What are some possible things to use to make for tuners? Like Eyebolts or Dowels? 

also How can you make those improve tuners work well? 

I don't understand why there isn't a lot of information on DIY or homemade tuners. I bet the original CBGs didn't have guitar tuners. 

Views: 367

Reply to This

Replies to This Discussion

I use a piece of aluminum angle and an eye bolt for one stringers. Made a 2 stringer the same way. Hard to tune it though. 

Yes , indeed it could be a bear to tune that style. I remember putting a nut on both sides of the alum. angle to maintain a better grip on eye bolt? Cheers, looks good 

Yep, I tried the locking eye bolt tuner configuration also.

Hi, there has been a fair bit of info posted on here, but it's posted and filed away.somewhere I imagine.

Original CBG builders didn't have the internet either, if one wants to take DIY one step further then, necessity is the mother of invention. 

Taff

I've tried a few alternatives, some have worked ok, many have just eaten strings, I truly recommend, even for the most funky/down home roots machine, manufactured tuners, if you choose to ignore this advice, fine, it suggests you are serious, but the effort required, and the failure rate, says to me, "do I need this crap to save 3 bucks"?

My latest reinvention of the wheel is using nails as zither pins. Hammer one end flat, put a hole  in it for the  string, use sandpaper to mimic microthreads drive it into a hole a drill size or so smaller than the nail. 

I get two out of a 100 mm nail by cutting them in half. More detail in how  used them for this build

https://www.instructables.com/id/Lap-Harp-Psaltery/

For an even lower tech solution the original design of asian long zithers like the koto  had no tuners. The strings were tied on as tight as possible and tuning was done by either moving the bridges and/ or swapping the bridges  for higher or lower ones. Modern ones use regular zither pins. Check out Luna Lee doing ACDC covers on a gayageum, the Korean version.

Invested in a peg shaver and peg hole reamer and made my own out of scrap oak in a maple headstock, worked well.

not as precise as tuning machines, and since the machines are dirt cheap....

One reason there isn't a ton of information on "Improv" tuners is that it is usually a great deal of work that, in the end, doesn't work so well. If you want an instrument you can play on a regular basis, then you would want it to hold tune. Eye bolts and friction pegs just don't seem to be able to hold tune very well with metal strings.

I guess you could go back to cat-gut strings or something like that and get away with improv tuners, but if the point is a daily player, then take advantage of the materials that will help provide that.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

LM386 Amps, AliExpress

Started by Patrick Allison in Performances, How to Play, Lessons, Concerts. Last reply by Patrick Allison 17 hours ago. 2 Replies

Hendrix

Started by Lennox Gavin in Performances, How to Play, Lessons, Concerts. Last reply by Tim Pannabecker on Sunday. 3 Replies

Problem CGB

Started by Thomas Rasmussen in Performances, How to Play, Lessons, Concerts. Last reply by Thomas Rasmussen Mar 14. 18 Replies

Nylon Strings

Started by Mark Rinehart in Building Secrets, Tips, Advice, Discussion. Last reply by the anonymous pick Mar 13. 1 Reply

South Africa

Started by Marius in Performances, How to Play, Lessons, Concerts. Last reply by the anonymous pick Mar 12. 1 Reply

Latest Activity

Vern Hallett liked Dennis "Denbo" Goodinson's photo
2 minutes ago
George Ross liked Poorness Studios's photo
2 minutes ago
George Ross liked Dave Streeb's photo
3 minutes ago
George Ross liked Dennis "Denbo" Goodinson's photo
4 minutes ago
Shane Speal shanespeal.com posted a video

Led Zeppelin Heartbreaker 3 String Guitar Lesson

Here's my first lesson video. Gotta start out with Zeppelin right? It's pretty simple but has a tricky bent part behind the nut. Great for practicing dexteri...
46 minutes ago
RTZGUITARS commented on RTZGUITARS's video
Thumbnail

Dick "The Godfather" Dale Thank You

"Thanks Brian, he was here about 10 years ago want to go but missed it."
1 hour ago
Dave Lynas liked Dennis "Denbo" Goodinson's photo
1 hour ago
Dave Lynas liked Maddog's photo
1 hour ago
Dave Lynas liked Maddog's photo
1 hour ago
Lee Custom Shop posted a video

Бомж Трио соло на сигарбокс гитаре

Сигарбокс Гитара | Нэш | Ворон
2 hours ago
Poorness Studios liked Maddog's photo
2 hours ago
Uncle John commented on Poorness Studios's photo
Thumbnail

Found a speaker grille for the CBA

"That does look great and protective too.  You were right.  better with the cover."
2 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->