Easy DIY Pre-Amp: Makes Piezo-Equipped Cigar Box Guitars Sound Better

Reduced feedback.  Deeper bass response.  And no more "quack!"

We were complaining about all the problems with piezo pickups when the idea for this standalone pre-amp came to me.  It's deceptively simple... a $17 acoustic guitar pre-amp with a hacked input becomes a great EQ and signal boost.  And it's all housed in a cigar box!   

First of all, here's how it sounds...

I built this prototype in less than one hour.  Here's how to do it:

PARTS NEEDED:

  1. C. B. Gitty Pre-Amp Unit Model EQ-7545R ($16.49)*
  2. 1/4" guitar jack ($6.49/3 pack)
  3. Empty cigar box that is deep enough to house the pre-amp.  These boxes from Gitty are a good example. 
  4. 9 volt battery

(*Note: a piezo rod pickup is included with the pre-amp.  We'll need this!)

TOOLS NEEDED

  1. Wire stripper/cutter
  2. Soldering Iron and solder
  3. Coping saw, scroll saw or Dremel rotary tool.
  4. Small #1 Phillips head screwdriver

Here's a quick overview of the process.  We'll get into detail with photos after the video:

STEP 1: Cut a 3.5" x 1.5" hole in the box to fit the pre-amp.   You can use a coping saw, carpenters knife or a Dremel rotary tool with a cutting disk. 

STEP 2:  Drill two 3/8" holes in the box, one for each guitar jack needed.

STEP 3:  Take the rod piezo out of the pre-amp packaging.  Using wire cutters, cut off the rod piezo pickup from its wire.  Cut closest to the pickup, leaving the longest length of wire possible.

STEP 4:  Pull back the ground wire sheath to expose the lead wire.  Strip off 1/4" of the lead wire's insulation.

STEP 5: Solder the ground sleeve wires to the ground prong (the inner, circular portion of the jack).  Solder the lead wire to the other prong (the lead prong) of the jack. This is now our hacked pickup wire and will become the input jack.

STEP 6: Insert the 1/8" plug of the hacked pickup wire into the receptacle of the pre-amp unit.

STEP 7: Install both guitar jacks to the cigar box.  I would recommend positioning the hacked wire (Input) on the right side of the layout and the the black plastic jack (Output) on the left side.  Also insert the 9 volt battery at this time.

STEP 8:  Mark your input and output jacks accordingly.  I used a woodburning pen.  You could use paint or any other method.  (Remember, this pre-amp in the photos is a prototype. My next one will have a cooler layout, better graphics, a carrying handle and feet!)

OPTIONAL- ADD A HIDDEN GUITAR PICK CADDY:  If there's extra room in the box, you can glue an Altoids tin to the bottom.  I simply used a hot glue gun to attach the bottom of the tin to the inside bottom of the box.

ADDITIONAL NOTES:

  • Unplug the guitar cables when not in use or it will drain your 9 volt battery.
  • Dialing-in the right tones is an art.  Each instrument is different.  The pre-amp is there to sculpt the tones ... and to also give signal boost to low-output piezos.
  • If the guitar sounds too distorted, try dialing back the volume on the pre-amp and increasing the volume on the amp/PA system.
  • If you sell cigar box guitars with piezo pickups, these pre-amps could be a great way to make additional income.  Get fancy with them and give them a product name.

Good luck!

-Shane Speal, 2016 

Views: 5608

Reply to This

Replies to This Discussion

Good idea Shane.

It would be a good idea to have one in a pedal chain/pedal board too.

Very helpful.  Thanks for posting this.  I have been kicking around the idea of building a stand alone preamp, and this just cleared up any questions I had.  

Is it a standard 1/8 (3.5mm) mono audio TS on the piezo?  I'd almost rather get the solder yourself male connector and make up the 1/4 F to 1/8 M cable and use the piezo on the git...

