Well I finished my first a couple of days ago.  Fretless Acoustic.  Learned a lot and getting ready to start

my second.  Sounds good!  On these type of boxes is there a latch or something that

I can get to keep the lid fastened?  

Views: 111

Attachments:

Reply to This

Replies to This Discussion

I usually build a post or two to screw the lid down, if it doesn't already have a latch. I've thought of putting a couple of strong magnets into posts on the inside that would face each other to magnetically hold it closed, but haven't tried it yet. I'm guessing there might be some problems with that design due to buzzing from the vibration. Might try that my next build.

Also, congrats on the build!

Huh! Good idea. I guess you glue a post on the inside of the box and make the height of the post just right to use velcro attached to top of post and the inside top of the box........

i wouldnt recomend velcro. it would deaden the top and not let it vibrate. probably ok on a electric only build.

on another note, have a look at pictures of other acoustic CBG's bridge placement and gret for ideas to " inspire you" , pinch that is...lol

Either gluing it down or screwing it down is the best, a loose lid will bring unwanted buzz?

Timothy,

I followed the Gitty Basic Plan (Glenn Watts) and that's the way it's setup on bridge placement based on 31" of neck material length. Realize it's not ideal and the bridge should be moved more towards the center of box a little.  Just didn't want to deviate from plan on the first one.

Thanks on the velcro. I think you're correct, probably would dampen vibration of the top. Will look for another way. The reason the neck falls open just a tad when playing is that I made a "test" neck first using pine and cut the cigar box notches based on that and it fit perfectly. Made a new neck with Poplar and the width of the board was a slight bit under 1.5" so I ended up with some "play" between the neck and the box. Was thinking I could probably come up with some type of "shim" that you can't see to tighten the connection and that would solve the problem.

Thanks again,
Mark

The Missus got these for me to hold down and decorate the corners. not sure where she got them she does a lot of scrap booking etc and probably cant rmemeber herself..lol

Timothy those are pretty sporty looking. Would look great on a box!

On latching down the top. I had some maple veneer that I thinned down and used
as shims for the small gap between the neck and the box. Stained them to match the stain I used on the neck and placed a drop of thin CA Glue to anchor them in place.
Worked great! Box is now tightly closed up.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor


Recommended Links & Resources


Forum

Cigar Box Amp Mods

Started by Cigar Box Nation in Feature Articles. Last reply by RTZGUITARS on Friday. 14 Replies

Blog Posts

Mr. Bells

Posted by Stephen Cohen on September 4, 2021 at 12:30pm 0 Comments

Bookie's Poor Man's Dobro

Posted by Steve Bookout on July 18, 2021 at 2:04pm 4 Comments

Get your groove on for free

Posted by François on July 13, 2021 at 3:05pm 1 Comment

Latest Activity

Cigar Box Blues commented on Uncle John's photo
Thumbnail

Outhouse Row. Got TP? Dave L fore ground and Mose in the back.

"she belongs to the world's collection John!...I found it in an online library in Florida about…"
48 minutes ago
Doug Thorsvik commented on Uncle John's photo
Thumbnail

Our friend, Dave Lynas, passed away Friday, 9,17,21

"He was a man of many talents and freely shared them with us. We have been blessed!!!"
1 hour ago
Doug Thorsvik commented on Jerry Jordan's photo
Thumbnail

3x3=9

"Wow! Those are wild Jerry. Sure to stand out in a crowd."
1 hour ago
Doug Thorsvik commented on Uncle John's photo
Thumbnail

Good playing fretless. GDG.

"Nice, clean looking build Uncle John! I haven’t really fooled around with slide; having too…"
1 hour ago
Doug Thorsvik commented on Uncle John's photo
Thumbnail

Dave Lynas art

"Five thumbs up!!!"
1 hour ago
Doug Thorsvik commented on Rich's photo
Thumbnail

Padron 4 hole head stock back

"Back side of the same record! I get it Rich!!!"
1 hour ago
Doug Thorsvik commented on Rich's photo
Thumbnail

Padron 4 hole whole

"A real looker Rich! You brought your “A Game” artistic flair."
1 hour ago
Doug Thorsvik commented on Rich's photo
Thumbnail

RTL Fret markers - Commercial Sign Vinyl

"Trade secrets reveals! Great idea Rich."
1 hour ago
Doug Thorsvik commented on Rich's photo
Thumbnail

Padron 4 hole front

"Love the sound holes Rich! They really pop with the black screening; very…"
1 hour ago
Doug Thorsvik commented on GARAGE HERMIT's photo
Thumbnail

tennis racquet git

"Very cool Garage Hermit! I haven’t seen one done with a metal tennis racket; you aced it."
1 hour ago
Randy S. Bretz posted a photo
1 hour ago
Uncle John commented on Uncle John's photo
Thumbnail

Outhouse Row. Got TP? Dave L fore ground and Mose in the back.

"Oh!~  I see it now, Brian.  That tricky Dave."
3 hours ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->