views: 4104

Reply to This

Replies to This Discussion

hey!...that's not a Union Jack.....

 Who said Union Jack ???

 

 

Either picture of a brit band needs a Union Jack plate, or...the picture accompanying a Confederate battle flag LP ought to be... errr...Duck Dynasty...or...???

That's sweet!

Looks cool,I started a doubleneck reso-plater,but its definetly on the back burner.I'd like to make a box like yours,I've got a bunch of old(60's)AZ plates.

I was wondering if you had a good frame if you could have a plate on the top and back.

[UPDATE #3]

I've recorded a short sound sample of the guitar's (almost) clean tone, I'm quite pleased with the sound but I think some new thinner strings and a higher tuning are a priority. I think it will sound pretty good with some distortion as well so I'll give it a try through my Line6 over the next few days. Thanks again for all your help!

...and I was also going to mention that I like the way some of the properties of the license plate come through even through a magnetic pickup, i.e. it sounds very different to a CB guitar. I think I might add a few more screws around the edge of the plate to cut down on some of the weirder bits of harmonic resonance I'm hearing :)

Sounds awesomely good to me
I would be happy with that
Try AEA but watch you sound board
Can take it as you go.
Martin bronze heavy acoustic strings
Are nice but noisey with a slide.
Lovin that tone. P.s it sounds way better than the one of the pic I posted.
Thanks Buggy. I'm going to go with FCF as even GDG is a little high for my vocal range. I don't (can't?) play slide and prefer lighter strings, as a rule.
What I found is that the aluminum plates sound "blah" - I like using old steel plates which seem to resonate better. Not sure why
Old steel plates are thicker and stiffer than the newer aluminum ones.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
3 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
3 hours ago
BrianQ. commented on Dar Stellabotta's video
7 hours ago
BrianQ. liked Dar Stellabotta's video
7 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
9 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
9 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
11 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
11 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
12 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
13 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
13 hours ago
A.D.EKER commented on Ricky D's photo
13 hours ago

Events

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->