Hi Will, that could depend on the many different types out there. Some are flush level with the guitar side, some sit on top of the guitar side. All the ones I just checked are 5mm off the face of the preamp for sliders and 7-8mm high for knobs. Most were under 10mm high off the guitar side, but varied.
some preamps sit on top of timber some are recessed.
Hope that makes sense Taff
Thanks Taff, I was referring to the one CB GITTY sells.
I thought you was talking general. Best ask him then.
I don’t know how high in inches, but it can’t stick out more than any other preamp? Maybe there’s measurements of the specs on the site?
Thanks, I was just hoping someone had one installed for a quick answer? Most specs give overall dimensions. Not a big deal. Thanks
You'll also have to think about the surface being curved instead of flat since they were made for the side of a acoustic guitar.
There are some flat ones, but don't know if Gitty sells those yet.
Gitty's mention that there was a slight curve, but with two extra screws and a foam shim it would work. I ordered two flat ones that are coming on a "slow boat from China"! Hopefully they work! Thanks.
Nick over at CB GITTY was gracious enough to measure off one for me, so now I can figure out if my idea will work. Thanks everyone!