Replies to This Discussion

Permalink Reply by gary herget on March 15, 2014 at 3:49pm

sounds like you really scored. Enjoy working with all the new stuff, figuring out just how many things you can now do better than before.

• ▶ Reply

Permalink Reply by Cause the Blue rat on March 16, 2014 at 3:20am

You bet Gary! The band saw will really help out when making all the small cuts I was doing on the table saw.

The only one I know how to use is the drill press. Watching band saw vids on Youtube. Learning how to set the guides, angle and blade tension. Even seen a great trick on how to get a blade back into a small circle. Even learning what blades are good for what. There's a lot of great vids. Not really sure what to do with the router table. Came with a nice bull nosing bit. And one that looks like it's for making rabbit joints. The third one looks like it's for mimicking bead board.

• ▶ Reply

Permalink Reply by Thomas "Duck" Petry on March 18, 2014 at 6:36pm

Sounds good, but we need pictures. :D

• ▶ Reply

Permalink Reply by Slowpaw Steve T on March 18, 2014 at 11:49pm

well done! (-:

• ▶ Reply

Permalink Reply by William McCauley on March 19, 2014 at 9:21am

I wanna see a pic of the router/jointer set up. Sounds like you really scored. 

• ▶ Reply

Permalink Reply by Cause the Blue rat on March 19, 2014 at 1:10pm

Thanks folks! Be a wile on pictures. Want to get all this stuff out of my living room. Still working on the garage.

• ▶ Reply

Permalink Reply by William McCauley on March 19, 2014 at 2:19pm

I know what you're up against, had a BSA Rocket 3 in an apartment once,a loooooong time ago.

• ▶ Reply

Permalink Reply by Thomas "Duck" Petry on March 19, 2014 at 5:48pm

Think a lot of us have been there. Rebuilt a VW engine on a card table in the living room back in the '80s.

• ▶ Reply