Hey everybody,
I recently got this little Fender Frontman 15R project from a nice fellow that had an ad in Craigslist. Free. Sweet! He told me it wouldn't come on and that he had poked around looking for an obvious short, but didn't really have the knowledge nor resources to thoroughly inspect it.

Since I know just about enough about electronics to get me into trouble, and I had just purchased a multi-meter, I brought it home and took the amp apart. Now I have been studying on how to make low-power LM386 style amps for a few months, but have yet to start a project.

Once I got it home I plugged it in and as expected, I got no "On" light and no sound whatsoever.

I got the back off it, I poked around inside and wiggled a few wires, but didn't see anything. I put the back back on and plugged it in, turned it on and the light came on, and normal-sounding hum came from the speaker. Plugged one of my guitars in and got nothing but hum. So, off came the handle and the rest of the hardware necessary to pull the circuit board stuff out. As I was checking the wire connectors on the on/off switch, the ground wire just popped out of the connector. I don't know, but suspect that this amp has been messed with inside since sold new. The bare wire was less than 1/8 in long when crimped. No wire was left in the half-crimped connector. So I replaced the connector with a new one. As I was taking one last look inside and getting it ready to button back together for a test run, I found this:

 The chip in the circuit board (Upper right) and the solder on the metal cover.

From the other side:

So, is this silly looking wad of solder on the cover of the jack from the factory, or someone needing to ground the already broken board? I would like to get everyone's suggestions on how to best go about fixing this thing. Scrape to bare copper and try to wire in a conventional jack, or something else? I have very little money to put into this thing, so I might wind up scrapping it and just using the pots and other bits for home-made cigar box amps. The only other amp I have is a Micro-Cube, (Love it!) My soldering skills are fair to good. I really don't want to scrap it since it is in otherwise very good shape. What would YOU do? Would you fix it, and if so, how would you fix it?

Any suggestions would be VERY much appreciated.

Views: 286

Attachments:

Reply to This

Replies to This Discussion

 I'd love to hear what you tried to say, Hooch!

I have the 15G, how can I help?

How do you like the 15G?

Hi there! You got through. You tried so hard to reach me, I just sent you a "friend" request just trying to give you some method of contact. How are ya? 

 As far as help on this amp goes, thank you, I think I have a plan to fix it, but I am waiting now to be able to get a soldering tip. I don't have the right one for the fix. 

  I remember coming across this video a few years ago, he’s got same problem you do?

https://www.youtube.com/watch?v=RoGR3vmHSlI

Thank you BrianQ! It's very close to the same problem, the same guy did this one: https://www.youtube.com/watch?v=F8I_Tyd8JmU that is exactly the problem that I had except my version had the added issue with the heatsink/cover/ground/whattheheckisit on mine.

Thanks again!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

Latest Activity

AGP # commented on A.D.EKER's video
Thumbnail

There i was Standing at the ..... BCB - A. D. Eker 2024

"A Different, but very Likeable take on a Classic Blues Song :-)"
36 minutes ago
AGP # liked A.D.EKER's video
37 minutes ago
T-Gripped liked David Hopkins's photo
5 hours ago
Jim Weaver updated their profile
6 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

There i was Standing at the ..... BCB - A. D. Eker 2024

"I tryed something differend whit the crossroad consept, thanks for listening ! appreciated !"
7 hours ago
Dar Stellabotta commented on Dar Stellabotta's video
Thumbnail

Cigar Box Guitar 106 now for sale 🙌

"Thanks everyone! Yes it is inspiring to own other cigar box guitar builders creations. I have many…"
14 hours ago
A.D.EKER replied to Southern Ray's discussion AI Search Query - Curious Answer
"Nice one Korigan !  The Vinger Slascher ?"
16 hours ago
A.D.EKER commented on Doug Thorsvik's video
17 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

I Can Only Imagine: 2-String Chugger License Plate Cigar Box Guitar

"Head Slingers "The Steady Crew " Right On !"
17 hours ago
A.D.EKER commented on Dar Stellabotta's video
Thumbnail

Cigar Box Guitar 106 now for sale 🙌

"crunch Rocking DAR ! nice kit ! jangling julery! Slash Dar Johnson!! now on stage !!"
17 hours ago
A.D.EKER commented on A.D.EKER's video
17 hours ago
A.D.EKER posted a video

There i was Standing at the ..... BCB - A. D. Eker 2024

The Robert Johnson fight whit the devil, and there he was , standing on the Crossroads, waiting to meet the Guy that was going to change his way's, did he w...
17 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->