Hello all! Happy to have been accepted and can’t wait to get into the blogs and discussions! Have materials and parts for 3 CBGs and getting ready to start the 1st build. What is a good string height for fretted (10mm seems to be popular) and if I do a back angle does the lid sit directly on the neck or should I have a space there? Also using a bottle cap piezo so does that make a difference with the spacing of lid to neck? Thanks for your time!!

Views: 151

Reply to This

Replies to This Discussion

Welcome to CBN, it is slow right now not much activity. Most of the questions you have asked are subjective to how comfortable the cbg feels in your hand. For me 2.5 mm or 1/8th inch at the 12th fret and at the first fret just high enough to slide a business card between the fret and string. If I have a fretboard on top of the neck I use its thickness as a guide for how high above the sound board I place it. My back angle is about a 3/16 to a 1/4 inch lower at the bridge it just depends on where I place the bridge and the fret scale I used. The bottle cap piezo will work on vibrations of the sound board more than string movement. 

Come to think of it My first cbg I made had a very high string it was close to 10mm and although it did not have a fret board I remember trying to fret it at the 2nd fret D string and darn near ripping my finger nail off. Bled for about 15 minutes. I think it was Lennys CBG 101 on youtube. 

If I was you I would learn as much as you possibly can from your first build, use it to try out things and take your time. 

Joe

The silent forum strikes again.

Measure & use the string height of your favorite electric or acoustic guitar (depending which strings you plan to use).

Actually don’t own any other guitars. I think I remember seeing somewhere (I’ve watched SO MANY videos and read SO MANY articles) that at the 1st fret it should be like 1-2 playing card height and like 10 cards at the 12th or something like that. Can’t seem to find the info again.

I wouldn`t worry too much about the string height as you can always make it high, then try it out and lower it to suit yourself. It`s easier if the nut is bone and can be filed down rather tan using a bolt but even that can be adjusted by lowering the slot where the bolt sits.

The bridge, likewise can easily be adjusted to suit yourself. The fact is you`ll be best to keep your first build as simple as possible and learn from it. Guaranteed that you will end up making more.... many more! 

Probably the best tip is to fret it first then work on the nut and bridge.

Want to say THANK YOU to everyone that has given me advice/tips and links to follow to help with my first build. Am planning to hit it hard tomorrow and will definitely drop pics when I finish. Such an awesome community!!!!

Hi Jason, lots of good info already offered on action hieght 

. I was a bit confused regarding your 10mm reference, I think you were referring to the bridge height. If so, 15mm is an area I shoot for. it gives a good break angle for the string and puts the pressure "loading' down onto the top for better response.
The top needs to vibrate to create sound within the box, anything that impedes this vibration limits the volume and tone. So I keep the neck away from the top if I do a neck-through style. However, I always go for bolt-on necks as these are adjustable.

As your piezo picks up timber vibrations, experimentation with positioning gets the best response for a particular instrument. this is due to the different materials a box can be made of, size, and bridge positioning will all impact on output and tone.

Glad to hear that you have done a lot of research, it will pay off in the long run.

Oh, I don't normally ever measure with business cards, how thick are they? Just measured 50mm stack = about 92 cards. I'll stick with rulers and feeler gauges, Haha.
Cheers Taff

I have a stack of old gift cards & hotel room key cards.  They come in handy for measuring & for temporary shims.  Most measure right at .030".

If you don’t have one of these, then get one, well worth the 4 bucks & free shipping from MGB.  Card sized, but unlike playing cards, it has a way to accurately measure & has several modes of measure: inches- 32/64ths,millimeters, centimeters,Etc. I also use it as a straight edge for leveling frets? Cheers :)

Yep, that's what I have been using Brian Q, to set action. I use feeler gauges for measuring at the nut. I use lengths of aluminium flat bar marked with fret positions and scale lengths, and of course steel rules, foldeing carpenters rules and of course tape measures. How many? Not telling, you would fall over laughing. Oh, then there's the three vernier gauges and.......I still get it wrong if I don't measure twice. No joke.
Taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor


Recommended Links & Resources


Forum

Cigar Box Amp Mods

Started by Cigar Box Nation in Feature Articles. Last reply by Steve Allen Sep 10. 13 Replies

Blog Posts

Mr. Bells

Posted by Stephen Cohen on September 4, 2021 at 12:30pm 0 Comments

Bookie's Poor Man's Dobro

Posted by Steve Bookout on July 18, 2021 at 2:04pm 3 Comments

Get your groove on for free

Posted by François on July 13, 2021 at 3:05pm 1 Comment

Soon to be free to play more

Posted by Danny Gordon on June 14, 2021 at 1:06pm 4 Comments

Latest Activity

Maddog commented on Maddog's photo
28 seconds ago
Maddog commented on Maddog's photo
Thumbnail

Amp #149 Cremo CBA

"Thank you Doug and Steve!"
1 minute ago
Maddog replied to Uncle John's discussion Dave Lynas needs prayer and good thoughts and wishes
"Thanks for the update John. God Bless Dave and God Bless his Family. "
2 minutes ago
Uncle John commented on Gary O'slide's video
25 minutes ago
Uncle John replied to Uncle John's discussion Dave Lynas needs prayer and good thoughts and wishes
"Friday AM.   Dave has not been awake for much of a day.  The family thinks the end…"
29 minutes ago
Cigar Box Blues commented on Gary O'slide's video
2 hours ago
Jerry Jordan replied to Uncle John's discussion Dave Lynas needs prayer and good thoughts and wishes
2 hours ago
Jerry Jordan commented on T-Gripped's photo
Thumbnail

AF box

"This is the kind of guit I like to build and play,. You did a great job.! Nice striping on the FB"
2 hours ago
Glenn Kaiser replied to Uncle John's discussion Dave Lynas needs prayer and good thoughts and wishes
"Thx Uncle John. Continuing to pray for Dave and his wife and family. -Glenn"
7 hours ago
Gary O'slide posted a video
7 hours ago
Doug Thorsvik commented on Rob Uker's photo
Thumbnail

Campground Ukes

"I can see why Rob! Your ukes are cool!"
10 hours ago
Doug Thorsvik commented on T-Gripped's photo
Thumbnail

AF box

"Arturo Fuente boxes are pretty much the perfect size for a CBG! I agree with Uncle John. Though…"
10 hours ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->