I wonder what people think about putting the volume knob on the top side of the box rather than through the lid. Seems like the knob can get in the way when strumming, especially with a smaller box. Most people seem to put the knobs on the lid, in the corner near the bridge.

related question: if the side or the lid is too thick for the potentiometer shaft length, is it better to remove some material to thin the wood, or just buy a pot with a longer shaft?

Views: 213

Reply to This

Replies to This Discussion

I have seen knobs on the upper left corner(RH guitar) by the neck. As far as thickness goes either option works. There are builders who have 4 band equalizer on the side, no reason not having knobs there also. Number one rule for CBG's "There are no rules"!

Hi Michael, I've pt the knobs both on the lid and on the top. It's just a matter of YOUR preference. No rules in cbg building.
As to the second question. I make a thin face plate for the knobs and Jack. I then cut a hole in my cbg slightly smaller than the face plate, so i can mount knobs to face plate, run my wires, then i mount the face plate , with per attached knobs over that hole in the thick cbg wall or lid (wherever your'e mounting) .
Hope this helps.
Rock on,
Poor Steve

Thanks. Yes, I thought about using a plate.

Meh .,,, put em anywhere  ;-)

I always want to do it different, but you take the prize!

That's different!

That's definitely new to me.
You have a cable running the length of the neck on the top of it?

yeah,  it runs down the truss rod channel . since the jack is in the head too. ;-)  it's  glued in and   sunk flush . it just looks protruding in the pic .

That's wicked!
If at some point you can be bothered, I'd appreciate a picture of the instrument in full :)

Here's a vid .. there's some other weird stuff in there . lol . it's electric razor powered . ;-) 


Find more videos like this on Cigar Box Nation

One of a kind! I especially love the slide holster.
What are those two pegs protruding from the pickup area?

Pegs are from the horseshoe coil that was in the electric razor . i used the coil as a pickup ,  it seems to pick up between the poles , middle string is a bit quieter than the rest ,  but not too noticeable .

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Slide off decals

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion 18 minutes ago. 0 Replies

Break angle for bridge

Started by Fantacone Box Works in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner 56 minutes ago. 5 Replies

Day 1: Whiskey Tin Diddley Bass

Started by JP Lace Master in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner 1 hour ago. 3 Replies

Frets and fretboard

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion yesterday. 0 Replies

Fret Sides Dressing

Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by Fantacone Box Works yesterday. 6 Replies

Navigating this forum

Started by Fantacone Box Works in Performances, How to Play, Lessons, Concerts. Last reply by Fantacone Box Works on Sunday. 5 Replies

30.5" scale lay-out help needed please!

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner Jul 6. 15 Replies

Free Cigar Box Tablature Library

Started by Ben "C. B. Gitty" Baker in Performances, How to Play, Lessons, Concerts. Last reply by Brad Schoonmaker Jul 4. 12 Replies

Blog Posts

apology

Posted by Danny Gordon on July 13, 2019 at 7:30pm 3 Comments

Latest build

Posted by Sean Murphy on July 5, 2019 at 8:34am 5 Comments

A Tale of Two Ukes

Posted by Poorness Studios on June 25, 2019 at 10:00am 2 Comments

Latest Activity

Will "KOOL DOG HOOCH" Bonner posted a discussion

Slide off decals

Oh baby! As many of you well know I've been looking for volume knob decals for my builds. I was…See More
18 minutes ago
Dave Lynas liked Beetlejuice!'s video
27 minutes ago
Dave Lynas liked Uncle John's video
29 minutes ago
Dave Lynas liked Downtown Vinnie's video
29 minutes ago
Dave Lynas commented on Uncle John's video
Thumbnail

No CBG - Locomotive

"We have a Mallet (Malley) like that at The Depot railroad museum. They pulled iron ore from the…"
33 minutes ago
Clarky posted a video

Can't Stop - Red Hot Chili Peppers - Cigar Box Guitar Cover

ADGB tuning Gear used... 1. Cheap cigar box guitar 2. Boss Super Overdrive, Proco Rat 3. Roland Cube 40xl
38 minutes ago
Dave Lynas commented on Dave Lynas's video
Thumbnail

Squirrel’s Picnic

"Thanks Uncle John. We had Monday music at the lake yesterday. A beautiful day with great grilling…"
41 minutes ago
Will "KOOL DOG HOOCH" Bonner replied to Fantacone Box Works's discussion Break angle for bridge
"LOL Taff, isn't it past your bedtime down under? What if he was to make a tail piece? They…"
56 minutes ago
Taffy Evans replied to Fantacone Box Works's discussion Break angle for bridge
"Just a thought. If you was to use a fixed bridge or a movable bridge, would they not both sit in…"
1 hour ago
Will "KOOL DOG HOOCH" Bonner replied to JP Lace Master's discussion Day 1: Whiskey Tin Diddley Bass
"Thanks. I for some reason thought my buddy was building them wrong. For whatever reason his cans…"
1 hour ago
JP Lace Master replied to JP Lace Master's discussion Day 1: Whiskey Tin Diddley Bass
"The string goes through the bottom of the tin. everything is mounted to that tin in one way or…"
1 hour ago
Will "KOOL DOG HOOCH" Bonner replied to Fantacone Box Works's discussion Break angle for bridge
"Del Puckett has an excellent video on a back anglè on the neck ŵhich not only give you…"
1 hour ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->