Anyone using bisected dowels for neck stock? - Cigar Box Nation2024-03-29T14:42:29Zhttps://www.cigarboxnation.com/forum/topics/anyone-using-bisected-dowels-for-neck-stock?commentId=2592684%3AComment%3A3057808&feed=yes&xn_auth=noBig ol' 1 string diddley bow…tag:www.cigarboxnation.com,2018-02-24:2592684:Comment:30594722018-02-24T04:57:26.539ZGrandpahttps://www.cigarboxnation.com/profile/Grandpa958
<p>Big ol' 1 string diddley bow neck.</p>
<p>Big ol' 1 string diddley bow neck.</p> That is GREAT advice and anyo…tag:www.cigarboxnation.com,2018-02-23:2592684:Comment:30593702018-02-23T21:32:56.095ZSlim Pickenshttps://www.cigarboxnation.com/profile/SlimPickens
<p>That is GREAT advice and anyone considering doing anything like this should definitely secure the material like a BOSS. I can just imagine the misery that would follow if you did not.</p>
<p>That is GREAT advice and anyone considering doing anything like this should definitely secure the material like a BOSS. I can just imagine the misery that would follow if you did not.</p> My 2 cents is be careful.,.,f…tag:www.cigarboxnation.com,2018-02-22:2592684:Comment:30585362018-02-22T20:41:05.689ZJerry Jordanhttps://www.cigarboxnation.com/profile/JerryJordan
<p>My 2 cents is be careful.,.,feeding a dowel to a table saw can be tricky.,,.I would mount it to a "carrier" board.,., and be careful.,.,.,I tried ripping a baseball bat without the "carrier" board and I'm lucky to still be typing.,.,but i'm sure it would work.,.,,</p>
<p>My 2 cents is be careful.,.,feeding a dowel to a table saw can be tricky.,,.I would mount it to a "carrier" board.,., and be careful.,.,.,I tried ripping a baseball bat without the "carrier" board and I'm lucky to still be typing.,.,but i'm sure it would work.,.,,</p> Why work so hard when someone…tag:www.cigarboxnation.com,2018-02-22:2592684:Comment:30584802018-02-22T19:58:40.756ZPaul Craighttps://www.cigarboxnation.com/profile/PaulCraig
<p>Why work so hard when someone else has done some of the work right? ;)</p>
<p>Why work so hard when someone else has done some of the work right? ;)</p> Fantastic!tag:www.cigarboxnation.com,2018-02-22:2592684:Comment:30585302018-02-22T19:57:00.975ZPaul Craighttps://www.cigarboxnation.com/profile/PaulCraig
<p>Fantastic!</p>
<p>Fantastic!</p> Nice. Yeah, I would need to f…tag:www.cigarboxnation.com,2018-02-22:2592684:Comment:30579122018-02-22T02:00:02.431ZSlim Pickenshttps://www.cigarboxnation.com/profile/SlimPickens
<p>Nice. Yeah, I would need to find a table saw for this but then again my wallets getting heavy and my arms are getting tired. Keep us posted if you get into it!</p>
<p>Nice. Yeah, I would need to find a table saw for this but then again my wallets getting heavy and my arms are getting tired. Keep us posted if you get into it!</p> When I first started thinking…tag:www.cigarboxnation.com,2018-02-22:2592684:Comment:30578392018-02-22T01:58:03.316ZSlim Pickenshttps://www.cigarboxnation.com/profile/SlimPickens
<p>When I first started thinking of building I thought about Large tool handles ripped in half and then further shaped, Mostly because if done correctly it would unique and allow my ever loving laziness to persist. </p>
<p>When I first started thinking of building I thought about Large tool handles ripped in half and then further shaped, Mostly because if done correctly it would unique and allow my ever loving laziness to persist. </p> They were remodeling a recove…tag:www.cigarboxnation.com,2018-02-22:2592684:Comment:30576732018-02-22T01:12:22.085Z3qt17g550yh6rhttps://www.cigarboxnation.com/xn/detail/u_3qt17g550yh6r
<p>They were remodeling a recovery home and I drove by. The workers had pulled off all the hand rails (maple) and had threw them in the dumpster. I asked if I could have them. My garage has a pile of maple and cherry 1 1/2 hand rail. I just flattened it on the jointer and it is big enough for a 3 string. There is a flat side to it so it wasn't too bad</p>
<p>They were remodeling a recovery home and I drove by. The workers had pulled off all the hand rails (maple) and had threw them in the dumpster. I asked if I could have them. My garage has a pile of maple and cherry 1 1/2 hand rail. I just flattened it on the jointer and it is big enough for a 3 string. There is a flat side to it so it wasn't too bad</p> To do the scarf joint I would…tag:www.cigarboxnation.com,2018-02-22:2592684:Comment:30577432018-02-22T01:08:31.956Z3qt17g550yh6rhttps://www.cigarboxnation.com/xn/detail/u_3qt17g550yh6r
<p>To do the scarf joint I would cut the dowel then take a 1/4 and scarf it and glue the two together. </p>
<p>To do the scarf joint I would cut the dowel then take a 1/4 and scarf it and glue the two together. </p> Depends on what wood type the…tag:www.cigarboxnation.com,2018-02-21:2592684:Comment:30578082018-02-21T23:54:01.505ZPaul Craighttps://www.cigarboxnation.com/profile/PaulCraig
<p>Depends on what wood type the dowel is made of will determine if a trussrod is needed. Example - Soft Pine</p>
<p>Sledge Hammer Handles would be great being most are made of Hickory.</p>
<p>Depends on what wood type the dowel is made of will determine if a trussrod is needed. Example - Soft Pine</p>
<p>Sledge Hammer Handles would be great being most are made of Hickory.</p>