VIDEO FEATURE: Building a micro shop for the work area challenged - Cigar Box Nation2024-03-29T14:47:16Zhttps://www.cigarboxnation.com/forum/topics/building-a-micro-shop-for-the-work-area-challenged?commentId=2592684%3AComment%3A3445955&feed=yes&xn_auth=noThis article will be the head…tag:www.cigarboxnation.com,2020-02-21:2592684:Comment:34473362020-02-21T15:43:32.409ZCigar Box Nationhttps://www.cigarboxnation.com/profile/MotherLeeds
<p>This article will be the headline feature for today's email blast, too! </p>
<p>This article will be the headline feature for today's email blast, too! </p> Thank you Shane, I've watched…tag:www.cigarboxnation.com,2020-02-21:2592684:Comment:34472192020-02-21T15:33:19.848ZKOOL DOG HOOCHhttps://www.cigarboxnation.com/profile/WillBonner
<p>Thank you Shane, I've watched lots of videos searching for guidance of a multiple use work area for a limited storage area and this fit the bill.</p>
<p>Thank you Shane, I've watched lots of videos searching for guidance of a multiple use work area for a limited storage area and this fit the bill.</p> Great find, Kool Dog! I've e…tag:www.cigarboxnation.com,2020-02-21:2592684:Comment:34473292020-02-21T15:20:58.297ZCigar Box Nationhttps://www.cigarboxnation.com/profile/MotherLeeds
<p>Great find, Kool Dog! I've edited your post so that the videos are shown in here. Your article has also been chosen to be part of Cigar Box Nation's FEATURES tab. </p>
<p>Thank you for great content!</p>
<p>Shane</p>
<p>Great find, Kool Dog! I've edited your post so that the videos are shown in here. Your article has also been chosen to be part of Cigar Box Nation's FEATURES tab. </p>
<p>Thank you for great content!</p>
<p>Shane</p> What a monster! What does the…tag:www.cigarboxnation.com,2020-02-21:2592684:Comment:34471232020-02-21T04:27:01.248ZKOOL DOG HOOCHhttps://www.cigarboxnation.com/profile/WillBonner
<p>What a monster! What does the that weigh 300lbs? I wouldn't have storage or the ability to haul it In and out to use it. Harbor freight has a belt disk sander for $64 that I've been eyeballing, but I'm also weighing options like "do I need it that bad? Would a hand plane do a better job or some other tool? Do I really have space for it?" These are questions I have to answer first. Although I just bought it, with the saw setup in the microbench I'll sell my tablesaw if I can't say yes to all…</p>
<p>What a monster! What does the that weigh 300lbs? I wouldn't have storage or the ability to haul it In and out to use it. Harbor freight has a belt disk sander for $64 that I've been eyeballing, but I'm also weighing options like "do I need it that bad? Would a hand plane do a better job or some other tool? Do I really have space for it?" These are questions I have to answer first. Although I just bought it, with the saw setup in the microbench I'll sell my tablesaw if I can't say yes to all those questions.</p> Hi Hooch, ha ha, it was in th…tag:www.cigarboxnation.com,2020-02-21:2592684:Comment:34471222020-02-21T04:00:48.541ZTaffy Evanshttps://www.cigarboxnation.com/profile/TaffyEvans
<p>Hi Hooch, ha ha, it was in the yard of a place I worked at, not being used, big old cast iron type of machine. I had to get it spinning by hand before I switched it on otherwise it would blow fuses. I did get narrower blades for it.</p>
<p>And down the track I converted it to a plunge router. See photo below.</p>
<p>That disc sander [called a belt sander?] posted on here is a bit too small for all that effort, I think. Looks good though. Mine was built the same way, only I had the shaft…</p>
<p>Hi Hooch, ha ha, it was in the yard of a place I worked at, not being used, big old cast iron type of machine. I had to get it spinning by hand before I switched it on otherwise it would blow fuses. I did get narrower blades for it.</p>
<p>And down the track I converted it to a plunge router. See photo below.</p>
<p>That disc sander [called a belt sander?] posted on here is a bit too small for all that effort, I think. Looks good though. Mine was built the same way, only I had the shaft facing front with a 6" pully on the shaft, I then bolted a 10" wooden disc to the aluminium pully. I also put a shroud around the disc to redirect dust. </p>
<p>Router sitting in new workshop a few years later</p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/3881551813?profile=original" target="_blank" rel="noopener"><img class="align-center" src="https://storage.ning.com/topology/rest/1.0/file/get/3881551813?profile=RESIZE_710x"/></a></p> Lol That means I'd have to dr…tag:www.cigarboxnation.com,2020-02-21:2592684:Comment:34470592020-02-21T01:40:33.948ZKOOL DOG HOOCHhttps://www.cigarboxnation.com/profile/WillBonner
<p>Lol That means I'd have to drag the washer outside and do a load of laundry while running the sander. I found a motor with a pulley, just can't do anything until after I build a bench.</p>
<p>Lol That means I'd have to drag the washer outside and do a load of laundry while running the sander. I found a motor with a pulley, just can't do anything until after I build a bench.</p> could run a pony belt off the…tag:www.cigarboxnation.com,2020-02-21:2592684:Comment:34471122020-02-21T00:48:33.906ZDoug Krantzhttps://www.cigarboxnation.com/profile/DougKrantz
<p>could run a pony belt off the washer to power the sander</p>
<p></p>
<p></p>
<p>could run a pony belt off the washer to power the sander</p>
<p></p>
<p></p> 36" cut with a 2" blade! What…tag:www.cigarboxnation.com,2020-02-21:2592684:Comment:34470562020-02-21T00:27:12.970ZKOOL DOG HOOCHhttps://www.cigarboxnation.com/profile/WillBonner
<p>36" cut with a 2" blade! What did you do start a saw mill?</p>
<p>36" cut with a 2" blade! What did you do start a saw mill?</p> I started making one of these…tag:www.cigarboxnation.com,2020-02-21:2592684:Comment:34471102020-02-21T00:20:38.186ZKOOL DOG HOOCHhttps://www.cigarboxnation.com/profile/WillBonner
<p>I started making one of these but ran into a major snag half way into the build. The wife got pissed and made me put the washing machine back together.</p>
<p>I started making one of these but ran into a major snag half way into the build. The wife got pissed and made me put the washing machine back together.</p> https://www.youtube.com/watch…tag:www.cigarboxnation.com,2020-02-20:2592684:Comment:34473022020-02-20T22:43:19.712ZDoug Krantzhttps://www.cigarboxnation.com/profile/DougKrantz
<p><a rel="nofollow noopener" href="https://www.youtube.com/watch?v=KaojkUzeEJU" target="_blank">https://www.youtube.com/watch?v=KaojkUzeEJU</a></p>
<h1 class="title style-scope ytd-video-primary-info-renderer">Make a Belt sander @Washing machine motor</h1>
<p><a rel="nofollow noopener" href="https://www.youtube.com/watch?v=KaojkUzeEJU" target="_blank">https://www.youtube.com/watch?v=KaojkUzeEJU</a></p>
<h1 class="title style-scope ytd-video-primary-info-renderer">Make a Belt sander @Washing machine motor</h1>