I wonder what people think about putting the volume knob on the top side of the box rather than through the lid. Seems like the knob can get in the way when strumming, especially with a smaller box. Most people seem to put the knobs on the lid, in the corner near the bridge.

related question: if the side or the lid is too thick for the potentiometer shaft length, is it better to remove some material to thin the wood, or just buy a pot with a longer shaft?

Views: 173

Reply to This

Replies to This Discussion

I have seen knobs on the upper left corner(RH guitar) by the neck. As far as thickness goes either option works. There are builders who have 4 band equalizer on the side, no reason not having knobs there also. Number one rule for CBG's "There are no rules"!

Hi Michael, I've pt the knobs both on the lid and on the top. It's just a matter of YOUR preference. No rules in cbg building.
As to the second question. I make a thin face plate for the knobs and Jack. I then cut a hole in my cbg slightly smaller than the face plate, so i can mount knobs to face plate, run my wires, then i mount the face plate , with per attached knobs over that hole in the thick cbg wall or lid (wherever your'e mounting) .
Hope this helps.
Rock on,
Poor Steve

Thanks. Yes, I thought about using a plate.

Meh .,,, put em anywhere  ;-)

I always want to do it different, but you take the prize!

That's different!

That's definitely new to me.
You have a cable running the length of the neck on the top of it?

yeah,  it runs down the truss rod channel . since the jack is in the head too. ;-)  it's  glued in and   sunk flush . it just looks protruding in the pic .

That's wicked!
If at some point you can be bothered, I'd appreciate a picture of the instrument in full :)

Here's a vid .. there's some other weird stuff in there . lol . it's electric razor powered . ;-) 


Find more videos like this on Cigar Box Nation

One of a kind! I especially love the slide holster.
What are those two pegs protruding from the pickup area?

Pegs are from the horseshoe coil that was in the electric razor . i used the coil as a pickup ,  it seems to pick up between the poles , middle string is a bit quieter than the rest ,  but not too noticeable .

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Looking for Builders and Players in Florida!

Started by Will "KOOL DOG HOOCH" Bonner in Fests and Concerts: Organizing and Promoting. Last reply by the anonymous pick 6 hours ago. 9 Replies

Secret codes?

Started by Will "KOOL DOG HOOCH" Bonner in Performances, How to Play, Lessons, Concerts. Last reply by Will "KOOL DOG HOOCH" Bonner on Monday. 21 Replies

Mini Documentary: Henry Dervaric's Cigar Box Guitars [Dandelion TV]

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by GARAGE HERMIT on Sunday. 4 Replies

Zero fret/nut idea

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Tom T on Sunday. 6 Replies

Rescued ss can.

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Saturday. 8 Replies

Box fiddle #1

Started by Gervase Gallant in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner on Saturday. 5 Replies

Building Advice

Started by Jonathan Buttazoni in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans on Friday. 2 Replies

Latest Activity

Daniel Walter posted a status
"Sorry folks....in the posting mode.....keeping me from working on my build. jeez."
1 hour ago
Daniel Walter posted photos
1 hour ago
Chris Sturhann replied to Chris Sturhann's discussion Pickup Placement on High G Ukulele in the group Building a Cigar Box Guitar 101
"Thanks, Christopher. I know a lot people who play low G. There are a lot of advantages to it,…"
1 hour ago
Daniel Walter commented on Daniel Walter's photo
Thumbnail

scary fun.

"progress UJ. third sound hole."
1 hour ago
Andries D. EKER commented on Daniel Walter's photo
1 hour ago
Andries D. EKER left a comment for Dave Lynas
"it seems like the most logical place to put em! you dont agree? see your workspace is getting…"
1 hour ago
Andries D. EKER left a comment for Keith Rearick
"Thanks for all the likes on the Owl pictures there Keith appriciated !"
1 hour ago
Andries D. EKER left a comment for T-Gripped
"Thanks T Glad you liked it ! will do sound  sample soon ! thanks for the kind comments !…"
1 hour ago
Andries D. EKER commented on Dar Stellabotta's video
Thumbnail

First 6 string cigar box guitar build

"Nice build Dar , looking rockready!,good to have a supporting famely! but geeezz you can do that on…"
1 hour ago
Christopher G Daniels replied to Chris Sturhann's discussion Pickup Placement on High G Ukulele in the group Building a Cigar Box Guitar 101
"Sorry I'm going to be wet blanket here, but the disc piezos are just not sensitive for the…"
1 hour ago
Daniel Walter commented on the anonymous pick's photo
Thumbnail

SWAMP WITCH GUITARS BECAUSE

"does that have 4-80 air conditioning?"
2 hours ago
Daniel Walter commented on Dave Lynas's photo
2 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->