I just completed construction a a Gitty license plate guitar. After I added the strings and started to adjust the strings, I noticed the action was so low that the strings are hitting the frets and giving a real tinny sound. I need to raise the action some. What is the best method of raising the action? 

  The open space under the license plate seems to be contributing as the bridge lowers as the strings tighten.

Views: 186

Replies to This Discussion

 Some of those license plates could be a little bendy, run a brace inside, across the body. 

First, do the internal bracing that BrianQ recommended.  If you still more clearance you can build up your bridge with a piece of hardwood as a foundation and or change the nut.

Hi rick, also check for high frets in buzzing area. A short straight edge over three frets and if rocking is evident you found a high fret.

Taff

Taff

i know they have fancy luthier ways of handling that fret.  Do you hit it with a file or is that not cool?

thanks

Hi Tim, well if you come across a high fret there are a few ways to remedy it, and it depends on what has caused the high fret.

it could have just lifted out of its slot, now filing it ain't going to fix that, it's still going to be out of its slot when you finish filing. So applying glue and holding the fret down until it sets is the way in this case. 

Sometimes the fret slot may not be deep enough and holds the fret up, in this case I'd say remove the fret and rework the slot.

Sometimes it can be up due to an uneven fingerboard or lack of good levelling when first installed, then I would use a file to level the fret with the others. One then has to recrown the fret and polish.

sometimes a Factory guitar can have less than perfect fretting.  These do not become evident until the customer asks for a low action, so a simple job can turn into a not so simple one. A complete fret dress.

When I get a new guitar in because of a high action I immediately think, why? Often times it's to hide the buzzing caused by clumsy fret installation.

Taff

Thank you Taff,

I see what you are saying in each case.  Thank you for that knowledge, I know that comes for years of experience and I appreciate it.

tim

Good advice from the guys above, and keep in mind you might have multiple issues in play. A "tinny" sound may actually just be the tone you're getting due to the metal soundboard. Check carefully to make sure the license plate isn't buzzing against the frame, and also check to see if a string slot on the nut or bridge is causing a buzz. I've seen that many times. If you're noticing movement as the strings tighten I would definitely consider a bit of bracing under the bridge. You don't want it to be completely rigid but it may need some added support.

Madgomer,

would the sound be better If the plate were connected in a rigid way to the  bracing (glue or screw)?

Or the contact between the plate and bracing have a flexible connection (rubbery glue or a rubber washer)?

Or would the bracing be ideal around the sides, leaving the plate/soundboard free to vibrate in the center, unencumbered?   

or a center post mounted from inside the box to the underside of the plate?

Or some other type of approach?

thank for your thoughts

tim

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Latest Activity

Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
1 hour ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
1 hour ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
2 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
3 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
3 hours ago
A.D.EKER commented on Ricky D's photo
3 hours ago
A.D.EKER commented on A.D.EKER's video
3 hours ago
Keith Rearick liked Doug Thorsvik's video
7 hours ago
Keith Rearick liked A.D.EKER's video
7 hours ago
Keith Rearick liked Doug Thorsvik's video
7 hours ago
Keith Rearick liked Ricky D's photo
7 hours ago
Keith Rearick liked Ricky D's photo
7 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->