Ok got the tuners on the way and ordered 2.9mm fretts.  and a pickup too , so far im into this $50 for those parts, $15 for the box and say$16 for the Tassy Oak neck and finger board. now do i get the individual bridge pieces or get the 4 string bridge and cut it down? this is going to be an electric build due to the thick lid on the box.  with strings this is going to com to approx $150 AUD .... could have got a bass from Cash converters cheaper.... nah where is the fun in that..

but seriously if you have built a bass what did you use for the bridge?

Views: 258

Reply to This

Replies to This Discussion

Hi, I would remove all saddles, redrill the screw holes in the back of the bridge x3 at the spacing I require. 

Reassemble with three saddles. The individual saddles may need shimming to get correct saddle Hight.

I got value for money by building my "Breadboard" 2 stringer, just cut the bridge in half.

Taff

I've used the individual ones with  great results and spacing is not an issue . you can also  use the thru body anchor method ,  and use lighter bass strings . and any homemade  bridge you want .

Also  , to save  money ,  warp worry , and intimidation , ... you can  make a 2 or 3 string  short scale bass. 25 inch scale  and use  number .60 and.52 strings from a special set of “ ghs boomers “  or  drop d tuning  guitar strings . and they still fit regular guitar tuner holes . Combined  a forward pup placement , it’s a sweet lil bass . and since it’s all “guitar” parts , it can easily be converted to a “regular guitar string” equipped 2 or 3 stringer. I have made a few like this .

easy peasy lemon squeezy. ;-)

the individual ones are slightly dearer but i think i like the look better.... 

I I made a 3-string bass with a 5-string bridge, just removing the 2 outer saddles. Worked out pretty well and It was less that $15 on Ebay.

i thought of doing this as well. i dont think my box is as wide as that one . i was worried the bridge would look too massive..  my box is 7 3/4"wide.

Mine is 9"...  And I'm not exaggerating. :D

I think it would work fine on a 7 3/4" box.

the one i was looking at is 3 7/8" wide. if my math works that leaves 1 15/16" each side of the bridge to the edge of the box.. might look a bit large . 

curious, what scale length did you use and what string guage?

I did 25.5" scale, flatwounds, E1 .090, A1 .065, D2 .050

The bridge I have is 3.5" wide.

Nice looking three stringer, Korrigan. What p/u did you use?

Thanks! It's an MGB Mini Box Bucker 4.0.

I used the single bridges. Worked great.

thats what i ended up getting. will give a cleaner look i feel.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
18 minutes ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
31 minutes ago
BrianQ. commented on Dar Stellabotta's video
4 hours ago
BrianQ. liked Dar Stellabotta's video
4 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
7 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
7 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
8 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
8 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
10 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
10 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
11 hours ago
A.D.EKER commented on Ricky D's photo
11 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->