I'm currently building my first cigar box guitar, in fact it's pretty much finished . One of the last things I need to do is install the piezo. I've noticed that everyone seems to use a hot glue gun to mount it, but I don't have one. Is there any alternative? Can I use wood or super glue instead ?

Views: 311

Reply to This

Replies to This Discussion

Thanks. From what I've seen folks are using the hot glue to pretty much encase or insulate the piezo so it only draws sound from one source or directon. I have actually considered taping it in place just to see how it sounds. I can always glue it in later if I feel it needs to be more isolated. Hope to post some pics of it later.

  Hi Austin,

                You're right about taping it in place to find the sweet spot. Some folks put it behind the bridge on the bass string side to give it more low end when the high string is too bright. Some put it in front of the bridge on the bass side for more mids. And on the high string side if too low end. Two piezos wired in series (-  +- +) and placed on both sides can give a fuller sound too. Underbridge rod piezos are the ultimate but disc piezos have their own advantages.

      You can wrap it in electrical tape and doublestick tape or hot glue it in. Silicone caulk works good with a two day dry time.. 3M Marine sealant 5200 is a mistake I learned twice...; )

Thanks for the advice Jim. It does seem to be missing some low end when I play it acoustically, so I'll keep what you said in mind. May try it out in a few spots just to see what difference it makes. Never thought of using caulk, that's a good idea! Hope to post some pics of it later today.

When I run out of glue sticks I use RTV or Shoe Goo.,,.I use a drop of wood glue to tack the disk to the box, then add the shoe goo.,.,dries overnight.,.,.,I suspect duct tape would work.,.,wrap in leather or cardboard or thin pieces of wood and use wood glue.,.,

options.,.,.,

Actually I just put it on the inside of the lid (under the bridge on the bass side seemed to be the best sounding spot) and stuck a piece of duct tape over it. Is there any disadvantage to doing this? Because actually it sounds pretty good.  

The disadvantage is you used the last of the duct tape.,.. lol

Lol Jerry, no actually I have about half a roll left. Camo pattern Gorilla tape,  pretty tuff stuff.

For the best placement I put my bottle capped piezo unreel the through neck in bridge position I find this is the best for the sound and keeps the noise from out side sauces to a minimum I use hot glue or 5 minute Arildite incassing the piezo in a bottle cap is a great way to get the best out of the piezo some will say they don’t but I’ve been using this method for the last 25 builds never a problem with the issues raised before , hot glue guns are cheap I’d advise to buy one anyway just my 2 cents worth of info hope it helps .

Thank you,  I'm seeking all the advice I can get at this point. You encase the piezo in a metal bottlecap I take it? The piezo I have wouldn't fit inside a standard bottlecap.  When I built mine I followed Glenn Watt's advice and created about an 1/8 inch gap between the neck and the inside of the lid to allow the lid to vibrate. That's where I placed the piezo ,in that gap under the bridge more towards the bass side. Seems to sound pretty good but I'm no expert. I realize hot glue guns are cheap, but things are tight for me right now. I plan to pick one up asap.  If you saw the tools I used to build this one you would laugh. Luckily I'm pretty resourceful and had some stuff such as tuners already lying around. I have less than  $18 in this build and most of that was the box and poplar 1×2 for the neck.

great looking build are made with a small amount of instruments, sometimes not even power instruments. 

Hi, I myself would be a bit suspect of ductape maintaining a good firm contact of the disc to timber, especially over a period of time, I'd hate to have to get back in the box at a later date due to the sound deteriating.

you could use the double sided adhesive sheet used for applying pickgaurds, I do in my CBG's, you would fit dozens of discs from one sheet. 

The manufacturer of the piezos I use recommend superglue gel to get the best response from their piezo pickups.  

Taff

RSS

The Essential Pages

New to Cigar Box Nation?How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

digital tuner

Started by Brent Kasl in Performances, How to Play, Lessons, Concerts. Last reply by Titch the Clown 8 hours ago. 8 Replies

What's on your workbench?

Started by Paul Craig in Other stuff - off topic, fun stuff, whatever. Last reply by Cause the Blue rat 20 hours ago. 691 Replies

Cbg snare

Started by Matt Schaller in Building Secrets, Tips, Advice, Discussion. Last reply by Cause the Blue rat on Saturday. 8 Replies

fret cutting jig

Started by Alan Dillard in Building Secrets, Tips, Advice, Discussion. Last reply by steve hale on Saturday. 3 Replies

The first sale

Started by Blues Frog in Performances, How to Play, Lessons, Concerts. Last reply by Blues Frog on Wednesday. 4 Replies

Tap Tuning

Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Cause the Blue rat on Wednesday. 6 Replies

Blog Posts

3. German CBG Festival

Posted by Markus Gaiser on September 16, 2018 at 3:42pm 1 Comment

..absolute authenticity!

Posted by billy jones bluez on August 18, 2018 at 10:30pm 0 Comments

Other woodwork

Posted by Tom E on August 16, 2018 at 5:00pm 4 Comments

kannel/ kantele (Baltic psaltery)

Posted by Tom E on August 16, 2018 at 1:00pm 4 Comments

Latest Activity

Uncle John commented on Miku's photo
Thumbnail

Guitar lamp / shell

"Very nice!   Nice art too!"
12 minutes ago
Uncle John commented on SlowHound's video
Thumbnail

Late Night

"Oooh.  That relaxed me.  And I needed it. Very nice.  Kind of like being by a…"
13 minutes ago
Hans replied to Cause the Blue rat's discussion Bob Dylan's 'Knocking on Heaven's Door'.
"I play G - D - Am / G - D - C / G - D - Am / G - D - C - D for the verse. And G - D - Am / G - D -C…"
13 minutes ago
George Ross liked Cory's photo
28 minutes ago
George Ross liked GARY THORNE's photo
29 minutes ago
George Ross liked Wade's photo
38 minutes ago
George Ross liked Cpt. Nemoff's photo
41 minutes ago
George Ross liked Eero Tapani Lehtinen's photo
43 minutes ago
George Ross liked Eero Tapani Lehtinen's photo
45 minutes ago
Cause the Blue rat replied to Cause the Blue rat's discussion Bob Dylan's 'Knocking on Heaven's Door'.
"Ya, even Dylan plays it differently. In the original recording it's four chords. Depending on…"
55 minutes ago
Casey Baron commented on Casey Baron's video
57 minutes ago
Denny commented on Casey Baron's video
Thumbnail

Jesus on the Mainline - Cover by Casey & Tyler Baron

"I never get tired of listenin to this!"
1 hour ago

Music

Loading…

© 2018   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service