Not that I didn't believe anyone here, but....

I talked to my son, a journeyman/forman induetrial electrician, and he fully agrees to go DC.

OK. Anyone want to but a variac?

But, I'm asking for help. Would someone skim Amazon/ebay for a 6/12v power supply that would work? I don't want to start throwing good money after bad and i am clueless on what to get. I want to build that wood rig, not one of those foam cutter hand-helds.

1. $'s is a consideration.
2. As everyone is saying, safety is an issue also.

I just don't have any idea what to get.

Views: 193

Reply to This

Replies to This Discussion

doesnty matter how its built hand held or a rig like the video you showed. for a 2" bit of nichrome wire to burn a fret line on a neck all you need is a 9V battery. all very safe except for the wire itself that gets very hot. use an old car battery if you want. DC is safer than AC. 

What about the DC amps?

Would something like this work? (obviously with the output terminated differently)

Don't you have any AC to DC adapters (wall warts) laying around to try?  I sure do.  I think this should work.  You could plug into a cheap switched power strip.

seems like a lot of work to replace a Square & a Woodburner, just saying?

Yep I agree Brian Q. At least with a wood burner you can change the tips and do fret position markers too.


Brian and Taff...

I tried a soldering iron with a needle and chisel tip and while it works, I was not happy with the time or result. There's just something about that hot wire making a perfect line that resonates with me...

BTW I just looked closer and the resistance on the wire I bought is 1.31 ohms/ft.

I’m using a real wood burner, not a soldering iron, anything takes a little practice, even with the right tool? 

What's the difference?

I thought the gizmo in the vid was pretty cool and well thought out.  Some folks just like making things  :)  

That'd be me...

To be honest, it's something I discovered about myself not long ago. Never knew before that I could do it...

Is there some reason you didn't wan to use an automotive battery charger like in the video?

Mainly because of pushback from here...


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


How to Get Your Own Music on Spotify

Started by Shane Speal in Feature Articles 7 hours ago. 0 Replies


Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by Jerry Jordan yesterday. 2 Replies

s/s lm386 draw amp,

Started by GARAGE HERMIT in Building Secrets, Tips, Advice, Discussion. Last reply by GARAGE HERMIT yesterday. 9 Replies

Nut milling

Started by Lothar Ahnert in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans yesterday. 3 Replies

Latest Activity

Jim Codog replied to Jim Codog's discussion Magnetic Pickups - What's good in the group Building a Cigar Box Guitar 101
"Funny you should mention the bridge piezo rod, just watched a video on that and it looks great, but…"
5 minutes ago
Taffy Evans replied to Paul Craig's discussion What's on your workbench?
"Hey Hooch, that cbg came out looking real good. If that's what you do on a picnic table I cant…"
30 minutes ago
Taffy Evans replied to Taffy Evans's discussion The Journeys End. The Drought Breaker Resonator.
"Hi , Thanks guys,  I don't know why those photos fell over. My new slide bar just…"
38 minutes ago
KOOL DOG HOOCH replied to Paul Craig's discussion What's on your workbench?
"Thank you. The fret markers are cigar bands( same brand as the box) and an inlaid necklace …"
1 hour ago
Glenn Kaiser commented on Glenn Kaiser's blog post Fresh Christmas Tune- Free Download Link
"Welcome BrianQ, thanks for the kind word. -Glenn"
1 hour ago
Keith Rearick liked Dave Lynas's video
1 hour ago
Keith Rearick liked AGP #'s video
1 hour ago
Keith Rearick liked shane wagstaff's video
1 hour ago
Keith Rearick liked Ville Vornanen's video
1 hour ago
Keith Rearick liked Andries D. EKER's video
1 hour ago
Keith Rearick liked Downtown Vinnie's video
1 hour ago
Keith Rearick liked Jason Mills's video
1 hour ago



© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->