Hi, I thought I would post a few photos of a build journey a few pics at a time to save a big lengthy post at the end of the process.
This may be of interest to some members as there appears to be quite a bit of interest on here regarding Resonator guitars., and this is my journey to building a low-cost full-size resonator guitar.
This is the first time, other than the very first instrument I built, a mountain dulcimer back the early 1970’s, that I have built using plywood. And its not instrument grade laminated timber its hardware shop grade 3 ply. You know the stuff that bows up like a photograph in the sun. For this reason, as soon as I got it home, I cut it up into usable dimensions and put weights on the pieces. But that might depend on where one lives.
I will not show every stage but mainly the important milestones with some comments along the way. Enjoy…. I hope…………………….
Next, working on the back. Taff
Tags:
Killer job! I bet it sounds and plays like a dream. Thanks for sharing.
Looks great and thanks for sharing. Always interesting to see how others do it.
Hi, that's a nice looking resonator Tom T.
The sides were easy to bend compared to many solid timber sides. I used the Fox type bender that I built some years ago. The Bender was developed by Luthier Charles Fox and has undergone several transformations over the years. This one is heated by three heat globes, but now I also use a silicone heat blanket. It gives me an even better outcome. I make a sandwich with the timber in the middle and spritzed with water, either side of that is brown paper also wetted and either side of that aluminium slats. In the mix is the heat blanket.
But for years I did side bending on a hot pipe in the traditional manner.
Hi again, here I’m showing the back. And it’s of one piece 3 ply which means not having to slice and book match the timbers, also no inlay strip or reinforcing down the middle. This is also the first time I have used solid linings and not kerfed ones, so it was a quick and easy process.
The bracing was cut from my normal Sitka spruce stock and glued up and shaped in the usual way, and the ends checked into the sides. The back was glued onto the rims first this time [I normally do the top first] as I did not have to voice/tune the top bracing this time.
Next step is the Top, cut the hole for the cone and bracing and fitting. Cheers Taff
What can I say?
Absolute top quality work. Love seeing it.
true that. he makes it look so easy... tempted to have a go but i know i havent got the patience or talent for a propper guitar..
Hey Timothy, you just made my day. My idea with this post was to show the building of a relatively easy full size guitar using basic cheap materials,and hopefully have some members at least think, Hmmmm?
To have you use the word tempted, is very gratifying.
I've got a story I planned for the end of this thread that may address the other two words you used, patience and talent.
Nearly ready to post the Top and neck and fretting segments.
Taff
Hi once again, this time I focus on the top. Again, it’s just cheap 3 ply.
Once I have plotted the scale length, a 25” scale with 12 frets to the body, to find where the cone will sit I mark the centre and drill a 3/16” hole to locate my hole cutting router/devise so as to make the large opening for the cone.
Then I plot the soundholes making sure they miss the braces under the top. Once soundholes are done I cut, fit and carve the braces. These are heavier than usual as they must resist the extra tension of the strings. This a square neck lap steel resonator so the strings are high, about 3/8’ off the fingerboard.
After the braces are fitted, I mount the cone support ring onto the inside of the top, this is also ply in this guitar. I then transfer the brace positions onto the sides and check out for the ends of the braces to fit into the sides/linings. Then I glue the top to the rims. I use my go-bar deck, I find it very quick, or you could use clamps, or spool clamps.
There are a few more photos of the Top process, Ill post those a bit later. Cheers Taff
Looking great as usual Taff. ;)
Hi taffy. This is 'true skill' mate and inspirational to me. Great stuff
Taffy., you do stellar work,.,.,I must admit I always drool over your tool selection.,.,.looks like a lifetimes worth of experience.,.,
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. 9 hours ago. 4 Replies 0 Likes
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by A.D.EKER yesterday. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango on Tuesday. 4 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods on Saturday. 7 Replies 1 Like
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!