Has anyone got any tips on cutting out sound holes in biscuit tin tops ....

Views: 1099

Reply to This

Replies to This Discussion

After ruining several, I've come up with a technique that seems to work.

1. cover affected area with masking tape on both sides (easier to mark and the bit doesn't slip)

2. mark and dimple the center of the hole with a nail or punch

3. drill small hole (1/4" or less) The smaller the hole, the less tendency to tear out the flimsy metal

4. use conical "burr" bit to expand small hole to desired size--essentially filing away the metal all the way around

5. for multiple holes of same size, put tape around the cone bit partway up from the tip so you hit the tape just as the hole gets big enough

Make the hole in a scrap of sheet metal (perhaps part of a tin you screwed up previously) which is only barely larger than the hole, perhaps a quarter to half inch bigger all around.
Position this on the inside of the cookie tin lid right where you want the hole and temporarily tape it down.
Cut a hole through the lid in the center of the desired soundhole with a small grinding wheel in a dremel and work your way around the sound hole folding the lid in and around the template, which will be clamped inside and become part of the lid. You'll need to grind a few slots right up to the holes edge at corners and the like in order to comply with the shape you've made, but nearly all of the edge should be a rounded over fold rather than a sharp thin edge.

I don't bother 

I use a no cut method leaving a sound hole beside the neck. This works best on square tins and not so good on round ones.

See how I do it in this instructable. 

http://m.instructables.com/id/Ford-mini-glovebox-guitarukulele/

The best way to make a hole is to use a Chassis punch, but they're not cheap.


A step drill does a great job on sheet metal... HF has a pair up to 1-5/8" 

http://www.harborfreight.com/2-piece-titanium-nitride-coated-high-s...

HF also has a knockout punch set that should work.  $25... several sizes up to 1-1/4

http://www.harborfreight.com/knockout-punch-kit-91201.html

bullet holes would look cool...

Haven't used a chassis punch since aluminum chassis caught on in the 1950s. Wondered where I could get one. The HF knockout punch looks like a similar arrangement. Gotta' give 'em a visit...

I like your idea to use the melamine chopstick for the nut. 

you'll need support for cutting sound holes.

I put a piece of wood underneath where I'm about to drill or cut a hole.

never had a problem using this method.

I back the can with a wood block and pound a nail through.  Without any backing I use a step drill to drill it out to the size I want.  The drill rounds the sharp edges down into the can.  Most of the time I put the holes on the sides of the can so it won't mess up the nice picture on the top.

I bought a Step Drill Bit 6mm to 30mm and quite pleased the clean hole it cut ?  I'm going to glue the grommet's over the holes to finish it off ...  and thanks for all the reply's ...

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
5 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
5 hours ago
BrianQ. commented on Dar Stellabotta's video
9 hours ago
BrianQ. liked Dar Stellabotta's video
9 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
12 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
12 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
13 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
13 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
15 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
15 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
16 hours ago
A.D.EKER commented on Ricky D's photo
16 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->