What are the pros and cons of a bolt on neck. Other than being able to change the neck angle. Are they worth the effort?

Views: 741

Reply to This

Replies to This Discussion

I like doing bolt on necks. As long as your neck pocket is nice and tight, you get awesome results. You can also easily raise the stack height increasing the break angle on your bridge. It also makes mounting electric pickups very easy since you have more room in the box.

I'm interested in acoustic CBGs only and experimenting a lot with the same Partagas boxes, to find out, which constructions sound better than others. I have two CBGs of identical boxes with identical sound holes, one neck through and one neck on top, both with the neck not touching the soundboard. There is a noticeable difference between the two: the neck on top variant is louder and richer in tone.

From other experiments I know that not only the sound board but also the vibrating bottom of the box is essential for sound. I suspect that anything that fills the space within the box will have some negative impact on sound.

So thumbs up for the bolt on solution if the box allows this construction and if it's realizable without another negative impact on sound.

Adjusting the neck angle is another topic, realizable with both construction variants; for adjustable neck through boxes see http://banjobridge.com/br-04a.htm how this is realized in an elder Framus banjo, scroll down to see a photo.

Moritz,

I too, like the neck on the box top.  The sound is loader and richer.  Do you have a pic of the top mount, not touching the soundboard?

thanks

Tim

mmmm turn head not easy....speek like hulk..... but jumpstart car goooooood!

As far as made for sliding CBGs go I don't really see any advantage. For those of us picky players who like our strings as low as they will go then yes. Being about to adjust the angle of the neck is important. But the average CBG and player really would't benefit from a bolt on neck. The only bolt on neck i have is my Cosmic Glider. To be truthful I grab one of the neck through cigar boxes when I want to play. Haven't played the Cosmic Glider in months. 

Now if your traveling a lot with them then yes. Bolt on necks would make packing them easier. Just put em back together when you get to where your going. 

Hi, I'm in the bolt/screw on neck camp. All my CBGs that I have built have either bolt or screwed on necks. Even the neck through models are bolted. This means of course they are easily adjustable and/or removable.
This means that action height can be set to better meet the customers needs. My cbg's are built for slide, but are easily adaptable for chord playing if neaded by the customer.
All my regular guitars have had bolted necks for some years. I don't find the bolt on method any extra work, and it is far easier if adjustments are needed down the track.
Cheers Taff

Are you making them bolt-on (cutting them down) or buying them ready to bolt? If the latter, where can I get them? Thanks.

Cbgitty 

Didn't see the bolt-on .... let me check again. Thanks Brian!

Gotta read Craig ( been a long Monday -

All my cbg's have been bolt on, or bolt in in the case of through necks, if you allow scope for adjustment, it really gives you a lot more options when you have playability issues

Biggest pro. It's a cigar box. The neck will outlast the box. Got a good neck. Boult it on a box. When that box goes wanky toss and replace. Still have a good neck. Now with a good box. 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Piezo disc under fretboard

Started by Will "KOOL DOG HOOCH" Bonner in Other stuff - off topic, fun stuff, whatever. Last reply by Paul Craig 12 hours ago. 19 Replies

VIDEO: Ben "Gitty" Baker - "The Band Played Walzing Matilda"

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by dUTCH wIGMAN yesterday. 12 Replies

Bento Box peek

Started by Christopher G Daniels in Building Secrets, Tips, Advice, Discussion. Last reply by BrianQ. on Thursday. 2 Replies

Equalizer preamp

Started by Will "KOOL DOG HOOCH" Bonner in Other stuff - off topic, fun stuff, whatever. Last reply by Will "KOOL DOG HOOCH" Bonner May 20. 9 Replies

Yamaha yg15 schematic needed

Started by Will "KOOL DOG HOOCH" Bonner in Other stuff - off topic, fun stuff, whatever. Last reply by Paul Craig May 19. 27 Replies

Pan for a resonator

Started by Will "KOOL DOG HOOCH" Bonner in Other stuff - off topic, fun stuff, whatever. Last reply by Paul Craig May 17. 8 Replies

Blog Posts

Cheesecake Banjolele

Posted by James Matthews on May 21, 2019 at 7:14pm 3 Comments

Latest build

Posted by Sean Murphy on May 8, 2019 at 9:03pm 4 Comments

Netherlands Tour

Posted by Dar Stellabotta on May 8, 2019 at 5:33pm 0 Comments

Latest Activity

Gary Stenzel liked Daniel Hulbert's video
5 minutes ago
Taffy Evans posted a discussion

Sawing very narrow strips on a table saw.

Hi, in the current thread "making your own picks" there was some discussion regarding the cutting…See More
1 hour ago
Poorness Studios liked BeetleJuice!'s video
2 hours ago
Poorness Studios liked Dirk's photo
2 hours ago
Scott Schoepf liked Uncle John's photo
3 hours ago
Joe Nanzer posted a status
"New artwork done to my 14th build!!!"
5 hours ago
Joe Nanzer posted photos
5 hours ago
BeetleJuice! posted a photo

You'll never own a rare work of art unless your a little impulsive

---------------------Do you collect or play cigar box guitars? Add a Red Dog to you collection, you…
5 hours ago
BeetleJuice! commented on BeetleJuice!'s video
Thumbnail

3 String Fighter -ACE- Normandy Blues Recording

"I do remember him well Dave......we use to call him "Lightening Lynas" .....he was…"
5 hours ago
BeetleJuice! commented on BeetleJuice!'s video
Thumbnail

3 String Fighter -ACE- Normandy Blues Recording

"I do remember him well Dave....he was my wingman on many important missions!"
5 hours ago
Uncle John commented on Lonman's photo
Thumbnail

What type of wood is this?

"Looks related to mahogany."
6 hours ago
Uncle John commented on Lonman's photo
6 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->