Dual Piezo Wiring with Passive Tone Controls, balance pot and Active pre-amp - Cigar Box Nation2024-03-29T12:39:59Zhttps://www.cigarboxnation.com/forum/topics/dual-piezo-wiring-with-passive-tone-controls-balance-pot-and?feed=yes&xn_auth=noReading something some where…tag:www.cigarboxnation.com,2015-09-01:2592684:Comment:23842302015-09-01T12:50:58.129ZS Machttps://www.cigarboxnation.com/profile/SMac
<p>Reading something some where got me thinking the balance pot could be making the piezos react in a strange way. I have a switch circuit designed that will change from series, parallel and the current "balance wiring". I suspect its almost like the balance wiring makes the pickup act like a capacitor. Its sounds pretty good like this except for the excessive low end.</p>
<p>Reading something some where got me thinking the balance pot could be making the piezos react in a strange way. I have a switch circuit designed that will change from series, parallel and the current "balance wiring". I suspect its almost like the balance wiring makes the pickup act like a capacitor. Its sounds pretty good like this except for the excessive low end.</p> http://www.metalguitarist.org…tag:www.cigarboxnation.com,2015-09-01:2592684:Comment:23843012015-09-01T12:22:07.794ZS Machttps://www.cigarboxnation.com/profile/SMac
<p><a href="http://www.metalguitarist.org/forum/guitar-tech-electronics-and-diy/773-tight-control-simple-passive-bass-cut.html" target="_blank">http://www.metalguitarist.org/forum/guitar-tech-electronics-and-diy/773-tight-control-simple-passive-bass-cut.html</a></p>
<p><a href="http://www.metalguitarist.org/forum/guitar-tech-electronics-and-diy/773-tight-control-simple-passive-bass-cut.html" target="_blank">http://www.metalguitarist.org/forum/guitar-tech-electronics-and-diy/773-tight-control-simple-passive-bass-cut.html</a></p> This link has a great bit of…tag:www.cigarboxnation.com,2015-09-01:2592684:Comment:23841322015-09-01T12:21:39.889ZS Machttps://www.cigarboxnation.com/profile/SMac
<p>This link has a great bit of info on a HPF / bass cut for magnetic pickups. Would I be correct in thinking this circuit would work after a piezo pre-amp?</p>
<p>I won't have my banjo on the table until next week but I will test all this and post the results.</p>
<p>This link has a great bit of info on a HPF / bass cut for magnetic pickups. Would I be correct in thinking this circuit would work after a piezo pre-amp?</p>
<p>I won't have my banjo on the table until next week but I will test all this and post the results.</p>