You *can* fret directly onto your neck piece of wood.  Notice Shane's fretless builds, he burns fret markers directly into the neck wood, and strings her up!  Frets aren't going to weaken the wood.  If you use a round over bit on a router to shape your neck, then put on a fretboard ... and 3/4" thick neck, with a 1/4" fretboard makes a big fat 1 inch thick neck!  Not everyone likes baseball bats for necks. 

Views: 342

Reply to This

Replies to This Discussion

No, it's not necessary but two or more pieces laminated together should be much less likely to bow or twist than a single piece of wood.

A fretboard is rarely a necessity on a 3 or 4 stringer, but along with rigidity, it presents options re action  height, and much more, you can play with the contrast of different timbers etc, but overall ,it gives you the best chance of minimising distortion, and a better chance of sitting for a few months and just needing a tuning tweak to play, Shane's fretless builds are as you say fretless, with enough height it could be a banana, and Shane could make it sound ok, but it's nice to pick up a guitar that's been neglected for a few months, tweak the tuners 1/2 a step and play

Hi, couple of things not mentioned yet.

It depends on the timber used for the neck.

A fingerboard timber is normally denser than the neck and can provide provide stability and better holding power for frets.

Im not sure if adding a fingerboard adds more depth to the neck, making it clubby, because I would have to add that much more thickness to the neck timber, for stability.

And maybe less than firm fitting frets in their slots or, a soft neck timber, could allow the neck to compress under string pressure and bow up, over time.

Just things I weigh up before building.

Taff

I've never seen the need for a fretboard on a CBG, most of the ones I've made are with broom handles or lengths of 2x1, rigidity is never an issue and all that is needed is a slide to actually play the thing. the only time frets and a fretboard come into play is when I use a second hand 6 string neck for one of my builds and even then, the slide is still a good option, it just suits the style of guitar.

I actually use both methods, cutting frets directly into the neck, and cutting into fret boards. I've had no problems with bowing or twisting thanks to laminating the neck. I think it's easier cutting accurately into a fret board using my jigs, however I love the look of the fretted neck.

Attachments:

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor


Recommended Links & Resources


Forum

Cigar Box Amp Mods

Started by Cigar Box Nation in Feature Articles. Last reply by Steve Allen Sep 10. 13 Replies

Blog Posts

Mr. Bells

Posted by Stephen Cohen on September 4, 2021 at 12:30pm 0 Comments

Bookie's Poor Man's Dobro

Posted by Steve Bookout on July 18, 2021 at 2:04pm 3 Comments

Get your groove on for free

Posted by François on July 13, 2021 at 3:05pm 1 Comment

Soon to be free to play more

Posted by Danny Gordon on June 14, 2021 at 1:06pm 4 Comments

Latest Activity

Cigar Box Blues commented on Gary O'slide's video
1 hour ago
Jerry Jordan replied to Uncle John's discussion Dave Lynas needs prayer and good thoughts and wishes
1 hour ago
Jerry Jordan commented on T-Gripped's photo
Thumbnail

AF box

"This is the kind of guit I like to build and play,. You did a great job.! Nice striping on the FB"
1 hour ago
Glenn Kaiser replied to Uncle John's discussion Dave Lynas needs prayer and good thoughts and wishes
"Thx Uncle John. Continuing to pray for Dave and his wife and family. -Glenn"
6 hours ago
Gary O'slide posted a video
7 hours ago
Doug Thorsvik commented on Rob Uker's photo
Thumbnail

Campground Ukes

"I can see why Rob! Your ukes are cool!"
9 hours ago
Doug Thorsvik commented on T-Gripped's photo
Thumbnail

AF box

"Arturo Fuente boxes are pretty much the perfect size for a CBG! I agree with Uncle John. Though…"
9 hours ago
Uncle John commented on T-Gripped's photo
Thumbnail

AF box

"I can only give you Cs on this one. Clean, Classy and Classic. Excellent."
11 hours ago
Uncle John commented on Mark E. Martinsen's photo
Thumbnail

20210903_150826

"Cool pics and guitars!"
11 hours ago
Uncle John replied to Uncle John's discussion Dave Lynas needs prayer and good thoughts and wishes
"Dave Lynas's home town (Duluth) friend, Tony, was kind enough to tell me that Dave's…"
11 hours ago
Doug Thorsvik commented on Korrigan's video
Thumbnail

Justine, the tenor guitar, GDAD

"Great choice of a song to cover Korrigan! One of my favorite songs. Outstanding arrangement, guitar…"
12 hours ago
GARAGE HERMIT liked Doug Thorsvik's video
12 hours ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->