So I was looking at a friends shop the other day and I find this 2" dowel. Just looking at it it seems like if you ripped it long ways it might make a nice strong CBG neck. 

I figure I must be missing something. Did anyone try anything like this?

Views: 487

Reply to This

Replies to This Discussion

I'd say go for it, part of the fun is to see what happens. But a couple things come to mind - a 1x2 rectangle even with well rounded edges will be stiffer than a half circle. It would also depend on if it was hardwood or not. Also the headstock will be interesting!

Thanks for the reply. Here I was thinking I was all smart with the idea that a half circle would be stronger than the rectangle. But then even if it was it would only be in the direction of the uncut radius and so probably not the great cigar box revolution.

Going to back burner it though I think I'll try to make it later with an inlaid fretboard. Maybe headless put the tuners on the bottom.

Still could be a revolution. I'm stuck trying to visualize a scarf joint with the dowel, but the tuners on the bottom would definitely work. 

To do the scarf joint I would cut the dowel then take a 1/4 and scarf it and glue the two together. 

Go for it, commercial guitars have necks shaped into a half circle cross-section (well really close)

I haven't cut a dowel, but I did use a 3/4 round pine stair-railing piece for a neck on one of my builds.  Gives new meaning to "baseball bat" neck, but it fits nicely in my hand and plays just fine.  Hasn't bowed one bit under three-string tension, although it has only been about 4 months since it was strung up.  Cutting the headstock WAS a challenge I wasn't pleased with the result - but going headless is a great idea.  I agree with Kigar and JL... just go for it.              

Depends on what wood type the dowel is made of will determine if a trussrod is needed. Example - Soft Pine

Sledge Hammer Handles would be great being  most are made of Hickory.

When I first started thinking of building I thought about Large tool handles ripped in half and then further shaped, Mostly because if done correctly it would unique and allow my ever loving laziness to persist. 

Why work so hard when someone else has done some of the work right? ;)

They were remodeling a recovery home and I drove by. The workers had pulled off all the hand rails (maple) and had threw them in the dumpster. I asked if I could have them. My garage has a pile of maple and cherry 1 1/2 hand rail. I just flattened it on the jointer and it is big enough for a 3 string. There is a flat side to it so it wasn't too bad

Nice. Yeah, I would need to find a table saw for this but then again my wallets getting heavy and my arms are getting tired. Keep us posted if you get into it!

Fantastic!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor


Recommended Links & Resources


Forum

Cigar Box Amp Mods

Started by Cigar Box Nation in Feature Articles. Last reply by RTZGUITARS yesterday. 14 Replies

Blog Posts

Mr. Bells

Posted by Stephen Cohen on September 4, 2021 at 12:30pm 0 Comments

Bookie's Poor Man's Dobro

Posted by Steve Bookout on July 18, 2021 at 2:04pm 3 Comments

Get your groove on for free

Posted by François on July 13, 2021 at 3:05pm 1 Comment

Latest Activity

Keith Rearick liked Downtown Vinnie's video
3 minutes ago
Keith Rearick commented on Jim Morris's video
Thumbnail

For Dave

"Good one Jim. Got in church this morning, sat down, and thought of Dave, and said a prayer for him,…"
4 minutes ago
Keith Rearick liked Jim Morris's video
10 minutes ago
Keith Rearick liked Poorness Studios's photo
14 minutes ago
Keith Rearick liked CLG's photo
15 minutes ago
Keith Rearick liked CLG's photo
15 minutes ago
Keith Rearick liked CLG's photo
16 minutes ago
Keith Rearick liked CLG's photo
16 minutes ago
CLG posted photos
1 hour ago
Doug Thorsvik posted a video

Beer Barrel Polka: 3-string (G1G2D3) Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 73rd Zoom Mtg Sep 13, 2021. More info and free songbooks: https://sites.google.com/site/cigarboxguitarslingersspokane/home
1 hour ago
bemuzic commented on bemuzic's video
Thumbnail

Busking, St Ives w 3 String Cigar Box Guitar - Magic Paints, with dancing children :-)

"thanks Brian and Doug, yep a few good minutes of connecting with people through music  and…"
1 hour ago
Doug Thorsvik commented on bemuzic's video
Thumbnail

Busking, St Ives w 3 String Cigar Box Guitar - Magic Paints, with dancing children :-)

"It’s always fun to see children respond to music. So unselfconscious and authentic. Thanks…"
1 hour ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->