Curious about other builders building sequence. ie., when to install frets.


I always suspect that most builders put the frets in after the fretboard is glued to the neck.  I make the fretboard, cut the fret slots, and hammer in the frets on the bench.  I generally put the fretboard in temporarily with double backed tape just to make sure everything is good.  Then I string it up and play it a bit .  After that I will cut the sound hole, glue the fretboard and string it up again.  When I clamp the fretboard for glue, I consider this operation the final fret seating process.  I have plenty of clamp pressure across all the frets.  Also, I have a special board that I put on top, which is a little narrower than the fretboard so that I can see the alignment of the fb on the neck.  I won't even check for high frets until the fb is glued in.  If I were to hammer the frets in after the fb is glued, I would have to make a jig to support the neck.


Views: 647

Reply to This

Replies to This Discussion

I agree.  We all have our methods and reasons for using different sequences.  It may be due to the tools we have or don't have, our experience level, the different type of instruments we are building, etc.  I am continually looking for and experimenting with different methods of building to ultimately make the build faster and better.

That's true with me, Gary. My methods are based entirely on getting it done with what I have available.

I broke down and bought a fret blade for my table saw, and use a shooting board with a template.  I make 10-20 fretboards at once... I rip the widths, then cut to length, setup and fret...  It saves me a ton of time, and I'm buying 1/4" thick exotic hardwoods from a wood supplier that specializes in hardwood floors...  $60 gets me a good 30 fretboards and scraps to make banjo style bridges...

Then I have a template for marking fret markers.. I drill a bunch of fretboards at a time for inlay...  

I'll glue the inlay dots in, sand them flush on a fine grit beltsander,  Then they get glued to the neck, sanded flush.  I apply 2-3 coats of wipe on poly, then fret....  I finish the frets on the belt sander, then cleanup the edges with a file.  A wipe down with poly on the edges, and the neck is ready to glue to the box, or add a tailpiece, etc.

Hey John,  I've seen pictures of  the table saw method, that seems like the best way to get the best results. Do you have less filing high frets and whatnot since you started using the tablesaw?


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Cigar Box Amp Mods

Started by Cigar Box Nation in Feature Articles. Last reply by RTZGUITARS 18 hours ago. 14 Replies

Blog Posts

Mr. Bells

Posted by Stephen Cohen on September 4, 2021 at 12:30pm 0 Comments

Bookie's Poor Man's Dobro

Posted by Steve Bookout on July 18, 2021 at 2:04pm 3 Comments

Get your groove on for free

Posted by François on July 13, 2021 at 3:05pm 1 Comment

Latest Activity

Uncle John posted a video

Hobo’s Lullaby

Woodie Guthrie Classic. 0ld 97 Guitar, Candy Tin Drum and vocals by The Lynas Boys
8 minutes ago
Uncle John commented on Rope Walker Country Star's video

Song For Dave Lynas

"PS:  I was wondering what song I would play for Dave.  Right now, I don't…"
14 minutes ago
Uncle John commented on Rope Walker Country Star's video

Song For Dave Lynas

"Good tribute and play, Rope.  Dave would have appreciated it. Heck maybe he is now or someday…"
16 minutes ago
Uncle John replied to Uncle John's discussion Dave Lynas needs prayer and good thoughts and wishes
"Dave blasting off into the great unknown on Friday morning, 9/17/21"
21 minutes ago
Uncle John commented on Jerry Jordan's photo
24 minutes ago
Uncle John posted photos
30 minutes ago
T-Gripped replied to Uncle John's discussion Dave Lynas needs prayer and good thoughts and wishes
"Sorry to learn of Dave's passing. Thanks for keeping us updated UJ. My sincere condolences to…"
30 minutes ago
Bob "Ambrose" Negus commented on Randy S. Bretz's photo
1 hour ago
Bob "Ambrose" Negus liked Poorness Studios's video
1 hour ago
Rope Walker Country Star posted a video

Song For Dave Lynas

A song I’ve been playin’ since I heard Dave was ill. It’s not how I usually play. I don’t/can’t play like Dave. I don’t play slide. But I loved watching Dave...
1 hour ago
Jerry Jordan posted a photo

Dave Lynas immigrant suitcase

Rest In Peace Brother, see you at Califest, love you forever and always
2 hours ago
Jerry Jordan replied to Uncle John's discussion Dave Lynas needs prayer and good thoughts and wishes
"R.I.P friend, you touched my heart with all you did. We will miss you. Our thoughts and prayers…"
2 hours ago


© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->