I wonder what people think about putting the volume knob on the top side of the box rather than through the lid. Seems like the knob can get in the way when strumming, especially with a smaller box. Most people seem to put the knobs on the lid, in the corner near the bridge.

related question: if the side or the lid is too thick for the potentiometer shaft length, is it better to remove some material to thin the wood, or just buy a pot with a longer shaft?

Views: 214

Reply to This

Replies to This Discussion

I have seen knobs on the upper left corner(RH guitar) by the neck. As far as thickness goes either option works. There are builders who have 4 band equalizer on the side, no reason not having knobs there also. Number one rule for CBG's "There are no rules"!

Hi Michael, I've pt the knobs both on the lid and on the top. It's just a matter of YOUR preference. No rules in cbg building.
As to the second question. I make a thin face plate for the knobs and Jack. I then cut a hole in my cbg slightly smaller than the face plate, so i can mount knobs to face plate, run my wires, then i mount the face plate , with per attached knobs over that hole in the thick cbg wall or lid (wherever your'e mounting) .
Hope this helps.
Rock on,
Poor Steve

Thanks. Yes, I thought about using a plate.

Meh .,,, put em anywhere  ;-)

I always want to do it different, but you take the prize!

That's different!

That's definitely new to me.
You have a cable running the length of the neck on the top of it?

yeah,  it runs down the truss rod channel . since the jack is in the head too. ;-)  it's  glued in and   sunk flush . it just looks protruding in the pic .

That's wicked!
If at some point you can be bothered, I'd appreciate a picture of the instrument in full :)

Here's a vid .. there's some other weird stuff in there . lol . it's electric razor powered . ;-) 


Find more videos like this on Cigar Box Nation

One of a kind! I especially love the slide holster.
What are those two pegs protruding from the pickup area?

Pegs are from the horseshoe coil that was in the electric razor . i used the coil as a pickup ,  it seems to pick up between the poles , middle string is a bit quieter than the rest ,  but not too noticeable .

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Frets and fretboard

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner 15 hours ago. 4 Replies

Fret Sides Dressing

Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by Titch the Clown 17 hours ago. 8 Replies

Slide off decals

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner yesterday. 10 Replies

Perma grit sandpaper

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner yesterday. 2 Replies

30.5" scale lay-out help needed please!

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner yesterday. 20 Replies

Break angle for bridge

Started by Fantacone Box Works in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Thursday. 28 Replies

Navigating this forum

Started by Fantacone Box Works in Performances, How to Play, Lessons, Concerts. Last reply by Fantacone Box Works Jul 14. 5 Replies

Blog Posts

Getting ready for next build

Posted by Sean Murphy on July 17, 2019 at 12:54pm 1 Comment

What wood is this?

Posted by Sean Murphy on July 16, 2019 at 10:48am 7 Comments

apology

Posted by Danny Gordon on July 13, 2019 at 7:30pm 3 Comments

Latest Activity

Smokin' Guitars commented on Smokin' Guitars's photo
Thumbnail

Guitar rack

"I should have mentioned that the rack was a gift from my brother at Christmas. He found a few ideas…"
4 minutes ago
Darryl Tuttle commented on Smoothead's video
Thumbnail

One Step Away From The Blues

"Very good! Put a lot of work into this"
4 minutes ago
Smokin' Guitars commented on Smokin' Guitars's photo
Thumbnail

Guitar rack

"Build #10 The cohiba 4 string on the left is build #10. I bought a lot of 10 martin guitar…"
6 minutes ago
Uncle John commented on Clint Spotts's photo
Thumbnail

Tom Waits

"I like old Tom. Not a bad actor either."
7 minutes ago
Uncle John commented on Dave's photo
Thumbnail

Build #2 - pic 1

"Good on yer, Dave. Looks like a player. Go to page top under resources for 'how to play'…"
9 minutes ago
Metal hic posted a video

Irish tune (or britain?)

An old Irish (I believe) tune I played long time ago. This time, it's played on my new three strings guitar - the chanterelle is doubled Un vieil air Irlanda...
9 minutes ago
Uncle John commented on Smokin' Guitars's photo
Thumbnail

Guitar rack

"Very good!  I like a nice rack."
10 minutes ago
Metal hic posted a status
"Looks like I have troubles to upload video… her's the new one with the 3+1 strings https://www.youtube.com/watch?v=eNPsguvdMNM"
10 minutes ago
Smokin' Guitars posted a photo
11 minutes ago
Uncle John commented on BUGGY (C)'s video
11 minutes ago
Uncle John commented on Dave Lynas's video
Thumbnail

Mean Old Tooth Ache Blues

"Nice lilies.  Good toothsome tune.     Slim is sounding good!  …"
13 minutes ago
Uncle John commented on Road Rash Roy's video
Thumbnail

Upright Bass Build

"It sounds good and low bassy.  Looks like it would play okay.  I don't know how to…"
16 minutes ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->