Does anyone know how high the nobs and slide switches protrude on the preamp from the mounting surface?

Views: 139

Reply to This

Replies to This Discussion

Hi Will, that could depend on the many different types out there. Some are flush level with the guitar side, some sit on top of the guitar side. All the ones I just checked are 5mm off the face of the preamp for sliders and 7-8mm high for knobs. Most were under 10mm high off the guitar side, but varied.

some preamps sit on top of timber some are recessed.

Hope that makes sense Taff

Thanks Taff, I was referring to the one CB GITTY sells.

I thought you was talking general. Best ask him then.

I don’t know how high in inches, but it can’t stick out more than any other preamp? Maybe there’s measurements of the specs on the site?

Thanks, I was just hoping someone had one installed for a quick answer? Most specs give overall dimensions. Not a big deal. Thanks

You'll also have to think about the surface being curved instead of flat since they were made for the side of a acoustic guitar.

There are some flat ones, but don't know if Gitty sells those yet.

Gitty's mention that there was a slight curve, but with two extra screws and a foam shim it would work. I ordered two flat ones that are coming on a "slow boat from China"! Hopefully they work! Thanks.

Nick over at CB GITTY was gracious enough to measure off one for me, so now I can figure out if my idea will work. Thanks everyone!

It turns out I was concerned about nothing! The pre-amp won't come into contact with the neck. The box is deep enough that the pre-amp will go underneath the neck. I was worried about having to notch the neck on the side

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Spring Reverb Advice

Started by Clint Spotts in Building Secrets, Tips, Advice, Discussion. Last reply by Clint Spotts 51 minutes ago. 11 Replies

Help Tuning

Started by Joan Pace in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans 4 hours ago. 1 Reply

Lid thickness question.

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Thursday. 9 Replies

Hurdy Gurdy

Started by Rooster Reaves in Performances, How to Play, Lessons, Concerts. Last reply by Andries D. EKER on Thursday. 3 Replies

Box Size

Started by Art Prior in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Thursday. 1 Reply

Store Front

Started by Josh Thompson in Building Secrets, Tips, Advice, Discussion. Last reply by Casey Smelser on Thursday. 13 Replies

CBGs for troops, help!

Started by Will "KOOL DOG HOOCH" Bonner in Other stuff - off topic, fun stuff, whatever on Tuesday. 0 Replies

Glue Mold???

Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by Brent Kasl on Tuesday. 4 Replies

Blog Posts

Buying in bulk

Posted by Rick Tish on August 17, 2019 at 6:31pm 0 Comments

Shellac

Posted by Rick Tish on August 15, 2019 at 7:08pm 0 Comments

first post

Posted by Rick Tish on August 14, 2019 at 8:23am 0 Comments

My first

Posted by Myron Joe Hickel on August 11, 2019 at 9:13pm 5 Comments

Latest Activity

Tim Pannabecker commented on Daniel Walter's photo
Thumbnail

it works....

"Nice Dan"
30 minutes ago
Clint Spotts posted a photo

Trap-O-Phone

Made a daxophone out of an old rat trap. Gotta make a tongue yet...probably whittle one from a…
33 minutes ago
Clint Spotts replied to Clint Spotts's discussion Spring Reverb Advice
"Thanks for the info! May find old lamp @ Goodwill or garage sale. Quality build btw. Some good…"
51 minutes ago
Clint Spotts commented on Downtown Vinnie's video
Thumbnail

Buckle Up Betsy

"Wah-wah-wonderful tone! Nice job!"
1 hour ago
Clint Spotts liked Downtown Vinnie's video
1 hour ago
Duane M updated their profile
1 hour ago
Taffy Evans replied to Clint Spotts's discussion Spring Reverb Advice
"Hi Clint, I am new to the spring thing so proberebly will not contribute much, listen to the others…"
1 hour ago
Duane M posted a photo

Secret-Society-build

24 1/2" scale poplar box and neck, cedar fingerboard. Internal reverb built with springs and pot…
1 hour ago
Duane M liked JD's discussion cigar box sitar; first time post
2 hours ago
Fantacone Box Works commented on High Bird Handcrafted Instuments's photo
2 hours ago
Fantacone Box Works liked High Bird Handcrafted Instuments's photo
2 hours ago
High Bird Handcrafted Instuments posted photos
3 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->