Replies to This Discussion

Permalink Reply by Timothy Hunter on March 11, 2020 at 12:30am

looks good... plans are 18 EURO...

https://www.paoson.com/en/shop-woodworking-plans/39-3d-router-plans... 

Have you seen the X Carve? 

https://www.youtube.com/watch?v=ms12PIIDTew

not cheap but i think there are clones around...

• ▶ Reply

Permalink Reply by KOOL DOG HOOCH on March 11, 2020 at 2:11am

My thoughts are with this setup a few mods and the electronics from the vertical cbc you could do anything. Using the following attachment and a dremel saw a fret cutting jig would be possible.

• ▶ Reply

Permalink Reply by Taffy Evans on March 11, 2020 at 12:44pm

• ▶ Reply

Permalink Reply by Taffy Evans on March 11, 2020 at 12:44pm

• ▶ Reply

Permalink Reply by KOOL DOG HOOCH on March 11, 2020 at 2:04pm

Can any one else see Taff's reply? This is getting a little annoying!

• ▶ Reply

Permalink Reply by Timothy Hunter on March 11, 2020 at 11:37pm

no , i cant either.

• ▶ Reply

Permalink Reply by KOOL DOG HOOCH on March 11, 2020 at 11:42pm

Ok Taff, stop with the invisible ink or choose a larger font!lol

• ▶ Reply

Permalink Reply by Timothy Hunter on March 18, 2020 at 1:58am

bloody invisible ink is back....cut and paste of my original post....

https://www.youtube.com/watch?v=JMmvyaBUhO8

check this out Hooch. small portable workbench with vice... 

• ▶ Reply

Permalink Reply by Southern Ray on March 19, 2020 at 6:06am

That's pretty cool, but... I get excited when I can afford tuners AND strings... HA!

• ▶ Reply

Permalink Reply by Southern Ray on March 19, 2020 at 6:26am

 I really didn't mean to be flip with my last post and I am sorry if it sounded that way. I'm a retired old-school machinist, (among other things), and I prefer the manual machines to the CNC versions. I was trained in programming through production in CNC and made a lot of chips in my day. I got into CBG building as a way to relax. Tired of the noise of power tools and machinery, I really enjoy hand-making guitars with hand tools.My one-year old rasp and a twenty year old pair of calipers are my favorite guitar building tools. I have powered hand tools, but just don't use them much anymore. Sorry, didn't mean to make light of your find.

By the way, I dig your posts.

Ray

• ▶ Reply

Permalink Reply by Timothy Hunter on March 19, 2020 at 9:48pm

back in 1982 i was a CNC programmer too. for a Laser cutter.  we had to hand code on to punched tape and take it to the laser to read the tape... things have changed a lot...lol

• ▶ Reply