I have got most of my components together. I'd like to know what some experienced members think about a timeline for putting this baby together. I have a box untouched, a raw neck cut to length with a scarf joint, a fretboard (pre-made) bridge with saddle and nut.

I know I'll probably do something in the wrong order, but would like to keep that to a minimum. Sound hole? neck block? bridge patch? tuner holes? Pretty sure gluing the fretboard will be toward the end.

Any help or suggestions would be most welcome.

Views: 202

Replies to This Discussion

Wow this depends on so many things - the tools you have, the way you plan to assemble, the box, tuners, etc.  I have not made a ton of builds and I try to do different types of construction each time so I always end up with something I should have done sooner or later. I'll toss out a couple things but they may or may not fit your situation. 

Sounds obvious but anything glued is basically permanent, screws can be undone. A box that can open after assembly is easier to tweak something.

Drill the sound hole anytime once you know it won't be in the way of a thru neck, brace, etc.  Definitely while it can be opened so a piece of scrap is under the top for support while drilling.

If you plan to fully round the neck into a D shape, it is easier to glue the fretboard while the neck is flat.  Just cover it in painters tape to keep it from getting marred.

If you have a premade fretboard, making the neck a little wide allows for matching the profile after gluing.

If you do the bridge last, it can be moved and adjusted for height and intonation.  Make the nut a little tall, it is easy to shorten, hard to lengthen.

Depending on your choice of finish, you may want to fully complete the neck before attaching it.  Tung oil or Tru oil can be sanded to tweak something and refinished seamlessly, stain and varnish not so much.

Follow some how-tos and see what order they did it.

 On the bass I just completed (not a uke but...)

 I glued in the neck support blocks early because i was bored and waiting for neck glue(laminated) to dry.

 Later I wanted to drill holes through the bottom for strings but the glued in block was in the way :(

 Definitely best to have all cuts made, holes drilled (maybe not sound hole as Kigar stated)

everything able to be placed and tested 'dry' before applying glue.

---

 I think it's a 1 on 1 basis though, every instrument could vary a little so it's good to have everything ready and laid out and just think about the things that will make it hard later.

Thanks for the ideas guys.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

Gitaulele

Started by Brown Water Jerry (Rice). Last reply by Kigar Mar 21, 2020. 1 Reply

Ukes For Gand kids

Started by Rupe Power. Last reply by Rupe Power Nov 16, 2017. 2 Replies

Semi-Uke Kit Build

Started by Brian Revels. Last reply by Brian Revels Oct 6, 2017. 8 Replies

ideal narrow of the box?

Started by jose garcia paredes. Last reply by Kigar Sep 3, 2017. 3 Replies

Steel string advice sought for a chronic head scratcher (me)

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Bob Johnston May 1, 2017. 10 Replies

(CB) U bass help

Started by Kigar. Last reply by Ronald Whitford Apr 6, 2017. 1 Reply

Cigar Box Ukulele group on Facebook

Started by Kentucky Mojo Jan 31, 2017. 0 Replies

Classical Ball end strings

Started by John Hopper Dec 30, 2016. 0 Replies

String choices: nylon vs. steel

Started by Lane Martin. Last reply by gary sheldon Dec 3, 2016. 5 Replies

MDF Box Ukes

Started by Scott W. Last reply by Kentucky Mojo Nov 4, 2016. 7 Replies

My Brothers Christmas Present

Started by George Fitzgibbon. Last reply by George Fitzgibbon Oct 26, 2016. 6 Replies

CBU Avo Uvezian Tenor Uke

Started by Kigar. Last reply by Greg Thompson Jul 8, 2016. 5 Replies

Triangular Concert Uke

Started by Kigar. Last reply by Greg Thompson Jul 8, 2016. 4 Replies

First Build

Started by B. Kirkwood. Last reply by B. Kirkwood Apr 13, 2016. 2 Replies

Assembly Order

Started by B. Kirkwood. Last reply by B. Kirkwood Mar 29, 2016. 3 Replies

Neck length

Started by B. Kirkwood. Last reply by gary sheldon Mar 29, 2016. 3 Replies

reversed tuners on a uke - advise wanted

Started by Kigar. Last reply by gary sheldon Feb 23, 2016. 3 Replies

New to Uke!!

Started by jeffrey ross. Last reply by Habanera Hal Feb 17, 2016. 19 Replies

Great little video!

Started by Wade. Last reply by rusty case Feb 8, 2016. 2 Replies

Fretboard attachment

Started by gary sheldon. Last reply by rusty case Feb 8, 2016. 3 Replies

Latest Activity

Keith Rearick liked Lark Leazar's discussion First build
2 minutes ago
BrianQ. left a comment for Frank Humphrey
"Welcome, check out the Resources tab for build info and join some groups located in the Posts tab?…"
39 minutes ago
BrianQ. left a comment for Enoch
"Welcome, check out the Resources tab for build info and join some groups located in the Posts tab?…"
39 minutes ago
BrianQ. left a comment for Rick Harris
"Welcome, check out the Resources tab for build info and join some groups located in the Posts tab?…"
41 minutes ago
Gary O'slide posted a video
1 hour ago
Carl Floyd liked Webster Miller's discussion New build with Tabak box
2 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

For What It's Worth: 3-String Cigar Box Guitar

"Thanks Uncle John! We will try to keep a smile on your face."
2 hours ago
Profile IconRick Harris, Enoch, Frank Humphrey and 5 more joined Cigar Box Nation
4 hours ago
Rich commented on Rich's photo
Thumbnail

Perdomo RTLCBG front view

"Thanks, UJ. See the heel photo for an explanation for that screw in the fret board."
4 hours ago
Rich commented on Rich's photo
Thumbnail

Perdomo RTLCBG head stock rear view

"Thanks, UJ.     Does anybody notice I turn the albums around to the back when I take a…"
4 hours ago
Rich commented on Rich's photo
Thumbnail

Perdomo RTLCBG whole

"Jerry- yes, this one that fits my hands very well. Uncle John - Thank you.  I always try to…"
4 hours ago
Rich commented on Rich's photo
Thumbnail

Perdomo RTLCBG heel

"Jerry,    The 'scarf joint' at the heel is a mistake and repair!   The…"
4 hours ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->