It's always better to install the pre-amp directly in the guitar...however, many of us have CBGs with plain pickups and no pre-amp.  This stand-alone unit allows us to properly EQ and boost those older guitars.

What I meant was, instead of cutting the piezo wire, will the pre-amp accept a 1/8" (3.5mm)  male end plug? 

I have a few ideas rattling around the empty corners of my noggin about saving the piezo intact for something else.

All the ones I had were 2mm not 1/8 inch. They are available from many hobby electric shops. YMMV

Neato and uber sound too. Looks like an awesome bit of kit to confound the muggles even more and enrage purists of the  sacred, store-bought axe. I must give this a go. Thanks Shane, and all the best with your online concert too.

Brilliant!
Great Stuff!!!

\uap>Dang it Shane! How am I supposed to get any of my projects done if you keep posting these DIY hacks???

\uap>

\uap>

Wait'll you see what I did with a beer can...

RSS

The Essential Pages

New to Cigar Box Nation?How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

 

Recommended Links & Resources

Forum

Fret board Length

Started by Tim Castagnola in Building Secrets, Tips, Advice, Discussion. Last reply by Daniel Walter yesterday. 18 Replies

Internal resonator question.

Started by Paul Stephen Eklund in Building Secrets, Tips, Advice, Discussion. Last reply by Andries D. EKER on Monday. 13 Replies

VIDEO & PICS: Reso Bass by Jason Mills of Highwood Guitars

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Timothy Hunter on Monday. 17 Replies

Neck length?

Started by John E Curley in Building Secrets, Tips, Advice, Discussion. Last reply by Christopher G Daniels on Monday. 10 Replies

Volume/tone knobs

Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by the anonymous pick on Monday. 1 Reply

VIDEO & PICS: Daniel Hulbert's Double Neck Ukulele

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Rob Uker on Monday. 2 Replies

Blog Posts

CBG FESTIVALS

Posted by Allen on January 12, 2019 at 11:47am 4 Comments

Homemade Cigar Box Guitar Pickups

Posted by BeetleJuice! on January 10, 2019 at 6:30pm 0 Comments

The long and winding road

Posted by Will Carter on December 28, 2018 at 8:35am 2 Comments

Latest Activity

Donkey commented on Will Carter's blog post The long and winding road
"There are few things more moving than a father-son story, and this one is no exception. Your story,…"
5 minutes ago
Bob "Ambrose" Negus liked Dennis "Denbo" Goodinson's video
8 minutes ago
Bob "Ambrose" Negus liked Uncle John's photo
19 minutes ago
Daniel Walter left a comment for Gerald Schwenke
"very pretty. like the saw cuts for frets. what's the scale length?"
25 minutes ago
Daniel Walter commented on Uncle John's video
Thumbnail

Needed Time

"Too large I think. How do you and other folks record? I appreciate your comment(s) yesterday…"
30 minutes ago
Uncle John commented on Uncle John's video
Thumbnail

Needed Time

"I'd like to hear it.  I don't know how to post from an I phone.   Some…"
37 minutes ago
Don Craig liked Rooster's photo
45 minutes ago
Don Craig liked Gerald Schwenke's photo
46 minutes ago
Don Craig liked Gerald Schwenke's photo
46 minutes ago
Don Craig liked Daniel Walter's photo
47 minutes ago
Daniel Walter commented on Uncle John's video
Thumbnail

Needed Time

"Uncle John, my wife sang the song I mentioned for my iPhone, but I don't know how to post a…"
49 minutes ago
Daniel Walter posted a photo

Lefty

Only had one piece of wood long enough, so placed it vertically. Feels good in your hand.
54 minutes ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://api.ning.com/files/Stym6V-ACBaiDP5ilIPA6bJ3rn0ZdlI1EwGHWgROvEkwiCCaNgzJRcZTZH8OGkV3fvK-NboXjThXltWFbcihM-jI4Mwz5SV3/scrollup_icon.png") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->