So I was looking at a friends shop the other day and I find this 2" dowel. Just looking at it it seems like if you ripped it long ways it might make a nice strong CBG neck. 

I figure I must be missing something. Did anyone try anything like this?

Views: 487

Reply to This

Replies to This Discussion

I'd say go for it, part of the fun is to see what happens. But a couple things come to mind - a 1x2 rectangle even with well rounded edges will be stiffer than a half circle. It would also depend on if it was hardwood or not. Also the headstock will be interesting!

Thanks for the reply. Here I was thinking I was all smart with the idea that a half circle would be stronger than the rectangle. But then even if it was it would only be in the direction of the uncut radius and so probably not the great cigar box revolution.

Going to back burner it though I think I'll try to make it later with an inlaid fretboard. Maybe headless put the tuners on the bottom.

Still could be a revolution. I'm stuck trying to visualize a scarf joint with the dowel, but the tuners on the bottom would definitely work. 

To do the scarf joint I would cut the dowel then take a 1/4 and scarf it and glue the two together. 

Go for it, commercial guitars have necks shaped into a half circle cross-section (well really close)

I haven't cut a dowel, but I did use a 3/4 round pine stair-railing piece for a neck on one of my builds.  Gives new meaning to "baseball bat" neck, but it fits nicely in my hand and plays just fine.  Hasn't bowed one bit under three-string tension, although it has only been about 4 months since it was strung up.  Cutting the headstock WAS a challenge I wasn't pleased with the result - but going headless is a great idea.  I agree with Kigar and JL... just go for it.              

Depends on what wood type the dowel is made of will determine if a trussrod is needed. Example - Soft Pine

Sledge Hammer Handles would be great being  most are made of Hickory.

When I first started thinking of building I thought about Large tool handles ripped in half and then further shaped, Mostly because if done correctly it would unique and allow my ever loving laziness to persist. 

Why work so hard when someone else has done some of the work right? ;)

They were remodeling a recovery home and I drove by. The workers had pulled off all the hand rails (maple) and had threw them in the dumpster. I asked if I could have them. My garage has a pile of maple and cherry 1 1/2 hand rail. I just flattened it on the jointer and it is big enough for a 3 string. There is a flat side to it so it wasn't too bad

Nice. Yeah, I would need to find a table saw for this but then again my wallets getting heavy and my arms are getting tired. Keep us posted if you get into it!



The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Cigar Box Amp Mods

Started by Cigar Box Nation in Feature Articles. Last reply by RTZGUITARS on Friday. 14 Replies

Blog Posts

Mr. Bells

Posted by Stephen Cohen on September 4, 2021 at 12:30pm 0 Comments

Bookie's Poor Man's Dobro

Posted by Steve Bookout on July 18, 2021 at 2:04pm 3 Comments

Get your groove on for free

Posted by François on July 13, 2021 at 3:05pm 1 Comment

Latest Activity

Jerry Jordan posted a photo


3 3 strings from St Wishnevsky
6 minutes ago
the anonymous pick commented on CLG's photo


"pretty slick bud ."
39 minutes ago
Jim Morris liked Cigar Box Blues's discussion - Memorial for Dave Lynas -
57 minutes ago
Rope Walker Country Star liked Cigar Box Blues's discussion - Memorial for Dave Lynas -
1 hour ago
James Pobog posted a discussion

Starting to plan for....

...a baritone CBG. I have a big square thin box like Shane's and I'm going to try making another…See More
1 hour ago
sid posted a photo

nat-sherman-1930--my 6th guitar

i have built 6 and this one is my first real cigar box guitar sitting on the fender of my 39…
2 hours ago
Fantacone Box Works posted a photo
2 hours ago
Jim Morris commented on Poorness Studios's video
2 hours ago
Jim Morris commented on Downtown Vinnie's video

I Shall Be Released

"Mighty fine Vinnie."
2 hours ago
Jim Morris commented on Cigar Box Blues's video
2 hours ago
Jim Morris commented on Jim Morris's video

For Dave

"Thanks to all for your comments and for honoring our friend. To my friend RTZ I decided social…"
3 hours ago
Darryl Tuttle left a comment for chris bugg
"Welcome to CBN,,looking forward to seeing pics of your guitars"
3 hours ago


© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->