Replies to This Discussion

Permalink Reply by Paul Craig on October 20, 2015 at 8:31pm

Deltagrooveguitars.com  They make a 3 pole and 4 pole P90 style pup that sound good. They probably cut their mags down with a cutoff wheel on a dremel, but not sure. They don't cost much so experiments won't set you back much.

• ▶ Reply

Permalink Reply by Ken Wachholz on October 21, 2015 at 3:40am

Bought one of their PU a while back for a 1/2 a 12 string CBG I made and their pretty much just a Strat style single coil. Sound nice though. The ones I've made cost less than $6 each parts wise.

Thought about this some more last night and adding a another hole in the middle of the P90's from Gitty really wouldn't be that hard to do.

• ▶ Reply

Permalink Reply by Skeesix on October 23, 2015 at 5:53am

I made one of these using small magnets per Jason Lollar's pickup winding book.

http://cigarboxguitars.com/resources/workshops/pickup-workshop

Stew Mac posted a how-to and used one of their bar magnets cut in half. They said you can use a Dremel cut off wheel or hacksaw. I think I might go with a hacksaw and try to keep it cool. You can always remagnetize with a neo magnet if you need to.

http://www.stewmac.com/How-To/Trade_Secrets/Build_your_own_custom_p...

• ▶ Reply