I wonder what people think about putting the volume knob on the top side of the box rather than through the lid. Seems like the knob can get in the way when strumming, especially with a smaller box. Most people seem to put the knobs on the lid, in the corner near the bridge.

related question: if the side or the lid is too thick for the potentiometer shaft length, is it better to remove some material to thin the wood, or just buy a pot with a longer shaft?

Views: 215

Reply to This

Replies to This Discussion

I have seen knobs on the upper left corner(RH guitar) by the neck. As far as thickness goes either option works. There are builders who have 4 band equalizer on the side, no reason not having knobs there also. Number one rule for CBG's "There are no rules"!

Hi Michael, I've pt the knobs both on the lid and on the top. It's just a matter of YOUR preference. No rules in cbg building.
As to the second question. I make a thin face plate for the knobs and Jack. I then cut a hole in my cbg slightly smaller than the face plate, so i can mount knobs to face plate, run my wires, then i mount the face plate , with per attached knobs over that hole in the thick cbg wall or lid (wherever your'e mounting) .
Hope this helps.
Rock on,
Poor Steve

Thanks. Yes, I thought about using a plate.

Meh .,,, put em anywhere  ;-)

I always want to do it different, but you take the prize!

That's different!

That's definitely new to me.
You have a cable running the length of the neck on the top of it?

yeah,  it runs down the truss rod channel . since the jack is in the head too. ;-)  it's  glued in and   sunk flush . it just looks protruding in the pic .

That's wicked!
If at some point you can be bothered, I'd appreciate a picture of the instrument in full :)

Here's a vid .. there's some other weird stuff in there . lol . it's electric razor powered . ;-) 


Find more videos like this on Cigar Box Nation

One of a kind! I especially love the slide holster.
What are those two pegs protruding from the pickup area?

Pegs are from the horseshoe coil that was in the electric razor . i used the coil as a pickup ,  it seems to pick up between the poles , middle string is a bit quieter than the rest ,  but not too noticeable .

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

License Plate Buzzing

Started by Sincerely, Iris in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans 2 hours ago. 1 Reply

What Neck Shape do u use or like?

Started by Andries D. EKER in Building Secrets, Tips, Advice, Discussion. Last reply by Casey (Porkpie) Hazelman 3 hours ago. 32 Replies

Truss rods in lap steel?

Started by Henrik Jørgensen in Building Secrets, Tips, Advice, Discussion. Last reply by Henrik Jørgensen 9 hours ago. 2 Replies

Frets and fretboard

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Jerry Jordan yesterday. 9 Replies

Perma grit sandpaper

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Sunday. 4 Replies

Fret Sides Dressing

Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by Titch the Clown on Friday. 8 Replies

Slide off decals

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Friday. 10 Replies

30.5" scale lay-out help needed please!

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Thursday. 20 Replies

Break angle for bridge

Started by Fantacone Box Works in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner Jul 17. 28 Replies

Blog Posts

Getting ready for next build

Posted by Sean Murphy on July 17, 2019 at 12:54pm 3 Comments

What wood is this?

Posted by Sean Murphy on July 16, 2019 at 10:48am 7 Comments

apology

Posted by Danny Gordon on July 13, 2019 at 7:30pm 3 Comments

Latest Activity

Downtown Vinnie posted a video
28 minutes ago
Nasty DeVille commented on Dave Lynas's video
Thumbnail

The Rabbit and My 22

"Well played sir! An awesome song and a cool video too! "
1 hour ago
Nasty DeVille liked Dave Lynas's video
1 hour ago
John VanHoozer replied to Myron Joe Hickel's discussion Just sayin' Hey from Abiquiu, NM in the group Introduce Yourself!
"Ramen... I've got about 20 boxes sittin' around, ready to get fitted up!"
2 hours ago
Blues Frog replied to Myron Joe Hickel's discussion Just sayin' Hey from Abiquiu, NM in the group Introduce Yourself!
"Welcome to the addiction. It starts out with one and then you have to build more.  Be…"
2 hours ago
Gallo Y Arbusto updated their profile
2 hours ago
Clint Spotts liked Trev Morson's discussion I just purchased a Teisco EP-15 - need help to date it?
2 hours ago
John VanHoozer replied to Myron Joe Hickel's discussion Just sayin' Hey from Abiquiu, NM in the group Introduce Yourself!
"Welcome, Myron! I'm down in Santa Fe and hang out at make santa Fe. There is another cbg fan…"
2 hours ago
Taffy Evans replied to Sincerely, Iris's discussion License Plate Buzzing
"Hi, try increasing the downward pressure of the strings on the bridge. One way I can see of doing…"
2 hours ago
Sincerely, Iris posted a discussion

License Plate Buzzing

Hi Folks,It's been a too damned long since I posted on here. I was wondering if you all knew any…See More
3 hours ago
Casey (Porkpie) Hazelman replied to Andries D. EKER's discussion What Neck Shape do u use or like?
"I like the chunky shapes. The soft chunky V is very comfortable and guides the thumb into the…"
3 hours ago
Brother3String liked Andries D. EKER's video
3 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->